2016 Lexus GS F display

274
2. INTUITIVE PARKING ASSIST
GS_Navi+MM_OM30F12U_(U)15.09.01 12:22
zThe bumper or sensor receives a strong
impact.
z The vehicle is approaching a tall or curved
curb.
z In harsh sunlight or intense cold weather.
z The area directly under the bumpers is not
detected.
z If obstacles draw too close to the sensor.
z A non-genuine Lexus suspension (lowered
suspension etc.) is installed.
People may not be detected if they are
wearing certain types of clothing.
z The shape of the obstacle may prevent a
sensor from detecting it. Pay particular
attention to the following obstacles:
• Wires, fences, ropes, etc.
• Cotton, snow and other materials that
absorb sound waves
• Sharply-angled objects
•Low obstacles
• Tall obstacles with upper sections project- ing outwards in the direction of your vehi-
cle z
The following situations may occur during
use.
• Depending on the shape of the obstacle
and other factors, the detection distance
may shorten, or detection may be impos-
sible.
• Obstacles may not be detected if they are too close to the sensor.
• There will be a short delay between obstacle detection and display. Even at
slow speeds, there is a possibility that the
obstacle will come within the sensor’s
detection areas before the display is
shown and the warning beep sounds.
• Thin posts or objects lower than the sen- sor may not be detected for collision
when approached, even if they have been
detected once.
• It might be difficult to hear beeps due to the volume of audio system or air flow
noise of air conditioning system.
z Certification
X For vehicles sold in the U.S.A.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions; (1) This device
may not cause harmful interference, and
(2) this device must accept any
interference received, including
interference that may cause undesired
operation.
X For vehicles sold in Canada
This ISM device complies with Canadian
ICES-001.
Cet appareil ISM est conforme a la
norme NMB-001 du Canada.
zIn addition to the examples above, there
are instances in which, because of their
shapes, signs and other objects may be
judged by the sensor to be closer than
they are.

275
2. INTUITIVE PARKING ASSIST
GS_Navi+MM_OM30F12U_(U)15.09.01 12:22
PERIPHERAL MONITORING SYSTEM
7
WA R N I N G
●When using the intuitive parking assist
Observe the following precautions.
Failing to do so may result in the vehicle
being unable to be driven safely and pos-
sibly cause an accident.
• Do not use the sensor at speeds in excess of 6 mph (10 km/h).
• The sensors’ detection areas and reac- tion times are limited. When moving
forward or reversing, check the areas
surrounding the vehicle (especially the
sides of the vehicle) for safety, and drive
slowly, using the brake to control the
vehicle’s speed.
• Do not install accessories within the sensors’ detection areas.
NOTICE
●When using intuitive parking assist-sen-
sor
In the following situations, the system may
not function correctly due to a sensor
malfunction etc. Have the vehicle
checked by your Lexus dealer.
• The intuitive parking assist operation display flashes, and a beep sounds when
no obstacles are detected.
• If the area around a sensor collides with something, or is subjected to strong
impact.
• If the bumper collides with something.
• If the display shows continuously with- out a beep (except when mute is turned
on).
• If a display error occurs, first check the sensor.
If the error occurs even if there is no ice,
snow or mud on the sensor, it is likely
that the sensor is malfunctioning.
●Notes when washing the vehicle
Do not apply intensive bursts of water or
steam to the sensor area.
Doing so may result in the sensor mal-
functioning.

276
2. INTUITIVE PARKING ASSIST
GS_Navi+MM_OM30F12U_(U)15.09.01 12:22
zIf the location of sonar that cannot properly
detect obstacles is shown, remove the for-
eign matter from the sensor.
z If the failure warning does not go off even
after the foreign matter is removed, the
intuitive parking assist-sensor may be mal-
functioning. Have it checked by your Lexus
dealer.
z All sonar sensors display abnormally. Have
your vehicle inspected by your Lexus
dealer.
INTUITIVE PARKING ASSIST-
SENSOR FAILURE WARNING
If an error is detected when the intuitive
parking assist-sensor is turned on, the
vehicle symbol comes on or flashes with
beeping sounds.
INFORMATION
●
The intuitive parking assist-sensor failure
warning display is not given in either of
the following operations:
• Changing to another screen
• Turning off the main switch for the intui- tive parking assist-sensor
WHEN SNOWFLAKES OR
MUD GETS ON THE SENSORS
WHEN THE SENSOR IS
MALFUNCTIONING

277
2. INTUITIVE PARKING ASSIST
GS_Navi+MM_OM30F12U_(U)15.09.01 12:22
PERIPHERAL MONITORING SYSTEM
7
2. INTUITIVE PARKING ASSIST SETTING*
1Press the “MENU” button on the
Remote Touch.
2Select “Setup” .
3Select “Vehicle” .
4Select “LEXUS Park Assist”.
5Select the desired button.
1Display the “LEXUS Park Assist
Settings” screen. ( →P.277)
2Select “1” to “5”.
You can change the warning beep vol-
ume and Remote Touc h screen operat-
ing conditions.
*: If equipped
ALERT VOLUME SETTING
The alert volume can be adjusted.

278
2. INTUITIVE PARKING ASSIST
GS_Navi+MM_OM30F12U_(U)15.09.01 12:22
1Display the “LEXUS Park Assist
Settings” screen. (→P.277)
2Select “Display Off” .
1Display the “LEXUS Park Assist
Settings” screen. ( →P.277)
2Select “Front” or “Rear”.
zLong distance or short distance can be
selected.
DISPLAY ON/OFF SETTING
On or off can be selected for intuitive
parking assist-sensor display.
INFORMATION
●
When the “Display Off” indicator is
turned on, the display of intuitive parking
assist-sensor will be off. Select “Display
Off” again to turn the display of intuitive
parking assist-sensor on.
ALERT DISTANCE SETTING
Front or rear center sensors display and
tone indication can be set.
*
*: Except for GS F

282
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
GS_Navi+MM_OM30F12U_(U)15.09.01 12:22
XGS 450h/GS 350/GS 200t
X GS F
Volume control switch
z Press the “+” switch to increase the volume.
z Press the “-” switch to decrease the vol-
ume.
Off hook switch
On hook switch
REGISTERING/
CONNECTING A Bluetooth®
PHONE
To use the hands-free system for cellular
phones, it is necessary to register a cel-
lular phone with the system. ( →P.44)
Bluetooth® PHONE
CONDITION DISPLAY
The condition of the Bluetooth
® phone
appears on the upper right side of the
screen. ( →P.16)
USING THE PHONE SWITCH/
MICROPHONE
STEERING SWITCH
By pressing the phone switch, a call can
be received or ended without taking
your hands off the steering wheel.

285
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
GS_Navi+MM_OM30F12U_(U)15.09.01 12:22
PHONE
8
3. CALLING ON THE Bluetooth® PHONE
1Press the “MENU” button on the
Remote Touch.
2Select “Phone”.
3Select the desired tab to call from.
zThe phone top screen can be displayed by
pressing the
switch on the steering
wheel.
After a Bluetooth® phone has been reg-
istered, a call can be made using the
hands-free system. There are several
methods by which a call can be made, as
described below.
How to make a call listPage
By favorites list286
By call history286
By contacts list*1287
By dial pad*1289
By e-mail/SMS/MMS299
By POI call*287
By off hook switch290
By LEXUS App Suite338
By voice command system234
By quick dial*2352
*
1: The operation cannot be performed while driving.
*
2: With 12.3-inch display

286
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
GS_Navi+MM_OM30F12U_(U)15.09.01 12:22
1Display the phone top screen.
(→ P.285)
2Select the “Favorites” tab and select the
desired contact.
3Select the desired number.
4Check that the “Call” screen is dis-
played.
1Display the phone top screen.
( → P.285)
2Select the “Call History” tab and select
or the desired contact.
z The icons of call type are displayed.
: Missed call
: Incoming call
: Outgoing call
X When is selected
3Check that the “Call” screen is dis-
played.
X When the desired contact is selected
3Select the desired number.
4Check that the “Call” screen is dis-
played.
BY FAVORITES LIST
Calls can be made using registered con-
tacts which can be selected from a con-
tact list. ( →P.307)
BY CALL HISTORY
Up to 30 of the latest call history items
(missed, incoming and outgoing) can be
selected from the “Call History” tab.