Remote ControlDoor Locks ............................20
Security Alarm ..........................18
Remote Keyless Entry (Sedan) .................20
Remote Starting System ......................26
Replacement Bulbs ....................... .534
Replacement Keys .........................16
Replacement Parts ........................ .493
Replacement Tires .........................411
Reporting Safety Defects ....................559
Restraint, Head .......................... .156
Restraints, Child ...........................75
Retractable Cargo Area Cover ................203
Roll Over Warning ..........................4
Roof Type Carrier ........................ .210
Rotation, Tires .......................... .413
Safety Checks Inside Vehicle ..................99
Safety Checks Outside Vehicle ................101Safety Defects, Reporting
....................559
Safety, Exhaust Gas .........................98
Safety Information, Tire .....................388
Safety Tips ...............................97
Satellite Radio Antenna ..................277, 303
Schedule, Maintenance .....................544
Seat Belt Adjustable Upper Shoulder Belt Anchorage ......48
Automatic Locking Retractor (ALR) ...........54
Energy Management Feature ................54
Lap/Shoulder Belt Operation ................46
Lap/Shoulder Belts .......................43
Lap/Shoulder Belt Untwisting ...............48
Pregnant Women ........................53
Seat Belt Extender .......................52
Seat Belt Pretensioner .....................54
Seat Belt Reminder .......................41
Seat Belt Maintenance ..................... .528
Seat Belt Reminder .........................41
10
INDEX 577
INSTALLATION OF RADIO TRANSMITTING
EQUIPMENT
Special design considerations are incorporated into this
vehicle’s electronic system to provide immunity to radio
frequency signals. Mobile two-way radios and telephone
equipment must be installed properly by trained person-
nel. The following must be observed during installation.
The positive power connection should be made directly
to the battery and fused as close to the battery as possible.
The negative power connection should be made to body
sheet metal adjacent to the negative battery connection.
This connection should not be fused.
Antennas for two-way radios should be mounted on the
roof or the rear area of the vehicle. Care should be used
in mounting antennas with magnet bases. Magnets may
affect the accuracy or operation of the compass on
vehicles so equipped.The antenna cable should be as short as practical and
routed away from the vehicle wiring when possible. Use
only fully shielded coaxial cable.
Carefully match the antenna and cable to the radio to
ensure a low Standing Wave Ratio (SWR).
Mobile radio equipment with output power greater than
normal may require special precautions.
All installations should be checked for possible interfer-
ence between the communications equipment and the
vehicle’s electronic systems.
