2016 Hyundai Sonata Hybrid USB
[x] Cancel search: USBPage 54 of 308
2-30 I AV
iPod
Using iPod Devices
!Ÿ
iPod is a registered trademark of Apple Inc.
!Ÿ
iPod mode will not operate if the con-
nected iPod cannot be recognized due
to operation of unsupported versions
that do not support related protocols,
iPod abnormalities, or iPod device
defects. Some iPods with unsupported
communication protocols may not prop-
erly operate with the Multimedia system.
!Ÿ
For fifth generation iPod Nano devices,
the iPod may not be recognized when
the battery level is low. Please charge
the iPod for use.
!Ÿ
Search/play orders shown within the
iPod device may differ with the orders
shown within the Multimedia system.
!Ÿ
If the iPod malfunctions due to an iPod
device defect, reset the iPod and try
again. (To learn more, refer to your iPod
manual)
!Ÿ
If repeatedly connect and disconnect
iPod/iPhone to the Multimedia system
with USB cable in short time, it may
cause abnormal operation.
!Ÿ
The time for recognition of iPod/iPhone
may vary depending on device type,
firmware version and iOS version.
!Ÿ
For some iPod Touch and iPhone
devices, connecting Bluetooth
® while the
iPod is operating may result in discon-
tinued iPod sound. When such devices
with Bluetooth
® support are connected,
this problem occurs as the sound source
is changed from the Dock Connector
(USB connector cable) to Bluetooth.
!Ÿ
To prevent this symptom, Bluetooth
Audio function in the Multimedia system
is limited if iPod/iPhone is connected
to the system through both cable and
Bluetooth. To listen to the iPod sound,
use either iPod menu with USB connec-
tion or Bluetooth Audio with Bluetooth
connection.
!Ÿ
To listen to the iPod sound, reconnect
the USB cable or change the audio out-
put settings in iPod/iPhone to Dock.
!Ÿ
In order to use the iPod while operating
the keys, you must use a dedicated iPod
cable. (the cable that is supplied when
purchasing iPod/ iPhone products)
œ During ACC ON state, connecting the
iPod through the iPod cable (The cable
that is supplied when purchasing iPod/
iPhone product.) will charge the iPod
through the head unit.
œ
The use of genuine iPod cables sup- The use of genuine iPod cables sup-
plied by Apple is recommended. (The plied by Apple is recommended. (The
use of other products may result in use of other products may result in
noise or abnormal operation.)noise or abnormal operation.)
) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E ) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E
Page 57 of 308
iPod I 2-33
02
Caution
!Ÿ
If the iPhone/iPod Touch supports
Bluetooth, it is unable to use Bluetooth
Audio if the Apple device that is con-
nected to the Multimedia system
through both USB connection and
Bluetooth. Disconnect the USB connec-
tion then use Bluetooth Audio
!Ÿ
If iPod/iPhone connected to the
Multimedia system through both USB
and AUX. iPod/iPhone keeps output
sound via AUX, thus it may occur sound
will not output in iPod mode.
!Ÿ
If AUX cable connected to iPod/iPhone
but not connect to the Multimedia sys-
tem, it may occur sound will not output
in iPod mode due to iPod/iPhone’s fea-
ture. Especially, if you use AUX cable
like pictures, this problem may occur.
!Ÿ
Disconnect AUX cable from iPod/iPhone
first, then connect to the Multimedia
system via USB. Or change settings to
“Dock” in iPod/iPhone.
!Ÿ
If connect to the Multimedia system
while podcast or iTunes music down-
loading to iPod/iPhone, it may occur
some problems when you select song
in the list. Reconnect iPod/iPhone to the
Multimedia system when downloading
is finished or the file deleted.
!Ÿ
If connect to the Multimedia system
while sync, it may occur some problems.
Try to use iPod/iPhone connection after
sync complete. (To learn more, refer to
your iPod manual)
!Ÿ
iPhone and iPod Touch devices are
guaranteed to work normally on iOS
7.0.6 or below. However, they may not
work normally on future iOS versions
as their operations have not yet been
tested.
) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E ) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E
Page 136 of 308
6-2 I Voice Recognition
What is Voice Recognition?
Voice recognition technology runs the sys-
tem as ordered by recognizing your voice
command for operation of the multimedia
while y
ou are driving the car.
Regretfully, not all possible voice com-
mands are recognized by the system due
to technological limitations. To make up for
these limitations, the system displays the
voice commands that are available for you
to use.
There are errors in communication between
people. Likewise, voice recognition some-
times misunderstands your voice command
in some circumstances. If this happens,
either check the screen for the available
options and say the command again, or
manually select and press the button for the
corresponding command on the screen.
Precautions Required
for Successful Voice
Recognition
1. Voice recognition supports only the
commands that are displayed on the
screen and written in the User's Guide.
2. To ensure the correct recognition and
execution of your command, say your
command when you hear the beep after
a voice prompt.
3. Voice recognition automatically ends if:
1) A call is incoming or outgoing
2) A media (USB or iPod, etc.) is con-
nected or disconnected
3) The front or rear view camera is
operated (optional)
4) The car engine starts or stops
5) A system key, such as
RADIO key
or
MEDIA key is selected
6) An emergency occurs, for example
re-searching for the route after the
navigation route has been lost 4.
The microphone that recognizes your
voice is located over the head part in
the driver's seat. To make your com-
mands better understood, keep your
body straight in the driver's seat when
speaking the command.
5. Speaking naturally and clearly will
ensure better recognition of your voice
commands.
6. In the following cases voice recognition
will be affected by ambient noise.
1) The sound of the wind if any win-
dow or the sun roof is open.
2) High speed blower from the air
v
ents. Set climate control to blow
lower than level 3.
3)
Vibrations from passing through a
tunnel.
4) Vibrations from driving on an
uneven road.
5) Storms and heavy rain.
Voice Recognition
) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E ) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E
Page 146 of 308
6-12 I Voice Recognition
Media Commands
* Check the following before you use media commands.
1.
If no media is connected or if no playable files exist at the time when you use these commands, a voice message will tell you
that this is not available.
2. If you say the name of the media that is currently playing again, then that media will continue playing.
e.g.) Saying “USB” while USB content is playing.
Command Operation
"J Music Continues the last media you played.
"J iPod Plays the iPod currently connected. This
will work the same when an iPhone is con-
nected. If a USB is connected, then it will
be played instead of the iPod.
"J USB Plays the music on the USB currently con-
nected.
If an iPod is connected, then the iPod will
be played instead of the USB.
"J Bluetooth Audio Plays the music on the Bluetooth phone
currently connected.
This may not be supported depending on
the Bluetooth connection status.
"J AUX Plays external devices that are currently
connected.
"J My Music Plays My Music files stored in the system.
"J Pandora Radio Plays Pandora Radio that is currently con-
nected.
) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E ) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E
Page 147 of 308
Voice Commands I 6-13
06
1. Audio CD Command
CommandOperation
!¹ Play Plays a paused track.
Maintains the current settings during playback.
!¹ Pause Pauses a track that is currently playing.
Maintains current settings while paused during
playback.
!¹ Track
<1~99> Plays a desired track number.
!¹ Shuffle Plays tracks or files randomly.
Maintains current settings during shuffled play-
back.
!¹ Shuffle Off Cancels Shuffle and plays tracks sequentially.
Maintains current settings during sequential
playback.
!¹ Repeat Plays the current track repeatedly.
Maintains the current settings during repeat play-
back.
!¹ Repeat Off Cancels Repeat and plays multiple tracks or
files.
Maintains current settings during multiple track
playback.
2. MP3 CD / USB Music / iPod / My Music Command
Command
Operation
!¹ Play Plays a selected file.
Maintains the current settings during playback.
!¹ Pause Pauses a file that is playing.
Maintains current settings while paused during
playback.
!¹ Shuffle Plays tracks or files randomly.
Maintains current settings during shuffled play-
back.
!¹ Shuffle Off Cancels Shuffle and plays tracks sequentially.
Maintains current settings during sequential
playback.
!¹ Repeat Plays the current track or file repeatedly.
Maintains the current settings during repeat play-
back.
!¹ Repeat Off Cancels Repeat and plays multiple tracks or
files.
Maintains current settings during multiple track
playback.
) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E ) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E
Page 166 of 308
7-10 I Info
SoundHound
SoundHound is a music search engine. It enables users to identify
music by playing or singing a song. It is also possible to search by
typing the name of the artist, song, album or lyrics.
Accessing SoundHound
1. From the Home screen, select All Menus, My Menu or Apps
then select SoundHound
button.
2. Select SoundHound
button on Radio modes (AM, FM and
SiriusXM) or Media modes (CD, Bluetooth Audio, iPod, USB,
My Music and AUX).
SoundHound Main Screen
Name Description
ModeDisplays current operating mode.
Back button Goes back to previous mode.
What’s that
Song? Starts the song recognition process. After this
process is complete, it goes to Song screen.
Search Goes to Search screen.
History Goes to History screen.
Favorites Goes to Favorites screen.
Charts Goes to Charts screen.
) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E ) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E
Page 191 of 308
Setup I 9-11
09
System Info
At the System Info screen, software ver-
sion information, updates, and storage
status details are available.
FeaturesDescription
SW InfoSystem version informa-
tion and update details are
available.
Select the Update button
to update the system. After
update is complete, the
system will reboot auto-
matically
.
Storage Space Displays the memory space
available for media files
and applications.
System Update
At the System Info screen, insert the
updated memory (USB or SD card) with
the latest file downloaded, and then select
the
Update button to begin updating. The
system will then reboot automatically.
i Information
This product needs supplemented software
updates
, additional new functions, and
renewed maps, which collectively may take
some time to complete, depending on the
amount of data.
CAUTION
If the power is disconnected or the USB or
SD card is remo
ved during an update, the
data might be damaged. Please wait until the
update is complete while the engine is on.
) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E ) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E
Page 196 of 308
10-4 I Appendix
Troubleshooting
1. Errors which occur during the operation or installation of the
device may be mistaken as a malfunction of the actual device.
2. If you are having problems with the device, try the suggestions
listed below.
3. If the problems persist, contact your Hyundai dealer.
ProblemPossible Cause
There are small red,
blue, or green dots on
the screen
!Ÿ
Because the LCD is manufactured with
technology requiring high point density,
a pixel or lighting deficiency may occur
within 0.01% of total pixels
The sound or image is
not working
!Ÿ
Has the Switch for the vehicle been turned
to [ACC] or [ON]?
!Ÿ
Has the SYSTEM been turned OFF?
The screen is being dis-
played but sound is not
working
!Ÿ
Has the volume been set to a low level?
!Ÿ
Has the volume been muted?
When the power is
turned on, the corners of
the screen are dark
!Ÿ
The display appearing somewhat dark
after prolonged periods of use is normal
with LCD panels. It is not a malfunction
!Ÿ
If the screen is very dark, contact your
nearest Hyundai dealer for assistance
Sound is w
orking from
only one speaker
!Ÿ
Are the positions of Fader or Balance
sound controls adjusted to only one side?
Problem Possible Cause
Sound does not work in
AUX mode
!Ÿ
Are the audio connector jacks fully
inserted into the AUX terminal?
The external device is
not working
!Ÿ
Is the external device connected with a
standard connector cable?
Upon turning power on,
the most recent mode
screen is not displayed Within modes that play files by reading
external sources, such as discs, USB, iPod,
or Bluetooth
® streaming mode, the most
recently played mode screen prior to turning
off power may not properly load
!Ÿ
If there is no disc or the corresponding
device is not connected, the mode oper-
ated prior to the most recent mode will
operate
!Ÿ
If the previous mode still cannot be prop-
erly played, the mode operated prior to
that will operate
) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E ) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E