adjusted either from the radio volume control knob or
from the steering wheel radio control (right switch), if
equipped.
The radio display will be used for visual prompts from
the Uconnect Phone such as “CELL” or caller ID on
certain radios.
Operation
Voice commands can be used to operate the Uconnect
Phone and to navigate through the Uconnect Phone
menu structure. Voice commands are required after most
Uconnect Phone prompts. You will be prompted for a
specific command and then guided through the available
options.
•Prior to giving a voice command, one must wait for the
beep, which follows the “Ready” prompt or another
prompt. •
For certain operations, compound commands can be
used. For example, instead of saying “Setup” and then
“Pair a Device,” the following compound command
can be said: “Pair a Bluetooth Device.”
• For each feature explanation in this section, only the
compound form of the voice command is given. You
can also break the commands into parts and say each
part of the command when you are asked for it. For
example, you can use the compound form voice com-
mand “Phonebook New Entry,” or you can break the
compound form command into two voice commands:
“Phonebook” and “New Entry.” Please remember, the
Uconnect Phone works best when you talk in a normal
conversational tone, as if speaking to someone sitting a
few feet/meters away from you.
114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
▫INFO Button — DISC Mode For MP3/WMA
Play .............................. .274
▫ Uconnect (Satellite Radio) — If Equipped . . . .276
UCONNECT 430/430N CD/DVD/HDD/NAV —
IF EQUIPPED ........................ .280
▫ Operating Instructions (Voice Command
System) — If Equipped .................280
▫ Operating Instructions (Uconnect Phone) — If
Equipped .......................... .280
UCONNECT 130 ...................... .281
▫ Operating Instructions — Radio Mode ......281
▫ Operation Instructions — CD MODE For CD And
MP3 Audio Play ..................... .284
▫ Notes On Playing MP3 Files .............286
▫ Operation Instructions — Auxiliary Mode . . . .289
UCONNECT 130 WITH SATELLITE RADIO . . .290
▫ Operating Instructions — Radio Mode ......290
▫ Operation Instructions — CD MODE For CD And
MP3 Audio Play ..................... .296
▫ Notes On Playing MP3 Files .............298
▫ LIST Button — CD Mode For MP3 Play ......301
▫ INFO Button — CD Mode For MP3 Play .....301
▫ Uconnect (Satellite Radio) — If Equipped . . . .302
iPod/USB/MP3 CONTROL — IF EQUIPPED . . .306
▫
Connecting The iPod Or External USB Device . .307
▫ Using This Feature .....................307
▫ Controlling The iPod Or External USB Device
Using Radio Buttons ...................308
▫ Play Mode ......................... .308
4
UNDERSTANDING YOUR INSTRUMENT PANEL 215
You may add a second channel to each pushbutton by
repeating the above procedure with this exception: Push
the SET button twice and SET 2 will show in the display
window. Each button can be set for SET 1 and SET 2. This
allows a total of 12 Satellite channels to be stored into
pushbutton memory. The channels stored in SET 2
memory can be selected by pushing the pushbutton
twice.
Every time a preset button is used, a corresponding
button number will display.
Buttons1-6
These buttons tune the radio to the channels that you
commit to pushbutton memory (12 Satellite stations).
UCONNECT 430/430N CD/DVD/HDD/NAV — IF
EQUIPPED
Refer to your Uconnect Supplement Manual for detailed
operating instructions.
Operating Instructions (Voice Command System)
— If Equipped
Refer to “Voice Command” for further details.
Operating Instructions (Uconnect Phone) — If
Equipped
Refer to “Uconnect Phone” for further details.
280 UNDERSTANDING YOUR INSTRUMENT PANEL
