2016 KIA CEED high beam

 Dual clutch transmission shift indicator . . . . . . . . . . 4-50
 Speed limiter indicator . . . . . . . . . . . . . . . . . . . . . . . . 4-51
 Odometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-51
 Trip computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-51
Instrument cluster (Super vision) . . . . . . . . . . . . . 4-59  Instrument panel illumination . . . . . . . . . . . . . . . . . . 4-61
 Cluster display mode conversion . . . . . . . . . . . . . . . . 4-61
 Gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-61
 Manual transaxle shift indicator . . . . . . . . . . . . . . . . 4-64
 Automatic transaxle shift position indicator . . . . . . 4-65
 Dual clutch transmission shift indicator . . . . . . . . . . 4-65
 Speed limiter indicator . . . . . . . . . . . . . . . . . . . . . . . 4-66
 Odometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-66
 Trip computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-67
 LCD display information . . . . . . . . . . . . . . . . . . . . . . 4-74
 Warnings and indicators. . . . . . . . . . . . . . . . . . . . . . . 4-80
LCD display warnings and indicators (instrument panel display) . . . . . . . . . . . . . . . . . 4-91
Rear parking assist system . . . . . . . . . . . . . . . . . . 4-93  Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-93
 Non-operational conditions . . . . . . . . . . . . . . . . . . . . 4-95
 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-95
 Self-diagnosis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-96
Parking assist system . . . . . . . . . . . . . . . . . . . . . . . 4-97  Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-98
 Non-operational conditions . . . . . . . . . . . . . . . . . . . 4-100
 Self-diagnosis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-101 Smart Parking Assist System (SPAS) . . . . . . . . . 4-102
 Operating condition . . . . . . . . . . . . . . . . . . . . . . . . . 4-103
 Non-operating condition . . . . . . . . . . . . . . . . . . . . . . 4-104
 How the system works (Parking mode) . . . . . . . . . 4-107
 How the system works (Exit mode) . . . . . . . . . . . . . 4-113
 Additional instructions (messages). . . . . . . . . . . . . . 4-116
 System malfunction . . . . . . . . . . . . . . . . . . . . . . . . . . 4-117
Rearview camera . . . . . . . . . . . . . . . . . . . . . . . . . 4-118
Hazard warning flasher . . . . . . . . . . . . . . . . . . . . 4-118
Lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-119  Battery saver function . . . . . . . . . . . . . . . . . . . . . . . . 4-119
 Headlamp delay function . . . . . . . . . . . . . . . . . . . . . 4-119
 Headlight (Headlamp) welcome function . . . . . . . . 4-119
 Static bending light . . . . . . . . . . . . . . . . . . . . . . . . . . 4-120
 Lighting control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-120
 High - beam operation . . . . . . . . . . . . . . . . . . . . . . . 4-122
 Turn signals and lane change signals . . . . . . . . . . . 4-123
 Front fog light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-124
 Rear fog light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-124
 Daytime running light . . . . . . . . . . . . . . . . . . . . . . . . 4-124
 Headlight leveling device . . . . . . . . . . . . . . . . . . . . . 4-125
 Adaptive Front Lighting System (AFLS) . . . . . . . . 4-126
Wipers and washers . . . . . . . . . . . . . . . . . . . . . . . 4-127  Windshield wipers (front) . . . . . . . . . . . . . . . . . . . . . 4-127
 Windshield washers (front) . . . . . . . . . . . . . . . . . . . 4-129
 Rear window wiper and washer switch. . . . . . . . . . 4-130
Interior light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-131  Interior lamp AUTO cut . . . . . . . . . . . . . . . . . . . . . . 4-131
4
JD PE eng 4.QXP 1/28/2016 5:11 PM Page 2

Features of your vehicle
82
4
Electronic Power Steering
(EPS) system warning light(if equipped)
This indicator light comes on after the
ignition key is turned to the ON position
and then it will go off in approximately 3
seconds if there is no problem with EPS. This light also comes on when the EPS
has some problems. If it comes on while
driving, we recommend that the system
be checked by an authorized Kia dealer.
Turn signal indicator lights
The blinking green arrows on the instru-
ment panel show the direction indicated
by the turn signals. If the arrow comes on
but does not blink, blinks more rapidly
than normal, or does not illuminate at all,
a malfunction in the turn signal system is
indicated. Your dealer should be consult-
ed for repairs.
Light on indicator
The indicator illuminates when the tail lights or headlights are ON.
Low Beam Indicator Light(if equipped)
This indicator light illuminates when the headlights are on.
High beam indicator
This indicator illuminates when the head- lights are on and in the high beam posi-
tion or when the turn signal lever is pulled
into the Flash-to-Pass position.
JD PE eng 4.QXP 1/28/2016 5:18 PM Page 82

Features of your vehicle
122
4
High - beam operation
1. Turn the light switch to the headlight
position.
2. Push the lever away from you. The high-beam indicator will light when
the headlight high beams are switched on.
To prevent the battery from being dis- charged, do not leave the lights on fora prolonged time while the engine is
not running.Flashing headlights
Pull the lever towards you. It will return to
the normal position when released. The
headlight switch does not need to be on
to use this flashing feature.
WARNING
Do not use high beam when there
are other vehicles. Using highbeam could obstruct the other dri-ver's vision.
OED040801OED040802
JD PE eng 4.QXP 1/28/2016 5:21 PM Page 122

4125
Features of your vehicle
Headlight leveling device (if equipped)
Manual type
To adjust the headlight beam level
according to the number of the passen-
gers and the loading weight in the lug-
gage area, turn the beam leveling switch.The higher the number of the switch is
positioned, the lower the headlight beam
level. Always keep the headlight beam at
the proper leveling position, or headlights
may dazzle other road users.
Listed below are the examples of proper
switch settings. For loading conditions
other than those listed below, adjust the
switch position so that the beam level
may be the nearest as the conditionobtained according to the list.
Automatic type
It automatically adjusts the headlight
beam level according to the number of
passengers and loading weight in theluggage area.
And it offers proper headlight beam
under various conditions.
OJD042049
Loading condition Switch position
Driver only 0
Driver + Front passenger 0 Full passengers
(including driver) 1
Full passengers (including
driver) + Maximum permis-
sible loading 2
Driver + Maximum permis-
sible loading 3
WARNING
If it does not work properly even
though your car is inclined back-
ward according to passenger's
posture, or the headlight beam is
irradiated to the high or low posi-
tion, we recommend that the sys-
tem be inspected by an authorized
Kia dealer. Do not attempt to inspect or
replace the wiring yourself.
JD PE eng 4.QXP 1/28/2016 5:21 PM Page 125

783
Maintenance
Headlight (Low, HID type),Position light/DRL (LED type)
If the light does not operate, we recom-
mend that the system be checked by an
authorized Kia dealer.
✽✽ NOTICE
HID lamps have superior performance
vs. halogen bulbs. HID lamps are esti-
mated by the manufacturer to last twice
as long or longer than halogen bulbs
depending on their frequency of use.
They will probably require replacement
at some point in the life of the vehicle.
Cycling the headlamps on and off more
than typical use will shorten HID lamps
life. HID lamps do not fail in the same
manner as halogen incandescent lamps.
If a headlamp goes out after a period of
operation but will immediately relight
when the headlamp switch is cycled it is
likely the HID lamp needs to be replaced.
HID lighting components are more com-
plex than conventional halogen bulbs
thus have higher replacement cost.
❈❈ Traffic Change (For Europe)
The low beam light distribution is asym-
metric. If you go abroad to a country with
opposite traffic direction, this asymmetric
part will dazzle oncoming car driver. To
prevent dazzle, ECE regulation demand
several technical solutions (ex. automatic
change system, adhesive sheet, down
aiming). This headlamps are designed
not to dazzle opposite drivers. So, you
need not change your headlamps in a
country with opposite traffic direction.
WARNING - HID Headlight
low beam (if equipped)
Do not attempt to replace or
inspect the low beam (XENON bulb)
due to electric shock danger. If the
low beam (XENON bulb) is not
working, we recommend that the
system be checked by an author-
ized Kia dealer.
OHD076046
WARNING - Halogen bulbs
Halogen bulbs contain pressurized
gas that will produce flying pieces
of glass if broken.
Always handle them carefully, and avoid scratches and abrasions. If
the bulbs are lit, avoid contact with
liquids. Never touch the glass with
bare hands. Residual oil may cause
the bulb to overheat and burst
when lit. A bulb should be operated
only when installed in a headlight.
If a bulb is damaged or cracked, replace it immediately and carefullydispose of it.
Wear eye protection when chang- ing a bulb. Allow the bulb to cool
down before handling it.
JD PE eng 7.QXP 1/28/2016 5:40 PM Page 83

785
Maintenance
4. Remove the bulb-socket from thehousing by turning the socket counter
clockwise until the tabs on the socketalign with the slots on the housing.
5. Install the new bulb-socket into the housing by aligning the tabs on the
socket with the slots in the housing.
Push the socket into the housing and
turn the socket clockwise.
6. Connect the power connector to the socket. Headlight and front fog light aim-
ing (for Europe)
Headlight aiming
Without AFLS
1. Inflate the tires to the specified pres-
sure and remove any loads from the
vehicle except the driver, spare tire,
and tools.
2. The vehicle should be placed on a flat floor.
3. Draw vertical lines (Vertical lines pass- ing through respective head lamp cen-
ters) and a horizontal line (Horizontalline passing through center of headlamps) on the screen. 4. With the head lamp and battery in nor-
mal condition, aim the head lamps so
the brightest portion falls on the hori-
zontal and vertical lines.
5. To aim the low beam left or right, turn the driver (1) clockwise or counter-
clockwise. To aim the low beam up or
down, turn the driver (2) clockwise or
counterclockwise.
To aim the high beam up or down, turnthe driver (3) clockwise or counter-
clockwise.
OJD072027
■ Fog light
■Fog light+DRL (Bulb type) ■
DRL
OJD073067/OJD073068/OJD073069
JD PE eng 7.QXP 1/28/2016 5:40 PM Page 85

Maintenance
86
7
With AFLS
1. Turn off the engine
2. Turn the light switch to the low beam
position.
3. Position the tires straight ahead with
the steering wheel.
4. Turn on the engine.
5. Inflate the tires to the specified pres-
sure and remove any loads from the
vehicle except the driver, spare tire,
and tools.
6. The vehicle should be placed on a flat
floor.
7. Draw vertical lines (Vertical lines pass- ing through respective head lamp cen-
ters) and a horizontal line (Horizontalline passing through center of headlamps) on the screen.
8. With the head lamp and battery in nor- mal condition, aim the head lamps so
the brightest portion falls on the hori-
zontal and vertical lines.
9. To aim the low beam left or right, turn the driver (1) clockwise or counter-
clockwise. To aim the low beam up or
down, turn the driver (2) clockwise or
counterclockwise. To aim the high
beam up or down, turn the driver (3)
clockwise or counterclockwise.Front fog light aiming
The front fog lamp can be aimed as the same manner of the head lamps aiming.
With the front fog lamps and battery nor-
mal condition, aim the front fog lamps. To
aim the front fog lamp up or down, turn the
driver (1) clockwise or counterclockwise.
OJD075028
OJD075070
OJD073082
■Type A
■Type B
■Type C
JD PE eng 7.QXP 1/28/2016 5:40 PM Page 86

787
Maintenance
Aiming point
OJD075051
< Ground Height >< Distance between lamps >
H1 : Height between the head lamp bulb center and ground (Low beam)
H2 : Height between the head lamp bulb center and ground (High beam)
H3 : Height between the fog lamp bulb center and ground
W1 : Distance between the two head lamp bulbs centers (Low beam)
W2 : Distance between the two head lamp bulbs centers (High beam)
W3 : Distance between the two fog lamp bulbs centers
JD PE eng 7.QXP 1/28/2016 5:40 PM Page 87