2016 KIA K900 warning

CENTER PA NEL
*IF EQUIPPED 24
A When lit, indicates a disc is inserted
B Press to eject disc
C Insert disc
D Press to turn the display OFF/ON
E Press and hold to reset/restart the system
F Press to power ON. Press quickly to turn A/V O F F. Press
and hold to turn system O F F. Rotate to adjust volume
G Press to select FM /A M modes
H Press to select SiriusXM®* mode
I Press to select MEDIA (Disc, Jukebox, USB/iPod®, Aux,
Pandora®, Bluetooth® Audio) modes
J Press to display a map of the current location or repeat
voice guidance
K Press to select previous/next radio/SiriusXM® stations/
Disc/MP3/Jukebox/USB/iPod® tracks/les/chapters. Press
and hold to automatically search radio stations. Press and
hold to quickly move through media tracks/les/chapters
L Rotate to change Radio/SiriusXM® stations/Disc/Jukebox/
USB/iPod® les. Press to select
Quick Tips
- Use the touchscreen and/or the DIS to navigate
through the menus/selections
- Prolonged use of the navigation system in ACC
mode may drain the vehicle’s battery. A warning
screen may appear periodically to remind users
that the navigation system should be operated with
the engine running to prevent battery discharge
- When using the voice command feature, wait for
the system BEEP before speaking the command
- Surround Sound can be turned on or off
REMINDER: Your vehicle’s audio system may differ
from that in the image.
UVO Luxury Services with Premium Navigation
ABCDE
K
LF
GHIJ
www.kutechvideos.com/audio/
k900_avn
UVO LUXURY
SERVICES WITH
PREMIUM N AVIG ATION
SYSTEM VIDEO
To view a video on
your mobile device,
snap this QR Code or
visit the listed website.
Refer to page 2 for
more information.
For further system operation, refer to the Car
Navigation System Owner’s Manual.
29319_Text_r1.indd 2411/12/15 10:33 AM

CENTER PA NEL
25*IF EQUIPPED
A LWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS.
Clock
Aux/USB/iPod
® Port \f Power Outlet\b
Center Panel Clock Setup:
Clock setup is completed through the navigation system
screen. See below or refer to the Car Navigation System
Owner’s Manual for more information.
UVO Luxury Service\b with Premium Navigation
Sy\btem Clock Setup:
Select SETTINGS on the navigation screen. Select CLOCK.
Select TIME SETTINGS and set the time, then select OK.
If equipped, additional power outlets are located inside the
center console and in the rear passenger’s center console.
For further system operation, refer to the Car Navigation System Owner’s Manual.
(The outlets shown are
located in the center panel)
UVO Luxury Service\b Regi\btration/Activation – To u\be UVO Luxury Service\b follow
the\be activation \btep\b:
1. Press the UVO button on DIS controls
(Located on Center Console)
2. Select UVO Settings on the navigation screen
3. Choose Service Activation and select Activation
4. Review and Agree to the UVO Te r m s and Conditions 5.
Complete the form elds for Account Registration
(email and password) and press Submit
6. Complete the activation by downloading the UVO
Luxury Services app for your iPhone
®
or Android™
UVO Luxury Service\b with Premium Navigation* (Continued)
Sound Setting\b
To adjust the sound settings, press the HOME icon using the touch screen or the HOME button on the center
panel, select SETTINGS, then select SOUND. From the SOUND menu, you can adjust the following settings:
§ Volume Ratio
§ Fade/Balance
§ Treble/Middle/Bass
§ Surround Sound §
Variable EQ
§ Speed Dependent Vol.
§ Touch To n e
29319_Text.indd 2511/6/15 10:22 AM

CENTER PA NEL
27*IF EQUIPPED
A LWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS.
Automatic Climate Control System (continued\f
REMINDER: Your automatic climate control system
may differ from the image. See your Owner’s
Manual for more details.
Quick Ti\bs
- Keep inside glass as clean as possible to help
reduce window fogging
- Defrost Mode activates A /C and opens the fresh
air vent to help dehumidify the air and improve
defroster performance
Rear Climate Control
A Fan Speed Control knob
B Rear Climate Control OFF button
C Rear Climate Control LCD screen
D Rear Te m p e r a t u r e Control knob
E AUTO (Automatic) Climate Control button
F Climate Control REAR LOCK button
Tu r n the rear temperature control knob
D to set the rear
passenger’s zone temperature.
The rear seat, rear audio and rear climate controls can be
activated or deactivated by using the REAR LOCK button
F.
The REAR LOCK button light
F will be illuminated when the
rear seat controls are locked.
REAR LOCK settings can also be changed in the UVO
eServices with Premium Navigation system.
To set from the navigation system:
§ Press the CLIMATE button
§ Deselect the Rear Climate option
REAR LOCK settings return to the default setting when
ignition is cycled.
AB
CDE
F
www.KuTechVideos.com/kh13/2016
TRI-ZONE
AUTOMATIC CLIM ATE
CONTROL VIDEO
To view a video on
your mobile device,
snap this QR Code or
visit the listed website.
Refer to page 2 for
more information.
REMINDER: If the rear climate controls have been deactivated through
navigation system, they must be activated the same way.
29319_Text.indd 2711/6/15 10:22 AM

CENTER PANEL
29*IF EQUIPPED
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLE TE OPER ATING INFORMATION AND SAFE T Y WARNINGS.
The Electric Parking Brake (EPB) system utilizes an electric
motor to engage the parking brake.
Applying the Parking Brake
Depress the brake pedal and pull up the EPB switch
C.
Ensure that the indicator light
is illuminated on the
instrument cluster.
Releasing the Parking Brake
The EPB will automatically release when the shifter is placed
in Reverse or Drive. To release EPB manually, depress the
brake pedal, then press the EPB switch
C, with the ignition
switch in the ON position. Ensure that the indicator light

i s O F F.
Ele\ftri\f Parking Brake (EPB)
Aut\b H\bld
Qui\fk Tip
Pull up and hold EPB switch again to increase brake
pressure if parked on a decline or incline.
www.KuTechVideos.com/kh13/2016
ELECTRIC PARKING
BRAKE (EPB) / AUTO
HOLD VIDEO
To view a video on
your mobile device,
snap this QR Code or
visit the listed website.
Refer to page 2 for
more information.
REMINDERS: - As a bulb check, the EPB malfunction indicator will illuminate for approximately 3 seconds when the ignition switch is turned ON
- If the warning light does not illuminate temporarily or remains continuously lit, take your vehicle to an authorized Kia dealer and have the system checked
- The EPB should not be operated while the vehicle is moving
- A click or electric brake motor sound may be heard while operating or releasing the EPB. These conditions are normal and indicate that the EPB is functioning properly
Auto Hold temporarily maintains the vehicle at a standstill even if the brake pedal is released. Auto
Hold can be turned On/Off using the AUTO HOLD switch D on the center panel. Before Auto Hold
will operate, the driver’s door, engine hood and trunk must be closed and the driver’s seat belt must
be fastened.
The Auto Hold indicator, which is in the instrument cluster, has four states:
White : Standby – With vehicle at a standstill, and AUTO HOLD switch
D turned ON, the indicator
will illuminate white. While driving the vehicle (vehicle is not at a standstill), the Auto Hold indicator
will remain white.
Green : Engaged – When coming to a complete stop by depressing the brake pedal, the Auto Hold
indicator changes from white to green.
OFF (not illuminated) – The indicator will turn OFF when the AUTO HOLD switch
D is manually
turned OFF or when the EPB is manually turned ON.
Yellow : Malfunction – When the indicator is illuminated yellow, there may be a system malfunction.
Take your vehicle to a local Kia dealer.
29319_Text.indd 2911/6/15 10:23 AM

CENTER PA NEL
31*IF EQUIPPED
A LWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS.
(Button located on center panel below the gear shift)
www.KuTechVideos.com/kh13/2016
SURROUND VIEW
MONITORING (SVM)
SYSTEM VIDEO
To view a video on your
mobile device, snap this
QR Code or visit the listed
website. Refer to page 2
for more information.
REMINDER: The SVM camera is equipped with
an optical lens to provide a wider range of vision
and may appear different from the actual distance.
Also, the Surround View Monitoring system is only a
supplemental device. Drivers should not rely solely
on the SVM information when parking and backing
up. Drivers should always pay attention and directly
check the left/right and r ea r.
Surround View Monitoring (SVM) System\f
The Surround View Monitoring (SVM) System is a parking
support system that shows the areas around the front, rear, left
and right sides of the vehicle via four cameras displayed onto
the navigation screen.
Press
A to turn the SVM system ON/OFF.
§ When OFF: The camera view will automatically display
on the navigation screen when the vehicle is shifted into
Reverse. The camera view will turn off when the vehicle is
shifted out of Reverse
§ When ON: The camera view will display on the navigation
screen in both Drive and Reverse. In Drive, the camera
view will continue to display until the vehicle is traveling
at speeds above approximately 13 mph. If you keep the
SVM system on, the camera view will reappear on the
navigation screen whenever the vehicle speed drops below
approximately 13 mph
When in Drive & Neutral: When in Reverse:
A
Displays the front side and SVM images
simultaneously on the screen
Displays the front side image on the screen
Displays the front side and left side images
simultaneously on the screen
Displays the front side and right side images
simultaneously on the screen
Displays the rear view and AVM images
simultaneously on the screen
Displays the rear side image on the screen
Displays the rear and left side images
simultaneously on the screen
Displays the rear and right side images
simultaneously on the screen
Camera View Modes – To change camera view modes, use the touch screen or rotate the controller and
push to select the mode.
29319_Text.indd 3111/6/15 10:23 AM

CENTER PA NEL
33*IF EQUIPPED
A LWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS.
(Button located on center panel below the gear shift)
While the ENGINE START/STOP button is in the ACC/ON position,
press the power rear curtain button A to raise/lower curtain.
REMINDER: Raising or lowering the rear curtain by hand may cause motor failure.
Power Rear Curtain
www.KuTechVideos.com/kh13/2016
POWER REAR
CURTA IN & REAR
SIDE-WINDOW
CURTA INS VIDEO
To view a video on
your mobile device,
snap this QR Code or
visit the listed website.
Refer to page 2 for
more information.
Quick Tips
- The power rear curtain will lower automatically
when the gear shift is moved into the R (Reverse)
position and raise automatically when the gear
shift is moved from R (Reverse) into P (Park)
- When the gear shift is moved into D (Drive)
and the vehicle is traveling at speeds greater
than 12 mph, the power rear curtain will unfold
automatically
A
(Button located on rear passenger’s control system)
A
29319_Text.indd 3311/6/15 10:24 AM

S E AT I N G
35*IF EQUIPPED
A LWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS.
Move/press controls to adjust headrest, seat forward/backward position, seat cushion length, seatback
angle or lumbar support.
Headrest Height Adjustment*: Move button
A up/down to adjust headrest height
Seatback Angle Adjustment: Move button
B forward/backward to adjust seatback angle
Seat Sliding, Seat Height and Cushion Length* Adjustments:
§ Move button
C forward/backward to slide seat
§ Move front part of button
D up/down to raise/lower front part of seat
§ Move back part of button
E up/down to raise/lower back part of seat
§ Move button
F forward/backward to increase/decrease cushion length*
Lumbar Support Adjustment:
§ Press
G to increase support
§ Press
H to decrease support
§ Press
I to move lumbar support up/down
Power Adjustable Driver’s \feat
A
B
ED
F
C
GH
I
I
(Buttons located on left side of seat cushion)
(Controls located on door panel)
Power Height Adjustment* – To adjust the height, move
the seat control button A up/down.
Manual Tilt Adjustment – To adjust the headrest forward/
backward, tilt the lower part of the headrest at a slight angle.
Power Front \feat Headrest Adjust\bent*
29319_Text.indd 3511/6/15 10:24 AM

S E AT I N G
37*IF EQUIPPED
A LWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS.
Rear Passenger’s Control System
The rear passenger’s control system lets users adjust the rear
and front seat controls, rear audio control and climate control.
Rear Seat Ad\fustment
To activate or deactivate the system, press the REAR LOCK
button
A on the rear armrest console.
To control the rear seat lumbar suppor t *, press the L (left
seat)
B or R (right seat) C button.
To adjust the lumbar support, move the lever
D:
§ To the LEFT to increase
§ To the RIGHT to decrease
§ UP to move the support position higher
§ DOWN to move lower
Qui\bk Tip

Users can also activate/deactivate the rear
passenger control system through the navigation
system. Press the CLIMATE button on the center
panel and deselect the Rear Climate option. If
the rear climate controls have been deactivated
through navigation system, they must be activated
the same way.
DF
E
G
C
B
A
Front Passenger Seat Ad\fustment
To adjust the angle of the front passenger’s seat from the
rear seat control system or the buttons on front seatback,
press the top/bottom of button
F to angle the front
seatback forward/backward.
To adjust the position of front passenger’s seat from
the rear seat control system or the buttons on the front
seatback, press the top/bottom of button
G to move the
seat forward/backward.
REMINDER: The front passenger seat adjustments F G only operate when seat is not occupied.
Easy Access (AUTO) – When opening the rear door, the rear seats will automatically move rearward to
provide easier access for passengers.
Press the AUTO button
E on the door panel to turn the system ON (LED is lit) or OFF (LED not lit).
(Buttons located on left side of
front passenger seatback)
F
G
29319_Text.indd 3711/6/15 10:25 AM