Page 19 of 308
Starting the System for the First Time I 1-9
01
Starting the System for the
First Time
Turning the System On/Off
Press the engine start button or set the
ignition key to On or ACC. Each time you
turn on the system, a boot logo and safety
warning will appear.
Pressing the power key on the head unit
will display the user agreement screen. To
change the system language between
English, French, Spanish and Korean
press the Change
Language button.
NOTICE
Cannot operate the system while it is booting
up
. It may take some time for all of features of
the system, particularly the voice recognition
system, to be ready for use.
Pressing and holding the power key on the
head unit will turn off the system.
You can change Screen Saver Settings in
Setup to display a clock or another chosen
image on the Screen Saver.
i Information
If you turn off the system during a phone call
using the Hands-free f
eature, then the call will
automatically switch to your mobile phone.
NOTICE
Check the volume when turning on the
system.
Before turning on the system, adjust
the volume to a reasonable level.
System Reset
The System Reset function restores the
system when it is not operating correctly.
Press and hold the RESET
k
ey for a sec-
ond or longer. (It is recommended that you
press the RESET
key using a tool, such as
a pin or a clip.)
NOTICE
Resetting the system restores all existing
settings and configur
ations (e.g. volume,
display, etc.) back to their factory defaults.
) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E ) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E
Page 69 of 308
Before Using the Bluetooth Õ Handsfree I 3-3
03
CAUTIONS upon Connecting
Bluetooth® Phone
!Ÿ
Before connecting the head unit with
the mobile phone, check to see that the
mobile phone supports Bluetooth
® fea-
tures
!Ÿ
Even if the phone supports
Bluetooth®
Wireless Technology, the phone will
not be found during device searches if
the phone has been set to hidden state
or the Bluetooth
® power is turned off.
Disable the hidden state or turn on the
Bluetooth
® power prior to searching/
connecting with the head unit.
!Ÿ
If Auto Connection is used, the
Bluetooth
® phone is automatically con-
nected when the ignition is turned on,
making it unnecessary to have to con-
nect the phone with the head unit every
time.
!Ÿ
If you do not want automatic connection
with your Bluetooth
® device, turn the
Bluetooth® feature off of the Bluetooth®
device.
!Ÿ
Park the vehicle when connecting the
head unit with the mobile phone.
!Ÿ
Bluetooth
® connection may become
intermittently disconnected in some
mobile phones. Follow these steps to
try again.
1. Turn the Bluetooth
® function within
the mobile phone OFF/ON and try
again.
2. Turn the mobile phone power OFF/
ON and try again.
3. Completely remove the mobile
phone battery, reboot, and then
again.
4. Reboot the Multimedia System and
try again.
5. Delete all paired devices from both
of Phone and Head Unit sides and
then try again
!Ÿ
The Handsfree call volume and quality
may differ depending on the mobile
phone.
!Ÿ
Pairing Bluetooth
® devices and use of
other Bluetooth® features are not sup-
ported when the vehicle is in motion. For
safety, please first park your vehicle.
!Ÿ
When downloading contacts, is not
functioning and is not described within
this user’s manual it may be related with
the mobile device. When that occurs,
inquire within the mobile phone manu-
facturer.
) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E ) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E
Page 180 of 308
8-2 I Other Features
Camera
About Rear Detection Camera
!Ÿ
This device is connected to a rear
detection camera to see behind the car
when reversing.
!Ÿ
When the engine starts, shift the gear to
R to activate the rear detection camera.
!Ÿ
Shift the gear to another position to
deactivate the rear detection camera.
i Information
• While the device boots up, shift the gear to R
to activ
ate the rear detection camera.
A separate chipset is used for the camera
screen while booting up
, so it may be different
after booting up.
When booted up, blinking may occur when
y
ou switch to a UI screen.
CAUTION
A wide-angle lens is installed as the rear
detection camer
a to get a wider view, so
there may be some difference between the
actual distance and the distance that appears
on-screen. For safety, make sure to view
the back, right, and left sides of the car for
yourself.
) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E ) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E
Page 191 of 308
Setup I 9-11
09
System Info
At the System Info screen, software ver-
sion information, updates, and storage
status details are available.
FeaturesDescription
SW InfoSystem version informa-
tion and update details are
available.
Select the Update button
to update the system. After
update is complete, the
system will reboot auto-
matically
.
Storage Space Displays the memory space
available for media files
and applications.
System Update
At the System Info screen, insert the
updated memory (USB or SD card) with
the latest file downloaded, and then select
the
Update button to begin updating. The
system will then reboot automatically.
i Information
This product needs supplemented software
updates
, additional new functions, and
renewed maps, which collectively may take
some time to complete, depending on the
amount of data.
CAUTION
If the power is disconnected or the USB or
SD card is remo
ved during an update, the
data might be damaged. Please wait until the
update is complete while the engine is on.
) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E ) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E
