2016 Hyundai Sonata Hybrid light

10-2 I Appendix
Product Specification
TFT-LCD
Screen Size Navigation Device - 8 inch(176.4 x 99.36mm)
ResolutionNavigation Device - 384,000 pixels
(Resolution: 800 x 480)
Operating
Method TFT(Thin Film Transistor) Active Matrix
Viewing Angle Left/Right, Top/Bottom : ALL 89 Š

Internal
Lighting LED
Radio
Channels FM : 87.5 MHz ~ 107.9 MHz(Step : 200 kHz)
AM : 530 kHz ~ 1710 kHz(Step : 10 kHz)
Sensitivity FM : Under 10dBu/AM : Under 35dBu
Distortion
Factor Within 2%
Common
Name Car TFT LCD Display Navigation Unit
Power Supply DC 14.4V Operating
PowerDC 9V ~ DC 16V
Current
Consumption 2.5A Sleep
Current0.5mA
(Head Unit Only)
Operating
Temperature -20 ~ +70

(-4 ~ +158
×
Storage
Temperature -40 ~ 85

(-40 ~ 185×

Dimensions 178 X 102 X138mm (Main BOX)
Weight 2.7kg
CDMA
FrequencyTX: 824MHz~849MHz(BC0), 850MHz~1910MHz(BC1)
RX: 869MHz~894MHz(BC0), 930MHz~1990MHz(BC1)
Sensitivity -104dBm under(FER=0.5% under)
Power 23.01~30dBm (BC0, BC1, conducted)
Appendix
)@-'&@(<64"@/>
1BSUJOEE


 )@-'&@(<64"@/>
1BSUJOEE


 

10-4 I Appendix
Troubleshooting
1. Errors which occur during the operation or installation of the
device may be mistaken as a malfunction of the actual device.
2. If you are having problems with the device, try the suggestions
listed below.
3. If the problems persist, contact your Hyundai dealer.
ProblemPossible Cause
There are small red,
blue, or green dots on
the screen
!Ÿ
Because the LCD is manufactured with
technology requiring high point density,
a pixel or lighting deficiency may occur
within 0.01% of total pixels
The sound or image is
not working
!Ÿ
Has the Switch for the vehicle been turned
to [ACC] or [ON]?

!Ÿ
Has the SYSTEM been turned OFF?
The screen is being dis-
played but sound is not
working
!Ÿ
Has the volume been set to a low level?

!Ÿ
Has the volume been muted?
When the power is
turned on, the corners of
the screen are dark
!Ÿ
The display appearing somewhat dark
after prolonged periods of use is normal
with LCD panels. It is not a malfunction

!Ÿ
If the screen is very dark, contact your
nearest Hyundai dealer for assistance
Sound is w

orking from
only one speaker
!Ÿ
Are the positions of Fader or Balance
sound controls adjusted to only one side?
Problem Possible Cause
Sound does not work in
AUX mode
!Ÿ
Are the audio connector jacks fully
inserted into the AUX terminal?
The external device is
not working
!Ÿ
Is the external device connected with a
standard connector cable?
Upon turning power on,
the most recent mode
screen is not displayed Within modes that play files by reading
external sources, such as discs, USB, iPod,
or Bluetooth
® streaming mode, the most
recently played mode screen prior to turning
off power may not properly load
!Ÿ
If there is no disc or the corresponding
device is not connected, the mode oper-
ated prior to the most recent mode will
operate

!Ÿ
If the previous mode still cannot be prop-
erly played, the mode operated prior to
that will operate
)@-'&@(<64"@/>
1BSUJOEE


 )@-'&@(<64"@/>
1BSUJOEE


 

6
Learn how to touch the screen to
operate the system.
Select
Tap lightly on a menu or an item to
select it.
NOTICE
The system will not recognize your
touch if y
ou wear a glove or other non-
conductive material. Touch the screen
using your finger, an electrostatic
touch-screen glove, or a stylus pen.
Drag & Drop
Select a menu or item you want,
then drag and drop it to where you
want to place it.
Drag or touch the slider along the
play bar in the music screens to
jump to the point that you want to
play from. However, the CD player
does not support drag function.
i Information
Music screens for Disc CD and Disc
MP3 do not suppor
t this function.
Drag the frequency bar to the left or
right to move to the frequency that
you want.
From the My Menu Settings screen,
drag and drop icons to add, delete,
or move to from My Menu.
Flick (Quick Scrolling)
Quickly moves up and down in the
list.
NOTICE
Moving the list when there are many
items will displa
y a handler on the right
of the display. You can easily move
many items at a time with the handler
On-Screen Touch Controls
)@-'&@(<64"@/>
23(JOEE


 <64"@/>
23(JOEE


 


ß
1
 

66
Press the Using Map button to
select the distance ahead to avoid.
(Highlighted grey indicates distance
to avoid)
Navigation Volume
Press the Navi Volume button to
adjust the volume.
Press the Navi Volume button.
Nearby POIs
Display nearby POIs on the map.
View Nearby POIs
Select the Menu on the bottom of
the left screen ▶
Select the
POI
button.
Press ON, OFF button to set
whether to show nearby POIs or not.
When categories are selected, they
will appear on the map. (ex. Gas sta-
tion)
Name Description
Reduce the length of the
section to avoid.
Increase the length of the
section to avoid.

Confirm detour
Name Description
Set the volume to mute.
Turn the volume down
Turn the volume up
Slide to set the volume
Navigation
)@-'&@(<64"@/>
23(JOEE


 <64"@/>
23(JOEE


 


ß
1