*See your Owner’s Manual for information.
1 ADAPTIVE FRONT LIGHTING SYSTEM
(AFS) SWITCH*
2 INSTRUMENT BRIGHTNESS
CONTROL SWITCHES*
3 VEHICLE INFORMATION DISPLAY*
4 TRIP RESET SWITCH*
5 TRIP COMPUTER SWITCHES
6 HEADLIGHT AND TURN SIGNAL SWITCH
7 PADDLE SHIFTERS
8 ASSIST CHARGE GAUGE
9 EV INDICATOR LIGHT
10 WIPER AND WASHER SWITCH
11 STEERING WHEEL SWITCHES FOR
AUDIO/BLUETOOTH®
12 INTELLIGENT CRUISE CONTROL
13 DYNAMIC DRIVER ASSISTANCE SWITCH*
14 VEHICLE DYNAMIC CONTROL (VDC)
OFF SWITCH*
15 BACK-UP COLLISION INTERVENTION (BCI)
SYSTEM OFF SWITCH*
16 WARNING SYSTEMS SWITCH
17 TILT/TELESCOPIC STEERING WHEEL SWITCH*
18 REAR SUNSHADE SWITCH*
19 HEATED STEERING WHEEL SWITCH*
20 TRUNK LID RELEASE SWITCH
21 HOOD RELEASE*
22 CONTROL PANEL DISPLAY SCREEN
23 HEATER AND AIR CONDITIONER (automatic)
24 AUDIO SYSTEM
25 CLIMATE-CONTROLLED SEAT SWITCH*
26 INFINITI DRIVE MODE SELECTOR
24
26
1
77
23
2525
141516
17
13
8
2
6
22
1211
Behind
steering wheel
Behind
steering wheel Behind
steering wheel
10
34
5
192018
21
9
1932612_16a_Q70_HEV_US_pQRG_091715.indd 49/17/15 10:43 AM
16 HIGH BEAM SELECT
With the headlights ON (either in the AUTO or
position), push the headlight control switch forward
4 to select the high beam function. The blue
indicator light
illuminates in the instrument
panel. Pull the headlight switch back to the original
position to select the low beam. The blue indicator
light will extinguish.
Pull and release the headlight control switch 5 to
flash the headlight high beams on and off.
FOG LIGHT SWITCH
The headlights must be on and the low beams
selected for the fog lights to operate.
Turn the switch (inside collar) to the position 6
to turn the fog lights on.
Turn the switch (inside collar) to the OFF position to
turn the fog lights off.
LANE CHANGE SIGNAL
Move the lever up or down until the turn signal begins to flash, but the\
lever does not
latch, to signal a lane change. Hold the lever until the lane change is \
completed.
Move the lever up or down until the turn signal begins to flash, but the\
lever does not
latch, and release the lever. The turn signal will automatically flash t\
hree times.
Choose the appropriate method to signal a lane change based on road and \
traffic conditions.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
4
5
6
Wiper and Washer Switch
Move the lever to one of the following positions to
operate the windshield wipers:
1 Mist (MIST) – One sweep operation of
the wipers.
2 Auto (AUTO) – Operates the rain-sensing wipers
intermittently. To increase or decrease wiper
sensitivity, twist the control ring
3 .
4 Low (LO) – Wipers operate at a continuous
low-speed.
5 High (HI) – Wipers operate at a continuous
high-speed.
6 Pull the lever toward you to activate the washer. The wipers will operat\
e several times.
MIST
OFF
AUTO
LO
HI
2
4
5
13
6
first drive features
1932612_16a_Q70_HEV_US_pQRG_091715.indd 169/17/15 10:45 AM
