7
  Fuel Economy Video   To view a video on your mobile device, snap this QR Code or visit the listed website .
Refer to page 2 for more information  .
www.KuTechVideos.com/jf13/2016 
QR CODE
There are several factors that contribute 
to your vehicle’s fuel economy, including 
maintenance of your vehicle, driving style, 
environmental conditions, vehicle weight and 
vehicle aerodynamics  . Below are tips on how 
to help improve fuel economy:
 •Keep your vehicle in good condition with 
regular maintenance
 •Don’t let the engine idle longer than 
necessary
 •Drive at a moderate speed, accelerating 
smoothly and at a moderate rate
 •Keep tires inflated to the recommended 
pressure 
 •Travel lightly, without carrying 
unnecessary weight in your vehicle 
 •Avoid placing large or heavy items on roof racks 
 •Avoid hilly, winding or poorly maintained roads
REMINDER: Driving range can vary depending on your vehicle’s fuel tank size, e  .g ., 12-gal  . vs . 24-gal  ., even though the MPG may be the same
Fuel Economy
For more information on Fuel Economy, you can snap the QR Code above to view a video or refer to the brochure “GETTING MORE OUT OF EVERY GALLON, FUEL-SAVING TIPS TO DRIVE BY” available at your local dealership.
Instant Fuel Consumption Mode*
When in the Fuel Economy screen in the Trip Computer, press the Mode 
button A to cycle to the Instant Fuel Consumption Mode and press 
Select /Reset button B to select  . This screen displays the calculated fuel 
consumption during the past few seconds when the vehicle speed is more 
than approximately 6 MPH  .
1 . Keep your vehicle in good condition with regular maintenance
2  . Travel lightly, without carrying unnecessary weight in your vehicle
3  . Don’t let the engine idle longer than necessary
REMINDERS: 
 •Not to be used in calculating or as a reference for AVER AGE fuel economy
 •  If the vehicle speed exceeds 1 MPH (1  .6 km/h) after being refueled with more than 1  .6 gallons (6 liters), the average fuel economy will be cleared to zero (----)
(Buttons located on Steering Wheel)
A
B
Your vehicle’s steering wheel buttons may differ from those in the illustrations. 
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS . *IF EQUIPPED  
INSTRUMENT CLUSTER  
         
        
        8
To enter the User Settings mode in 
the LCD Instrument Cluster Modes, 
press the Mode button A when the 
vehicle is at a standstill and with the 
ignition switch or the ENGINE START/ 
STOP button* in the ON position and 
select User Settings  .
You can navigate the selections on the display by pressing the 
Move/Scroll button B up and down, and then selecting the item by 
pressing the Select /Reset button C .
Driving Assist*:
 •Smart Cruise Control 
Response*
 •Rear Cross Traffic Alert 
( RC TA )*
 •AEB (Autonomous 
Emergency Braking)*
Door/Trunk:
 •Automatic Lock & Unlock
 •Door Lock Sound*
 •Smart Trunk*
Lights:
 •One-Touch Turn Signal* 
 •Headlamp Delay
 •Welcome Light*
User Settings
Sound: 
 •Park Assist System Volume*
 •Blind Spot Detection Sound*
 •Welcome Sound*
Service Interval:
 •Service Interval On/Off
 •Set mileage/months
Steering:
 •Steering Position
Other Features:
 •Fuel Economy Auto Reset
 •Wiper/Light Display*
 •Fuel Economy Unit
 •Temperature Unit
 •Tire Pressure Unit*
 •Language
To enter Service mode, press the Mode button  A, scroll using B (Move/Scroll) to Service Mode 
 and press Select /Reset button C . System will 
display number of miles remaining until next service 
is due, as well as type of service .
When service is required, the 
following will be displayed: 
Service Required .
To reset the Service mode 
system, press and hold the 
Select /Reset button C for 
more than 1 second .
To turn Service In OFF, go to 
User Settings . 
Service Interval Setting
To set the service interval 
when in User Settings mode:
 •Press the Move button B 
and scroll to Service Interval  . Press the Select /
Reset button C to enter
 •Press the Move button B and toggle to ON, then 
press the Select /Reset button C . Then press the 
Move button B to scroll and select the desired 
miles or months for your next service
 •Press the Select /Reset button C to enter
Service Mode  To view a video on your mobile device, snap these QR Codes or visit the listed website .
Refer to page 2 for more information  .
LCD Display: Maintenance Video
LCD Display Video 
www.KuTechVideos.com/jf13/2016 
www.KuTechVideos.com/jf13/2016 
(Type B cluster)
(Located on Steering Wheel)
A
BC
Service in
Off
Service Required
0000mi.
0000mi.
QR CODES
OPTIMA  FEATURES & FUNCTIONS GUIDE 
*IF EQUIPPED  
INSTRUMENT CLUSTER