2016 KIA K900 buttons

STEERING WHEEL CONTROLS
17*IF EQUIPPED
A LWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS.
A
Windshield Wipers & Washers
To operate:
§ Move lever up/down to change wiper modes
M I S T: Single wipe
OFF: Wiper off
AUTO: Auto Rain Sensing LO:
Slow wipe
HI: Fast wipe
§ Pull to spray and wipe
Quick Tips
- When the ENGINE START/STOP button is in the
ON position and the wiper switch is in AUTO
mode, the wiper will automatically operate once
to perform a self-check of the system
- Set the wiper to the OFF position when the wiper
is not in use
- If going through a car wash, remind the
attendant to keep the vehicle in Neutral (N)
and keep the engine running. Also, disable the
Power Trunk lid control using the button inside
the glove compartment, turn off the auto rain-
sensing wipers and fold in the mirrors
Au\fo Rain Sensin\b
The rain sensor located on the upper end of the windshield
glass senses the amount of rainfall and controls the wiping
cycle for the proper interval. The more it rains, the faster the
wiper operates. When the rain stops, the wiper stops.
To turn ON the auto rain-sensing wipers, move lever up/down
to AUTO.
To adjust the auto rain-sensing wiper speed setting, move
the speed control switch
A up/down.
www.KuTechVideos.com/kh13/2016
AUTO RAIN-SENSING
WINDSHIELD WIPERS
VIDEO
To view a video on your
mobile device, snap this
QR Code or visit the listed
website. Refer to page 2
for more information.
LCD Con\frols and Modes
The LCD modes B on the instrument cluster can be
changed using the control buttons C on the right side of
the steering wheel.
Press Mode buttons
/ to change LCD mode.
Press Move buttons
/ to select item.
Press Select/Reset button
in center to set/reset the item.
C
B
For more detailed information, see the LC D Instrument Cluster Modes section on page 6.
29319_Text.indd 1711/6/15 10:22 AM

STEERING WHEEL CONTROLS
*IF EQUIPPED 18
The Advanced Smart Cruise Control (ASCC)* system allows
you to set the vehicle to maintain a speed so long as it is not
limited by trafc. When trafc is encountered, the vehicle will
be slowed to maintain a set distance behind trafc without
depressing the accelerator or brake pedal.
To set /adjust the ASCC speed:
§ Press the CRUISE button up
A to turn system ON. The
CRUISE indicator will illuminate on the instrument cluster
§ Accelerate/decelerate to the desired speed
§ Press the RES+ / S E T- button up/down
B to set or
adjust speed
To set the vehicle-to-vehicle distance:
§ Press the ASCC button
C on the steering wheel.
§ Each time you press
C the vehicle-to-vehicle distance
will change, indicated by the number of bars that appear
on the display
D
To turn the ASCC system OFF:
§ Press the CANCEL button
E. The CRUISE indicator on the
instrument cluster will turn off and the LCD screen ASCC
image will show cancelled
Advanced Smart Cruise Control (ASCC\f*
Quick \bips
The speed setting for the ASCC can be adjusted
under the following conditions:
- With no vehicle in front, you must be travelling at
a minimum speed of 20 mph
- When following a vehicle, there is no minimum
speed requirement
When following a vehicle, the system will
automatically adjust your cruise speed based on
the vehicle in front. It will even bring the vehicle to
a complete stop if necessary. If the vehicle remains
at a standstill for more than 3 seconds, the system
will disable.
To change the cruise control mode from ASCC to
standard cruise control, press and hold button
C.
Repeat to switch back to ASCC mode. (The ASCC
system must not be activated to change modes).
www.KuTechVideos.com/kh13/2016
ADVANCED SMART
CRUISE CONTROL
(ASCC) VIDEO
To view a video on
your mobile device,
snap this QR Code or
visit the listed website.
Refer to page 2 for
more information.
REMINDERS:
-
CRUISE indicator must be ON in order to
operate ASCC
- The cruise control system will not activate until
the brake pedal has been depressed at least once
after ignition ON or engine starting
C
BA
E65mphCRUISE
(Display on
instrument cluster)
(Buttons located on right side of the steering wheel)D
29319_Text.indd 1811/6/15 10:22 AM

STEERING WHEEL CONTROLS
19*IF EQUIPPED
A LWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS.
Standard Cruise Control
A Cruise Control ON/OFF button: Press up to turn the
cruise control ON/OFF
B Resume Cruising Speed button: Press up to resume or
increase cruising speed
C Set Cruising Speed button: Press down to set or
decrease cruising speed
D Cruise Control Cancel button: To cancel cruise control
setting, do one of the following:
§ Press the brake pedal
§ Press the CANCEL button
Quick Tip

The standard cruise control system is designed to
function above approximately 20 mph only.
\fdvanced Smart Cruise Control (\fSCC\b* (Continued\b
\fudio Controls
REMINDERS:
- Your vehicle’s steering wheel buttons may differ
from those in the images. See your Owner’s
Manual for more details
- Driving while distracted is dangerous and should
be avoided. Drivers should remain attentive to
driving and always exercise caution when using the
steering-wheel-mounted controls while driving
F Audio System Mode button: Press to cycle through
F M1-2 /A M / S AT 1-3/CD/USB/Aux/iPod®
G Seek/Preset buttons:
§
Radio Mode: Press to advance through preset stations.
Press and hold to AUTO SEEK
§ CD/USB/iPod
® Mode: Press to move TRACK UP/
DOWN. Press and hold to FF/REW
H Volume buttons: Press VOL+ / V O L- arrows to raise/
lower volume
I MUTE button: Press up to mute all audio
Quick Tips
- Pressing the Audio System Mode button for more
than 1 second will turn Audio Mode ON/OFF
- Surround Sound can be turned on or off
H
G
H
I
GF
(Buttons located on left side of the steering wheel)
29319_Text.indd 1911/6/15 10:22 AM

STEERING WHEEL CONTROLS
*IF EQUIPPED 20
A Volume button: Press VOL +/ VOL – to raise/lower
speaker volume
B MUTE button: Press up to mute the microphone during a call
C Talk button: Press down to activate Voice Recognition,
bring up menus, place calls with minimal voice command
prompts from the system and use Siri
® Eyes Free (paired
iPhone® required)
D Receive/Place Call button: Press up to place/receive/
transfer calls. Press up to place a call using voice command
prompts from the system or to answer an incoming call
E End Call button: Press down to end a call or cancel
a function
Bluetooth® Wireless Technology
Quic\f Tips
- When using the voice command feature, wait for
the system BEEP before speaking the command
- Phonebook transfer upload time varies by phone
model and with number of phonebook entries
- Because of differences in phone qualit y, service
providers and Bluetooth
® wireless technology
chip programming, functionality may differ from
one phone to another
- Changing the language in settings may delete
paired phones
REMINDERS:
- Your vehicle’s steering wheel buttons may differ from those in the image.
See your Owner’s Manual for more details
- Driving while distracted is dangerous and should be avoided. Drivers should
remain attentive to driving and always exercise caution when using the
steering-wheel-mounted controls while driving
For more information, refer to the Car Navigation System Owner’s Manual.
For Bluetooth
® wireless technology FAQs, go to www.kia.com, Owners section.
A
B
C
D
E
(Buttons located on left side
of the steering wheel)
29319_Text.indd 2011/6/15 10:22 AM

CENTER PA NEL
*IF EQUIPPED 22
Driver Information System (DIS) Contro\fs
B Home – Displays the audio control unit’s
Home menu which provides access to the
following options: Phone, U VO*, Settings,
Media, SiriusXM
®*, FM /A M, Navigation*, and
SiriusXM Data®*
C Phone – Displays the Phone menu which
provides access to the following options:
Keypad, Call His tor y, Contacts and Favorites
D Map/Voice – Displays a map of the current
location or repeats voice guidance
ABC
D
E
F
J
HG
K
L
L
I
E Nav – Displays the navigation screen which
provides access to the following menu options:
Route, Destination, Nearby POI Search, Add
to Address Book, Tr a f c, Guidance Volume
and Settings
F Menu – Provides access to additional
functions when available
G Back – Returns to the previous screen
Provides access to
all navigation and audio system control unit features.
A Controller – In addition to the touchscreen, the controller serves as a means for navigating K900’s UVO
Luxury Services with Premium Navigation system. The controller is actually three buttons: A scroll knob —
for scrolling the keyboard and menus and zooming in and out on the map screen; an 8-way joystick — for
toggling from left to right and top to bottom of menus and moving the focus of the navigation map; and a
push button — for selecting the highlighted feature
Scro\f\f Knob \b-Way Joystick Push Button
29319_Text.indd 2211/6/15 10:22 AM

CENTER PA NEL
*IF EQUIPPED 26
A Driver’s Te m p e r a t u r e Control buttons
B AUTO (Automatic) Climate Control button
C Front Windshield Defrost button
D Fan Speed Control buttons
E Mode Select button
F Recirculated Air ON/OFF button
G Front Passenger’s Te m p e r a t u r e Control buttons
H Climate Control System OFF button
I Rear Window Defrost button
J Air Conditioning ON/OFF button
K SYNC (Synchronize All Zones) Te m p e r a t u r e
Control button
L CLIMATE Information Screen Selection button
Automatic Climate Control System
A
BC
D
EF
IJKL
G
H
Climate Control Auto Function
Press AUTO
B to select full auto operation. In AUTO
mode the dr i ver, front passenger and rear passenger
have full control of their own temperature zones.
The mode, fan speed, air intake and air conditioning
will activate and adjust accordingly to achieve the
temperature settings for each zone.
To set temperatures:
§ Press
A to set the driver’s zone temperature
§ Press
G to set the front passenger’s zone
temperature
REMINDER: Pressing any button during AUTO operation will
deactivate the AUTO function and switch to manual mode,
except for temperature control.
Front Climate Control
De\frost Outside Winds\bield
1. Set fan speed to the highest position
2. Set temperature to hot
3. Press the front defrost button
Face-Level
F lo o r- L evel
Bi-Level Floor/Defrost-Level
Air
Flow Modes
To select air ow modes, press the Mode Select
button
E:
Tr i - Z o n e Climate Control
Pressing the SYNC button
K synchronizes all three
climate control zones (dr i ver, passenger and rear)
to the driver's temperature control. De\fog
Inside Winds\bield
1. Set desired fan speed
2. Set desired temperature
3. Press the front defrost button
29319_Text.indd 2611/6/15 10:22 AM

S E AT I N G
*IF EQUIPPED 34
Seat Warmers / Ventilated Seats
Quick \fip
With the seat warmer switch in the ON position,
the heating system in the seat turns OFF or ON
automatically depending on the seat temperature.
www.KuTechVideos.com/kh13/2016
SE AT WARMERS AND
VENTILATED SE AT S
VIDEO
To view a video on
your mobile device,
snap this QR Code or
visit the listed website.
Refer to page 2 for
more information.Front Seats
Seat Warmers – Press button
A once for high setting (3
LEDs lit). Press button twice for medium setting (2 LEDs lit).
Press a third time for low setting (1 LED lit) and again to
turn O F F.
Ventilated Seats – Press button
B once for high setting (3
LEDs lit). Press twice for medium setting (2 LEDs lit). Press a
third time for low setting (1 LED lit) and again to turn O F F.
\bear Seats
Seat Warmers – Press top of button
C once for high setting
(3 LEDs lit). Press button twice for medium setting (2 LEDs
lit). Press a third time for low setting (1 LED lit) and again to
turn O F F.
Ventilated Seats* – Press bottom of button
D once for high
setting (3 LEDs lit). Press twice for medium setting (2 LEDs
lit). Press a third time for low setting (1 LED lit) and again to
turn O F F.
D
D
C
C
A
B
REMINDER: Use extreme caution when using the
seat warmers to avoid burns. Refer to the Owner’s
Manual for more information.
(Rear Passenger Controls are located in the middle of the rear seat) (Buttons are located on the door panel)
29319_Text.indd 3411/6/15 10:24 AM

S E AT I N G
35*IF EQUIPPED
A LWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS.
Move/press controls to adjust headrest, seat forward/backward position, seat cushion length, seatback
angle or lumbar support.
Headrest Height Adjustment*: Move button
A up/down to adjust headrest height
Seatback Angle Adjustment: Move button
B forward/backward to adjust seatback angle
Seat Sliding, Seat Height and Cushion Length* Adjustments:
§ Move button
C forward/backward to slide seat
§ Move front part of button
D up/down to raise/lower front part of seat
§ Move back part of button
E up/down to raise/lower back part of seat
§ Move button
F forward/backward to increase/decrease cushion length*
Lumbar Support Adjustment:
§ Press
G to increase support
§ Press
H to decrease support
§ Press
I to move lumbar support up/down
Power Adjustable Driver’s \feat
A
B
ED
F
C
GH
I
I
(Buttons located on left side of seat cushion)
(Controls located on door panel)
Power Height Adjustment* – To adjust the height, move
the seat control button A up/down.
Manual Tilt Adjustment – To adjust the headrest forward/
backward, tilt the lower part of the headrest at a slight angle.
Power Front \feat Headrest Adjust\bent*
29319_Text.indd 3511/6/15 10:24 AM