2016 KIA K900 ignition

INSTRUMENT CLUSTER
*IF EQUIPPED 4
Fuel Economy
Several factors contribute to your vehicle’s fuel economy,
including maintenance of your vehicle, driving style,
environmental conditions, vehicle weight and vehicle
aerodynamics. Below are tips on how to help improve
fuel economy:
§ Keep your vehicle in good condition with regular maintenance
§ Don’t let the engine idle longer than necessary
§ Drive at a moderate speed, accelerating smoothly
§ Keep tires inated to the recommended pressure
§ Tr avel lightly, without carrying unnecessary weight in
your vehicle
§ Avoid placing large or heavy items on roof racks
§ Avoid hilly, winding or poorly maintained roads
REMINDER: Driving range varies depending on a
vehicle’s fuel tank size, e.g., 12- gal. vs. 24-gal.. Even
though two vehicles’ MPG may be the same, the
vehicle with the larger tank will have greater range.
www.KuTechVideos.com/kh13/2016
FUEL ECONOMY
VIDEO
To view a video on
your mobile device,
snap this QR Code or
visit the listed website.
Refer to page 2 for
more information.
Active ECO System
When activated, the Active ECO system optimizes drivetrain
operations such as engine power and transmission to help
improve fuel economy.
To turn ON, press the DRIVE MODE button
A, scroll through
the modes then select ECO.
A green ECO indicator will illuminate on the instrument cluster
(indicating that you are getting optimal fuel economy).
www.KuTechVideos.com/kh13/2016
ECO MODE VIDEO
To view a video on
your mobile device,
snap this QR Code or
visit the listed website.
Refer to page 2 for
more information.
A
(Button located on center panel below the gear shift)
REMINDER: When the Active ECO system is turned ON and ignition is cycled,
the system remains ON.
29319_Text.indd 411/6/15 10:20 AM

DRIVER’S PA NEL
*IF EQUIPPED 8
Electronic Stability Control (ESC) is designed to help stabilize the vehicle during cornering maneuvers.
Tr a c t i o n Control System (TCS) helps improve traction while accelerating on slippery surfaces. It is a good
idea to keep both ESC and TCS turned on for daily driving whenever possible.
Press the ESC button
B to turn Electronic Stability Control and Tr a c t i o n Control System OFF/ON.
To turn Electronic Stability Control and Tr a c t i o n Control System O F F, press and hold the ESC button for more
than 3 seconds. Press again to turn ON.
Electronic Stability Control (ESC) / Traction Control Sy\ftem (TCS)
REMINDERS:
- ESC is active by default at vehicle start-up. When ignition is cycled, ESC will turn ON again
- The ESC indicator light in the instrument cluster will be lit momentarily whenever ESC is active
For more information on Electronic Stability Control (ESC) and its specic features and operations, please refer to your Owner’s Manual.
Hill-\ftart \b\f\fi\ft Control (H\bC)
Hill-start Assist Control (HAC) helps prevent the vehicle from
rolling backwards when accelerating from a stop while on a
steep incline.
HAC automatically activates whether ESC is OFF or ON but
does NOT activate when ESC has malfunctioned.Quick Tip

When HAC is active (e.g., during initial acceleration
from a stop on an incline), you may notice that the
brakes will momentarily remain engaged after you
depress the accelerator.
REMINDER: HAC does not operate when the gear shift is in P (Park) or N (Neutral) position.
With parking lights/headlights ON, press A (+) or (-) to adjust the brightness of the instrument
panel illumination.
In\ftrument Panel Dimmer
REMINDER: The Instrument Panel Dimmer does not adjust brightness on the navigation system screen.
Use navigation setup to adjust brightness on the navigation system.
A
B
(Buttons located on driver’s panel, left of the steering wheel)
29319_Text.indd 811/6/15 10:20 AM

DRIVER’S PA NEL
9*IF EQUIPPED
A LWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS.
www.KuTechVideos.com/kh13/2016
BLIND SPOT
DETECTION SYSTEM
VIDEO
To view a video on
your mobile device,
snap this QR Code or
visit the listed website.
Refer to page 2 for
more information.
Blind Spot Detection (BSD) System*
The Blind Spot Detection (BSD) system uses radar sensors to
monitor surrounding areas and help alert the driver to nearby
vehicles before changing lanes. With the ENGINE STA R T/
STOP button in the ON position, press the BSD button
B to
turn the system ON. The button light will illuminate.
The system will activate when the vehicle is traveling more
than 20 mph and will alert the driver if another vehicle is
detected by the radar s en s o r.
1st-stage alert: When another vehicle is detected within the
BSD system boundar y, a yellow indicator will illuminate
A on
the outside rearview mirrors.
2nd-stage alert: When 1s t stage alert is on and the
driver activates a turn signal, a ashing red indicator will
illuminate
A on the outside rearview mirrors and the
system will sound an alert.
\fear Cross \br a f f i c Alert ( \f C \bA )
If the Rear Cross Tr a f c Alert ( RC TA ) system sensors detect
vehicles approaching from the left or right side, the system
will sound an audible alert, the warning indicators on the
outside rearview mirror will illuminate and a message will
appear on the LCD screen, under these conditions:
§ When the vehicle is in Reverse
§ When the vehicle moves backwards from a parked position
§ When the vehicle is moving less than 6 mph
REMINDER: The RC TA feature can be turned
OFF/ON by pressing the BSD button B.
A
B
Quick \bip
The BSD system will activate when:
1. The system is turned on
2. Vehicle speed is above approximately 20 mph
3. Other vehicles are detected on the rear sides of
the vehicle
REMINDERS:
- The BSD system will not issue a warning if the vehicle
speed is 6 mph or more above the surrounding vehicles
- When the BSD is ON and the ignition is cycled, the BSD
system returns to ON
(Buttons located on driver’s panel,
left of the steering wheel)
29319_Text.indd 911/6/15 10:20 AM

DRIVER’S PA NEL
*IF EQUIPPED 10
Lane Departure Warning System (LDWS)\f
www.KuTechVideos.com/kh13/2016
LANE DEPARTURE
WARNING SYSTEM
VIDEO
To view a video on
your mobile device,
snap this QR Code or
visit the listed website.
Refer to page 2 for
more information.
A
REMINDERS:
- The LDWS will not issue a warning if the turn
signal is activated
- When the ignition is cycled, LDWS will return to
ON when button is pressed
Power \br u n k Main Control Lever
The Power Tr unk Main Control lever is located to the left of the
steering wheel, below the main button panel.
To open, pull the Power Tr unk Main Control lever
C.
To close, press and hold the Power Tr unk Main Control lever
C.
Fuel Door Release Button
Press the Fuel Door Release button B to open the fuel door.
CB
(Buttons located under driver’s
panel, left of the steering wheel)
The Lane Departure Warning System (LDWS) monitors the
vehicle’s position on the road and issues a warning if the
vehicle is drifting out of the intended lane.
With the ENGINE START/STOP button in the ON position,
press the LDWS button
A to turn the system ON. The
instrument cluster indicator
will illuminate green.
If the LDWS detects that you are driving outside of your lane,
the system may issue a warning on the LCD screen and an
alert may sound, under these conditions:
§ The vehicle speed exceeds approximately 43 mph
§ The LDWS system recognizes the lane the vehicle is
traveling in
For more on how to operate the Power Trunk , see the Power Trunk Operation section,
or refer to the Owner's Manual.
(Button located on left side of the steering wheel)
The Lane Departure Warning System (LDWS) is not a substitute for safe and proper driving. Always drive safely and use caution. LDWS
may not always alert the driver if the vehicle is driven outside of its lane. Refer to the Owner’s Manual for more information.
29319_Text.indd 1011/6/15 10:20 AM

STEERING WHEEL CONTROLS
15*IF EQUIPPED
A LWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS.
Power Tilt/Telescoping Steering Wheel
To adjust the steering wheel distance, move the switch A forward or backward.
To adjust the steering wheel angle, move the switch
A up or down.
A
B
(Switch located on left side of steering wheel)
\fuick Tips
- If ignition is turned OFF then ON again within 30
minutes of the steering wheel heater being turned
ON, the system will remain in the ON position
- System does NOT turn off when ignition is
cycled. To turn system of f, press the heated
steering wheel buttonWhile the ENGINE START/STOP button is in the ON position,
press B to turn steering wheel heater ON. The button
indicator will illuminate.
The steering wheel heater will turn off automatically in 30
minutes, or when button is pressed again to deactivate.
He\bted Steering Wheel*
(Button located on left side of steering wheel)
29319_Text.indd 1511/6/15 10:22 AM

STEERING WHEEL CONTROLS
*IF EQUIPPED 18
The Advanced Smart Cruise Control (ASCC)* system allows
you to set the vehicle to maintain a speed so long as it is not
limited by trafc. When trafc is encountered, the vehicle will
be slowed to maintain a set distance behind trafc without
depressing the accelerator or brake pedal.
To set /adjust the ASCC speed:
§ Press the CRUISE button up
A to turn system ON. The
CRUISE indicator will illuminate on the instrument cluster
§ Accelerate/decelerate to the desired speed
§ Press the RES+ / S E T- button up/down
B to set or
adjust speed
To set the vehicle-to-vehicle distance:
§ Press the ASCC button
C on the steering wheel.
§ Each time you press
C the vehicle-to-vehicle distance
will change, indicated by the number of bars that appear
on the display
D
To turn the ASCC system OFF:
§ Press the CANCEL button
E. The CRUISE indicator on the
instrument cluster will turn off and the LCD screen ASCC
image will show cancelled
Advanced Smart Cruise Control (ASCC\f*
Quick \bips
The speed setting for the ASCC can be adjusted
under the following conditions:
- With no vehicle in front, you must be travelling at
a minimum speed of 20 mph
- When following a vehicle, there is no minimum
speed requirement
When following a vehicle, the system will
automatically adjust your cruise speed based on
the vehicle in front. It will even bring the vehicle to
a complete stop if necessary. If the vehicle remains
at a standstill for more than 3 seconds, the system
will disable.
To change the cruise control mode from ASCC to
standard cruise control, press and hold button
C.
Repeat to switch back to ASCC mode. (The ASCC
system must not be activated to change modes).
www.KuTechVideos.com/kh13/2016
ADVANCED SMART
CRUISE CONTROL
(ASCC) VIDEO
To view a video on
your mobile device,
snap this QR Code or
visit the listed website.
Refer to page 2 for
more information.
REMINDERS:
-
CRUISE indicator must be ON in order to
operate ASCC
- The cruise control system will not activate until
the brake pedal has been depressed at least once
after ignition ON or engine starting
C
BA
E65mphCRUISE
(Display on
instrument cluster)
(Buttons located on right side of the steering wheel)D
29319_Text.indd 1811/6/15 10:22 AM

CENTER PA NEL
27*IF EQUIPPED
A LWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS.
Automatic Climate Control System (continued\f
REMINDER: Your automatic climate control system
may differ from the image. See your Owner’s
Manual for more details.
Quick Ti\bs
- Keep inside glass as clean as possible to help
reduce window fogging
- Defrost Mode activates A /C and opens the fresh
air vent to help dehumidify the air and improve
defroster performance
Rear Climate Control
A Fan Speed Control knob
B Rear Climate Control OFF button
C Rear Climate Control LCD screen
D Rear Te m p e r a t u r e Control knob
E AUTO (Automatic) Climate Control button
F Climate Control REAR LOCK button
Tu r n the rear temperature control knob
D to set the rear
passenger’s zone temperature.
The rear seat, rear audio and rear climate controls can be
activated or deactivated by using the REAR LOCK button
F.
The REAR LOCK button light
F will be illuminated when the
rear seat controls are locked.
REAR LOCK settings can also be changed in the UVO
eServices with Premium Navigation system.
To set from the navigation system:
§ Press the CLIMATE button
§ Deselect the Rear Climate option
REAR LOCK settings return to the default setting when
ignition is cycled.
AB
CDE
F
www.KuTechVideos.com/kh13/2016
TRI-ZONE
AUTOMATIC CLIM ATE
CONTROL VIDEO
To view a video on
your mobile device,
snap this QR Code or
visit the listed website.
Refer to page 2 for
more information.
REMINDER: If the rear climate controls have been deactivated through
navigation system, they must be activated the same way.
29319_Text.indd 2711/6/15 10:22 AM

CENTER PANEL
29*IF EQUIPPED
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLE TE OPER ATING INFORMATION AND SAFE T Y WARNINGS.
The Electric Parking Brake (EPB) system utilizes an electric
motor to engage the parking brake.
Applying the Parking Brake
Depress the brake pedal and pull up the EPB switch
C.
Ensure that the indicator light
is illuminated on the
instrument cluster.
Releasing the Parking Brake
The EPB will automatically release when the shifter is placed
in Reverse or Drive. To release EPB manually, depress the
brake pedal, then press the EPB switch
C, with the ignition
switch in the ON position. Ensure that the indicator light

i s O F F.
Ele\ftri\f Parking Brake (EPB)
Aut\b H\bld
Qui\fk Tip
Pull up and hold EPB switch again to increase brake
pressure if parked on a decline or incline.
www.KuTechVideos.com/kh13/2016
ELECTRIC PARKING
BRAKE (EPB) / AUTO
HOLD VIDEO
To view a video on
your mobile device,
snap this QR Code or
visit the listed website.
Refer to page 2 for
more information.
REMINDERS: - As a bulb check, the EPB malfunction indicator will illuminate for approximately 3 seconds when the ignition switch is turned ON
- If the warning light does not illuminate temporarily or remains continuously lit, take your vehicle to an authorized Kia dealer and have the system checked
- The EPB should not be operated while the vehicle is moving
- A click or electric brake motor sound may be heard while operating or releasing the EPB. These conditions are normal and indicate that the EPB is functioning properly
Auto Hold temporarily maintains the vehicle at a standstill even if the brake pedal is released. Auto
Hold can be turned On/Off using the AUTO HOLD switch D on the center panel. Before Auto Hold
will operate, the driver’s door, engine hood and trunk must be closed and the driver’s seat belt must
be fastened.
The Auto Hold indicator, which is in the instrument cluster, has four states:
White : Standby – With vehicle at a standstill, and AUTO HOLD switch
D turned ON, the indicator
will illuminate white. While driving the vehicle (vehicle is not at a standstill), the Auto Hold indicator
will remain white.
Green : Engaged – When coming to a complete stop by depressing the brake pedal, the Auto Hold
indicator changes from white to green.
OFF (not illuminated) – The indicator will turn OFF when the AUTO HOLD switch
D is manually
turned OFF or when the EPB is manually turned ON.
Yellow : Malfunction – When the indicator is illuminated yellow, there may be a system malfunction.
Take your vehicle to a local Kia dealer.
29319_Text.indd 2911/6/15 10:23 AM