4
Low Fuel Level Warning Light
ECOMINDER® Indicator*
Low Tire Pressure Light
Engine Coolant Temperature Warning Light
Anti-lock Braking System (ABS) Warning Light*
Parking Brake & Brake Fluid Warning Light
Door Ajar Warning Light
Electronic Brake Force Distribution (EBD) System Warning Light
Immobilizer Indicator*
Engine Oil Pressure Warning Light
Airbag Warning Light
Malfunction Indicator
Seat Belt Warning Light
Electric Power Steering (EPS) System Warning Light*
Charging System Warning Light
Auto Stop (ISG system) Indicator*
Tail Light Indicator
Front Fog Light Indicator
High Beam Indicator
Trunk /Hatch Open Warning Light*
Cruise Control Indicator*
Cruise SET Indicator*
Electronic Stability Control (ESC) Indicator*
Electronic Stability Control (ESC) OFF Indicator*
REMINDERS:
• Your vehicle’s instrument cluster & indicator light locations may differ from those in the illustrations
• For more information on the instrument cluster and the function of all indicator and warning lights, please refer to the Owner’s Manual
Indicators & Warning Lights
(Type B cluster)*
RIO FEATURES & FUNCTIONS GUIDE
*IF EQUIPPED
INSTRUMENT CLUSTER
9
The ISG system is disabled when: •A seat belt is unfastened •The hood or a door is opened •Battery condition is poor •The front or rear defroster is turned on •Engine coolant temperature is low
•The outside ambient temperature is too low/high •Emission control devices activate •The vehicle is on a steep slope
QUICK TIPS
Idle, Stop and Go System Video To view a video on your mobile device, snap this QR Code or visit the listed website .
Refer to page 2 for more information .
www.KuTechVideos.com/ub13/2016
QR CODE
B
(Buttons located on left side of Driver’s Panel)
(Type B Cluster)
A
Idle, Stop and Go (ISG) System*
The ISG system helps reduce fuel consumption by automatically shutting down
the engine when the vehicle is at a standstill .
When the ISG system is ON and the vehicle is at a standstill the engine will
stop, and the green AUTO STOP indicator on the instrument cluster A will
illuminate and the message Auto Stop will appear in the LCD screen* .
The engine will restart when the brake pedal is released or the shift lever is
moved from D (Drive) to the R (Reverse) position or to Sport mode . When engine
restarts, the green AUTO STOP indicator on the instrument cluster will turn off .
To deactivate the ISG System, press the ISG OFF button B . If you press again,
the system will be activated .
REMINDERS:
•ISG is active by default at vehicle start-up . When ignition is cycled, ISG will turn ON again
•Under certain conditions, the engine will restart automatically
• If the AUTO STOP indicator is illuminated yellow, please contact an authorized Kia dealer
For more information on Idle, Stop and Go System, refer to your Owner’s Manual or contact your local dealership.
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED
DRIVER'S PANEL
10
Hill-Start Assist Control (HAC)
HAC helps prevent the vehicle from rolling backwards when accelerating
from a stop while on a steep incline .
The HAC automatically activates whether the ESC is OFF or ON but does NOT
activate when the ESC has malfunctioned .
REMINDER: The HAC does not operate when the gear shift is in the P (Park) or the N (Neutral) position .
•
•When HAC is active (e .g ., during initial acceleration from a stop on an incline), you may notice that the brakes will momentarily remain engaged after you depress the accelerator – this is normal HAC operation •HAC provides a 2-second delay before the vehicle may start rolling backwards
QUICK TIPS
(Buttons located on left side of Driver’s Panel)
AB
Instrument Panel Dimmer
With parking lights / headlights ON, toggle switch A up or down to adjust
display brightness of the instrument panel illumination .
REMINDER: The Instrument Panel Dimmer does not adjust brightness on the UVO eServices with Navigation system screen . Use navigation setup to adjust brightness on the navigation system .
Electronic Stability Control (ESC)
The ESC system is designed to help stabilize the vehicle during cornering
maneuvers . It is a good idea to keep the ESC turned ON for daily driving
whenever possible .
Press ESC OFF button B to turn OFF .
REMINDERS:
•ESC is active by default at vehicle start-up . When ignition is cycled, ESC will turn ON again
• The ESC Indicator Light in the instrument cluster will be lit momentarily whenever the ESC is active
For more information on Electronic Stability Control (ESC) and its specific features and operations, please refer to your Owner’s Manual.
RIO FEATURES & FUNCTIONS GUIDE
*IF EQUIPPED
DRIVER'S PANEL
12
Engine Start/Stop Button*
To use the ENGINE START/STOP button, you
must have the Smart Key fob on your person or
inside the vehicle .
To start the engine:
1 . Depress the brake pedal
2 . Press the ENGINE START/STOP button while
gear shift is in P (Park) (or while in Neutral for
Manual Gear Shift)
To turn the engine OFF:
1 . Move gear shift into Park
2 . Press the ENGINE START/STOP button
REMINDERS:
• In an emergency situation while the vehicle is in motion, you are able to turn the engine off and to the ACC position by pressing the ENGINE START/STOP button for more than 2 seconds or 3 times successively within 3 seconds
• If the Smart Key battery is weak or not working properly, hold the Smart Key fob up to the ENGINE START/STOP button (Lock button side closest) and press to start engine
Engine Start/Stop Button and Smart Key Video To view a video on your mobile device, snap this QR Code or visit the listed website .
Refer to page 2 for more information .
www.KuTechVideos.com/ub13/2016
QR CODEAB
To use electrical accessories: ACC position A: •When in the OFF position and without depressing the brake pedal, press the ENGINE START/STOP button once
ON position B: •When already in the ACC position A and without depressing the brake pedal, press the ENGINE START/STOP button again •When in the OFF position and without depressing the brake pedal, press the ENGINE START/STOP button twice B
Keeping the vehicle in ACC or the ON position for extended periods of time without turning engine on may discharge the vehicle’s battery .
QUICK TIPS
RIO FEATURES & FUNCTIONS GUIDE
*IF EQUIPPED
DRIVER'S PANEL
18
Cruise Control* Audio Controls
CRUISE
For further audio system operations, refer to pages 19 – 22
Your vehicle’s steering wheel buttons may differ from those in the illustrations. See your Owner’s Manual for more details.
Driving while distracted is dangerous and should be avoided. Drivers should remain attentive to driving and always exercise caution when using the steering-wheel-mounted controls while driving.
Pressing the Audio MODE button for more than 1 second will turn Audio Mode ON/OFF
QUICK TIP
•Cruise Control is designed to function above approximately 25 mph •The cruise control system will not activate until the brake pedal has been depressed at least once after ignition ON or engine starting
QUICK TIPS
AB
DC
F
G
HE
( Type B)
A Volume button: Press up/down to raise/lower volume
B Seek/Preset button
• Radio Mode: Press to advance through Preset Stations . Press and hold
to Auto Seek
•Media Mode: Press to move Track up/down . Press & hold to FF/REW
C Audio MODE button: Press to cycle through FM/AM/SIRIUSXM®/CD/
MP3/USB/iPod®/Aux /Bluetooth® Audio* modes
D MUTE button: Press to mute all audio
E CRUISE Control On/Off button: Press to turn the Cruise Control
system On/Off
F Resume Cruising Speed button: Press up to resume or increase
Cruising Speed
G Set Cruising Speed button: Press down to set or decrease
Cruising Speed
H Cruise Control CANCEL button: To cancel Cruise Control, do one
of the following:
•Press the brake pedal
•Press the CANCEL button
RIO FEATURES & FUNCTIONS GUIDE
*IF EQUIPPED
STEERING WHEEL CONTROLS
25
Automatic Gear Shift with Sportmatic® Shifting*
•Press brake pedal and depress release button to move gear shift from N to P, N to R or from P to any gear •Sport mode downshifts are made automatically when the vehicle slows down . When the vehicle stops, 1st gear is automatically selected
QUICK TIPS
To view a video on your mobile device, snap this QR Code or visit the listed website .
Refer to page 2 for more information .
Sportmatic® Shifting Video
Paddle Shifters Video
www.KuTechVideos.com/ub13/2016
www.KuTechVideos.com/ub13/2016
QR CODES
P: Park
R: Reverse
N: Neutral
D: Drive
[+]: Sport Mode Upshift
[–]: Sport Mode Downshift
Sport Mode:
To enter Sport mode, move shift lever from D to left gate
To shift while in Sport mode, move shift lever up [+] to upshift or down [–] to downshift .
Paddle Shifters*
Paddle Shifters are operable when the shift lever is in the D
position or Sport mode .
Paddle Shifting: Pull the [+] or [-] paddle shifter once to shift up
or down one gear .
REMINDERS:
• When in Sport mode, pulling the left and right paddle shifters at the same time will NOT shift gears
• The Paddle Shifters can be operated when the vehicle speed is more than 6 mph
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED
CENTER PANEL
26
135R
6
4
2
N
When shifting into gears 1-6, the Shift Lever can be moved without pulling the Shift Lever button .
135R
6
4
2
N
QUICK TIP
AB
EDC
Manual Gear Shift*
Starting the Engine
1 . Apply Parking Brake A
2 . Depress Clutch fully B
3 . Shift into Neutral C
4 . Turn ignition to START
Shifting into Reverse
1 . Depress Clutch fully B
2 . Shift into Neutral C
3 . Press the Shift Lever button D
4 . Shift into Reverse E
RIO FEATURES & FUNCTIONS GUIDE
*IF EQUIPPED
CENTER PANEL
31
(Lever located on the driver’s floor near door sill)
B
C
D
(Lever located near floor below Driver’s Panel)
(Latch located inside hood)
A
Hood Release Lever and Latch
Opening the Hood:
1 . Pull the Hood Release Lever A to unlatch
the Hood
2 . In the front of the vehicle, lift the Hood
slightly, push the secondary Latch B to
the left inside of the hood’s center and lift
the hood
3 . Pull out the support rod from the Hood and
set into place to hold the Hood open
Fuel Door Release Lever
Lift the lever C upwards to release
the fuel door .
Trunk Release Lever
(4-door model)
Lift the lever D upwards to unlock
the trunk lid .
Sunvisor
Use the Sunvisor to shield direct light through the front or side
windows . Slide the Sunvisor out and adjust as needed .
REMINDERS:
•Sunvisor may not shield all direct light
• The Sunvisor may impair visibility if not adjusted properly . Do not operate the vehicle if Sunvisor is impairing your visibility
• Be aware of seating position when adjusting or swinging Sunvisor around to or from the front or side windows .
REMINDER: Open the Hood only after turning the engine off, on a flat surface, with the gear shift in P (Park) position and setting the parking brake .
Closing the Hood:
Lower the Hood about halfway and then press down to securely lock
in place .
REMINDER: While lowering and closing, keep hands away from under the Hood .
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED
OTHER KEY FEATURES