2016 INFINITI QX60 homelink

120v outlet (if so equipped)....................2-49
E-call (SOS) switch (if so equipped)................2-50
Extended storage switch..........................2-50
Storage.........................................2-51
Map pockets..................................2-51
Seatback pockets.............................2-51
Glove box....................................2-52
Console box..................................2-52
Storage trays.................................2-53
Sunglasses holder.............................2-54
Cup holders..................................2-54
Luggage hooks................................2-56
Cargo area storage bin.........................2-57
Roof rack (if so equipped)......................2-57
Windows........................................2-58
Power windows...............................2-58
Moonroof........................................2-61
Power moonroof...............................2-61Dual panel moonroof (if so equipped)...............2-62
Power moonroof...............................2-62
Interior lights.....................................2-65
Console light (if so equipped)...................2-65
Map lights....................................2-66
Personal Lights................................2-66
Luggage compartment light.....................2-66
Homelink® universal transceiver (if so equipped).....2-67
Programming HomeLink®......................2-67
Programming HomeLink® for Canadian
customers and gate openers....................2-69
Operating the HomeLink® universal
transceiver....................................2-69
Programming trouble-diagnosis.................2-69
Clearing the programmed information............2-70
Reprogramming a single HomeLink® button......2-70
If your vehicle is stolen.........................2-70

The HomeLink® Universal Transceiver provides
a convenient way to consolidate the functions of
up to three individual hand-held transmitters into
one built-in device.
HomeLink® Universal Transceiver:
●Will operate most radio frequency devices
such as garage doors, gates, home and of-
fice lighting, entry door locks and security
systems.
●Is powered by your vehicle’s battery. No
separate batteries are required. If the vehi-
cle’s battery is discharged or is discon-
nected, HomeLink® will retain all program-
ming.
When the HomeLink® Universal Trans-
ceiver is programmed, retain the original
transmitter for future programming proce-
dures (Example: new vehicle purchases) .
Upon sale of the vehicle, the programmed
HomeLink® Universal Transceiver buttons
should be erased for security purposes. For
additional information, refer to “Program-
ming HomeLink®” in this section.WARNING
●Do not use the HomeLink® Universal
Transceiver with any garage door
opener that lacks safety stop and re-
verse features as required by federal
safety standards. (These standards be-
came effective for opener models
manufactured after April 1, 1982) . A ga-
rage door opener which cannot detect
an object in the path of a closing garage
door and then automatically stop and
reverse, does not meet current federal
safety standards. Using a garage door
opener without these features in-
creases the risk of serious injury or
death.
●During the programming procedure
your garage door or security gate will
open and close (if the transmitter is
within range) . Make sure that people or
objects are clear of the garage door,
gate, etc. that you are programming.
●Your vehicle’s engine should be turned
off while programming the HomeLink®
Universal Transceiver. Do not breathe
exhaust gases; they contain colorless
and odorless carbon monoxide. Carbon
monoxide is dangerous. It can cause
unconsciousness or death.
PROGRAMMING HOMELINK®
If you have any questions or are having difficulty
programming your HomeLink® buttons, refer to
the HomeLink® web site at: www.homelink.com
or call 1-800-355-3515.
NOTE:
Place the ignition switch in the ACC posi-
tion when programming HomeLink®. It is
also recommended that a new battery be
placed in the hand-held transmitter of the
device being programmed to HomeLink®
for quicker programming and accurate
transmission of the radio frequency.
HOMELINK® UNIVERSAL
TRANSCEIVER (if so equipped)
Instruments and controls2-67

1. Position the end of your hand-held transmit-
ter 1–3 in (2–8 cm) away from the
HomeLink® surface, keeping the
HomeLink® indicator light
1in view.2. Using both hands, simultaneously press and
hold the desired HomeLink® button and
hand-held transmitter button. DO NOT re-
lease until the HomeLink® indicator light1
flashes slowly and then rapidly. When the
indicator light flashes rapidly, both buttons
may be released. (The rapid flashing indi-
cates successful programming.)
NOTE:
Some devices may require you to replace
Step 2 with the cycling procedure noted in
“Programming HomeLink® for Canadian
customers and gate openers” in this section.
3. Press and hold the programmed
HomeLink® button and observe the indica-
tor light.
●If the indicator light
1is
solid/continuous, programming is
completeand your device should acti-
vate when the HomeLink® button is
pressed and released.
●If the indicator light
1blinksrapidly for
2 seconds and then turns to a
solid/continuous light, continue
with Steps 4-6for a rolling code device.
A second person may make the following
steps easier. Use a ladder or other device.
Do not stand on your vehicle to perform
the next steps.
4. At the receiver located on the garage door
opener motor in the garage, locate the
“learn” or “smart” button (the name and color
of the button may vary by manufacturer but it
is usually located near where the hanging
antenna wire is attached to the unit) . If there
is difficulty locating the button, reference the
garage door opener’s manual.
5. Press and release the “learn” or “smart” but-
ton.
LIC2365LIC2366
2-68Instruments and controls

6. Return to the vehicle and firmly press and
hold the trained HomeLink® button for
2 seconds and release. Repeat the
“press/hold/release” sequence up to three
times to complete the training process.
HomeLink® should now activate your rolling
code equipped device.
7. If you have any questions or are having diffi-
culty programming your HomeLink® but-
tons, refer to the HomeLink® web site at:
www.homelink.com or call 1-800-355-
3515.
PROGRAMMING HOMELINK® FOR
CANADIAN CUSTOMERS AND
GATE OPENERS
Canadian radio-frequency laws require transmit-
ter signals to “time-out” (or quit) after several
seconds of transmission – which may not be long
enough for HomeLink® to pick up the signal
during training. Similar to this Canadian law,
some U.S. gate operators are designed to “tim-
eout” in the same manner.
If you live in Canada or you are having difficulties
training a gate operatororgarage door opener
by using the “Training” procedures,replace
“Programming HomeLink®”Step 2with the fol-
lowing:NOTE:
When programming a garage door opener,
etc., unplug the device during the “cycling”
process to prevent possible damage to the
garage door opener components.
1.
For additional information, refer to “Program-
ming HomeLink®” step 1 in this section.
2. Using both hands, simultaneously press and
hold the desired HomeLink® button and the
hand-held transmitter button. During train-
ing, your hand-held transmitter may auto-
matically stop transmitting. Continue to
press and hold the desired HomeLink® but-
ton while you press and re-press (“cycle”)
your hand-held transmitter every 2 seconds
until the frequency signal has been learned.
The HomeLink® indicator light will flash
slowly and then rapidly after several seconds
upon successful training. DO NOT release
until the HomeLink® indicator light flashes
slowly and then rapidly. When the indicator
light flashes rapidly, both buttons may be
released. The rapid flashing indicates suc-
cessful training.
Proceed with “Programming HomeLink®”
step 3 to complete.
If the device was unplugged during the pro-
gramming procedure, remember to plug it
back in when programming is completed.
OPERATING THE HOMELINK®
UNIVERSAL TRANSCEIVER
The HomeLink® Universal Transceiver, after it is
programmed, can be used to activate the pro-
grammed device. To operate, simply press and
release the appropriate programmed
HomeLink® Universal Transceiver button. The
amber indicator light will illuminate while the sig-
nal is being transmitted.
For convenience, the hand-held transmitter of the
device may also be used at any time.
PROGRAMMING TROUBLE-
DIAGNOSIS
If the HomeLink® does not quickly learn the
hand-held transmitter information:
●replace the hand-held transmitter batteries
with new batteries.
●position the hand-held transmitter with its
battery area facing away from the
HomeLink® surface.
●press and hold both the HomeLink® and
hand-held transmitter buttons without inter-
ruption.
Instruments and controls2-69

●position the hand-held transmitter1-3in(2
- 8 cm) away from the HomeLink® surface.
Hold the transmitter in that position for up to
15 seconds. If HomeLink® is not pro-
grammed within that time, try holding the
transmitter in another position – keeping the
indicator light in view at all times.
If you continue to have programming difficulties,
please contact the INFINITI Consumer Affairs
Department. The phone numbers are located in
the Foreword of this manual.
CLEARING THE PROGRAMMED
INFORMATION
The following procedure clears the programmed
information from both buttons. Individual buttons
cannot be cleared. However, individual buttons
can be reprogrammed. For additional informa-
tion, refer to “Reprogramming a single
HomeLink® button” in this section.
To clear all programming:
1. Press and hold the two outer HomeLink®
buttons until the indicator light begins to
flash in approximately 10 seconds. Do not
hold for longer than 20 seconds.
2. Release both buttons.HomeLink® is now in the programming mode
and can be programmed at any time beginning
with “Programming HomeLink®” - Step 1.
REPROGRAMMING A SINGLE
HOMELINK® BUTTON
To reprogram a HomeLink® Universal Trans-
ceiver button, complete the following:
1. Press and hold the desired HomeLink® but-
ton.DO NOTrelease the button.
2. The indicator light will begin to flash after
20 seconds. Without releasing the
HomeLink® button, proceed with “Pro-
gramming HomeLink®” - Step 1.
For questions or comments, contact HomeLink®
at: www.homelink.com or 1–800–355–3515
(except Mexico) .
The HomeLink® Universal Transceiver button
has now been reprogrammed. The new device
can be activated by pushing the HomeLink®
button that was just programmed. This procedure
will not affect any other programmed HomeLink®
buttons.
IF YOUR VEHICLE IS STOLEN
If your vehicle is stolen, you should change the
codes of any non-rolling code device that has
been programmed into HomeLink®. Consult the
Owner’s Manual of each device or call the manu-
facturer or dealer of those devices for additional
information.
When your vehicle is recovered, you will
need to reprogram the HomeLink® Univer-
sal Transceiver with your new transmitter
information.
FCC Notice:
For USA:
This device complies with Part 15 of the
FCC Rules. Operation is subject to the fol-
lowing two conditions: (1) This device may
not cause interference, and (2) this device
must accept any interference received, in-
cluding interference that may cause unde-
sired operation.
NOTE:
Changes or modifications not expressly ap-
proved by the party responsible for compli-
ance could void the user’s authority to op-
erate the equipment.
2-70Instruments and controls

AUTOMATIC ANTI-GLARE
REARVIEW MIRROR
The inside mirror is designed so that it automati-
cally dims according to the intensity of the head-
lights of the vehicle following you. The automatic
anti-glare feature operates only when the ignition
switch is in the ON position.
The indicator light
2will illuminate when the
automatic anti-glare feature is operating.
To turn off the automatic anti-glare feature, press
the O button. The indicator light will turn off.To turn on the automatic anti-glare feature, press
the | button again. The indicator light will turn
on.
For information on HomeLink® Universal Trans-
ceiver operation, refer to “HomeLink® Universal
Transceiver” in the “Instruments and controls”
section of this manual.
NOTE:
Do not hang any objects over the sensors
1or apply glass cleaner to the sensors.
Doing so will reduce the sensitivity of the
sensors, resulting in improper operation.
OUTSIDE MIRRORS
The outside mirror remote control will operate
only when the ignition switch is in the ACC or ON
position.
Move the small switch
1to select the left or right
mirror. Adjust each mirror to the desired position
using the large switch
2.
LPD0469LPD2269
MIRRORS
3-32Pre-driving checks and adjustments

Exhaust gas (Carbon monoxide).........5-4
Explanation of maintenance items........8-2
Extendedstorageswitch ............2-50
F
Flashers (See hazard warning flasher switch) . .6-2
Flat tire.......................6-3
Floor mat positioning aid.............7-5
Fluid
Brake fluid..................8-14
Capacities and recommended
fuel/lubricants.................9-2
Continuously Variable Transmission (CVT)
fluid......................8-13
Engine coolant.................8-8
Engine oil...................8-10
Power steering fluid.............8-13
Windshield-washerfluid...........8-14
F.M.V.S.S. certification label...........9-11
Foglightswitch .................2-41
Forward Emergency Braking (FEB).......2-10
Front air bag system
(See supplemental restraint system)......1-56
Front power seat adjustment...........1-3
Frontseats.....................1-2
Fuel
Capacities and recommended
fuel/lubricants.................9-2
Fuel economy................5-130
Fuel-filler door and cap...........3-27
Fuel gauge...................2-7
Fuel octane rating...............9-5
Fuel recommendation.............9-4
Loose fuel cap warning...........2-30Fuel Cell Vehicle (FCV) System
Tirepressure.................8-28
Fuel-filler door..................3-27
Fuelgauge.....................2-7
Fuses.......................8-22
Fusiblelinks ...................8-22
G
Garage door opener, HomeLink® Universal
Transceiver.............2-67,2-69,2-70
Gascap .....................3-27
Gauge
Engine coolant temperature gauge.....2-6
Fuel gauge...................2-7
Odometer...................2-5
Speedometer.................2-5
Tachometer..................2-6
Trip odometer.................2-5
General maintenance...............8-2
Glovebox.....................2-52
Gloveboxlock..................2-52
H
Hands-free phone system,
Bluetooth®...............4-113, 4-127
Hazard warning flasher switch..........6-2
Headlight aiming control............2-39
Headlight and turn signal switch........2-36
Headlight control switch............2-37
Headlights....................8-26
Headlights, aiming control............2-39
Head restraints..................1-11Heated rear seats................2-43
Heated seats...................2-42
Heated steering wheel.............2-45
Heater
Heater and air conditioner (automatic)
(if so equipped)...............4-48
Heater and air conditioner controls.....4-49
Heater operation
...............4-49
Heater and air conditioner (automatic).....4-48
Hill start assist system.............5-139
HomeLink® Universal
Transceiver.............2-67,2-69,2-70
Hood.......................3-21
Hook
Luggage hook................2-56
Horn .......................2-41
I
Ignition Switch
Push-Button Ignition Switch........5-13
Imageviewer...................4-21
Immobilizer system................5-16
Important vehicle information label.......9-11
In-cabin microfilter................8-19
Increasing fuel economy............5-130
Indicator lights and audible reminders
(See warning/indicator lights and audible
reminders)...............2-8,2-9,2-13
INFINITI Drive mode selector..........5-23
INFINITI Intelligent Key System.......3-2,3-7
INFINITI vehicle immobilizer
system................2-31,3-4,5-16
INFINITI voice recognition system.......4-139
Information display................2-16
10-3

Uniform tire quality grading.........9-30
Wheels and tires...............8-28
Wheel/tire size.................9-9
Tirepressure...................8-28
Low tire pressure warning light.......2-10
Tire Pressure Monitoring System (TPMS)....5-5
Top tether strap child restraint.........1-31
Towing
Flattowing..................9-29
Towing load/specification..........9-22
Towtrucktowing...............6-13
Trailer towing.................9-18
Towing a trailer..................9-18
Transceiver
HomeLink® Universal
Transceiver...........2-67,2-69,2-70
Transmission
Continuously Variable Transmission (CVT)
fluid......................8-13
Driving with Continuously Variable
Transmission (CVT).............5-18
Travel (See registering a vehicle in another
country)......................9-10
Trip odometer...................2-5
Turn signal switch................2-40
U
Uniform tire quality grading...........9-30
USB interface
Audio file operation..........4-84,4-85
Video file operation.............4-86
USB (Universal Serial Bus) Connection Port
(models with Navigation System)........4-84USB (Universal Serial Bus) Connection Port
(models without Navigation System)......4-83
V
Vanity mirror...................3-31
Vehicle dimensions and weights.........9-9
Vehicle dynamic control (VDC) off switch . . .2-47
Vehicle dynamic control (VDC) system....5-136
Vehicle Dynamic Control (VDC) system . . .5-136
Vehicle identification...............9-10
Vehicle identification number (VIN).......9-10
Vehicle identification number (VIN)
(Chassis number)................9-10
Vehicle identification number (VIN) plate....9-10
Vehicle immobilizer system...........5-16
Vehicle Information Display...........2-16
Vehicle loading information...........9-14
Vehicle recovery..............6-15,6-16
Vehicle security system.............2-30
(INFINITI vehicle immobilizer system) ,
engine start...........2-31,3-4,5-16
Vents.......................4-47
Visors.......................3-31
Voice Prompt Interrupt........4-117, 4-129
Voice recognition system...........4-139
W
Warning
Airbagwarninglight.........1-67,2-12
Anti-lock brake warning light.........2-9
Battery charge warning light.........2-9Blind Spot Intervention (BSI) warning
light......................5-46
Blind Spot Warning (BSW) warning
light......................5-37
Brake warning light..............2-9
Distance Control Assist (DCA).......5-95
Hazard warning flasher switch........6-2
Lane Departure Prevention . .5-26, 5-31, 5-34
Lane Departure Warning
light...............5-26,5-31,5-34
Loose fuel cap warning...........2-30
Low fuel warning light........2-11,2-27
Low tire pressure warning light.......2-10
Low windshield-washer fluid warning
light......................2-27
Passenger air bag and status light.....1-58
Seat belt warning light........1-19,2-12
Supplemental air bag warning light .1-67, 2-12
Vehicle security system...........2-30
Warning/indicator lights and audible
reminders.............2-8,2-9,2-13
Warning labels (for SRS)..........1-67
Warning/indicator lights and audible
reminders...............2-8, 2-9, 2-13
Audiblereminders.........2-8,2-9,2-13
Indicatorlights...........2-8,2-9,2-13
Warning lights...........2-8,2-9,2-13
Warning lights.............2-8,2-9,2-13
Warning systems switch............2-46
Washer switch
Rear window wiper and washer
switches...................2-35
Weights (See dimensions and weights).....9-9
Wheels and tires.................8-28
Wheel/tire size...................9-9
10-7