Page 137 of 308
Starting/Ending and Setting Voice Recognition I 6-3
06
Starting/Ending and Setting
Voice Recognition
Starting Voice Recognition
Press the key briefly (less than 0.8
seconds) on the steering wheel control to
activate voice recognition.
Ending Voice Recognition
1. Select “Exit” to the left of the bottom to end voice recognition.
2. Press and hold (over 0.8 seconds) the
key on the steering wheel con-
trol to end voice recognition.
Quick Run of Voice
Recognition (Manual Mode)
Usually, you are supposed to say a com-
mand to execute the desired operation
after the voice guidance. However, it takes
a little time to wait for the voice guidance.
If you would like to activate the desired
operation more quickly, you can just touch
the commands displayed on the screen.
This feature is useful when you feel the
voice guidance is too long or voice com-
mands do not work as you desired.
) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E ) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E
Page 156 of 308
6-22 I Voice Recognition
Siri Eyes Free
How to start Siri
If you want to use Siri, you have to con-
nect your iOS device to Multimedia system
through Bluetooth.
(Please check whether your iOS device
supports Siri and turning Siri On)
Then you can use Siri while pressing and
holding
key on the steering wheel.
How to use Siri
When you access the Siri screen while
pressing and holding
key on the
steering wheel, you can press
Speak but-
ton and then you can speak what you
want. Please see the Multimedia system
only supports “Phone” related functions.
Other functions will be performed in your
iOS device. If you press voice key quickly,
Siri would re-start. If you hold down voice
key, Siri would be terminated and the
screen would go back to the previous
screen. Eyes-Free mode would be acti-
vated automatically while you are driving.
When shifting gears into P or putting the
Parking break on, Eyes-Free mode would
be deactivated automatically.
i Information
Functions and feedbacks from voice
commands via Sir
i are executed in iOS
device. If iOS version changed, functions and
feedbacks can be changed according to iOS
device.
) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E ) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E
Page 201 of 308
Index I 10-9
10
A
About Bluetooth® Wireless Technology/
Head Unit Use Environment …………10-8
About Disc ……………………………2-11
About Making/Answering Phone
Calls ……………………………………10-8
About Pairing Mobile Phones …………10-7
About Rear Detection Camera ……… 8-2
About Transmission and Reception of
Radio Waves ………………………… 4-3
Accept/Reject Call …………………… 3-7
Accessing FM/AM Mode …………… 2-2
Accessing Pandora Radio Mode …… 7-7
Accessing SiriusXM™ Data …………7-15
Accessing SoundHound ………………7-10
Address ………………………………5-15
Adjusting Voice Recognition Volume … 6-5
App List ………………………………7-13
Auto Connection Priority ……………… 9-5
AUX ……………………………………2-37
Avoid Street ……………………………5-34
B
Basic Features ………………………… 5-2
Basic Mode Screen ………… 2-16, 2-19
Basic Mode Screen (HD Radio™ reception
ON) …………………………………… 2-5
Battery Warning Message ……………1-10
Before Playing a USB MP3 ……………2-22
Before Playing an MP3 Disc …………2-14
Before Use …………………………… 4-3
Before Using the Bluetooth
® Handsfree 3-2
Blue Link Settings ……………… 4-7, 9-7
Blue Link Voice Local Search ………… 4-8
Blue Link
® Safety and Security Service … 4-5
Bluetooth Audio Mode …………………2-38
Bluetooth Connection Settings … 2-39, 9-4
Bluetooth Connection ………………… 3-4
Bluetooth Phone ……………………… 3-6
Bluetooth System Information………… 9-6
Bluetooth
® Audio ………………………2-38
C
Call Commands ……………………… 6-8
Call History …………………………… 3-9
Camera ……………………………… 8-2
Canceling Route ………………………5-31
CAUTIONS upon Connecting Bluetooth
®
Phone ………………………………… 3-3
CD ……………………………………2-16
Changing Map View ………………… 5-3
Clock Settings ………………………… 9-8
Component Names and Functions … 1-5
Connecting an External Device ………2-37
Connecting Bluetooth Devices ……… 3-4
Connecting with the Blue Link Center … 4-4
Contacts ………………………………3-10
D
Deleting Bluetooth Devices …………… 3-5
Detour ………………………………… 5-5
Dial …………………………………… 3-7
Direct Tune …………………………… 2-8
Disc/Content Format Compatibility ……2-12
Disconnecting Bluetooth Devices …… 3-5
Index
) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E ) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E
Page 256 of 308
36
Precautions Required
for Successful Voice
Recognition
1. Voice recognition supports only
the commands that are displayed
on the screen and written in the
User’s Guide.
2. To ensure the correct recognition
and execution of your command,
say your command when you hear
the beep after a voice prompt.
3. Voice recognition automatically
ends if:
1) A call is incoming or outgoing
2) A media (USB or iPod, etc.) is
connected or disconnected
3) The front or rear view camera
is operated (optional)
4) The car engine starts or stops
5) A system key, such as
RADIO key or MEDIA key is
selected
6) An emergency occurs, for
example re-searching for the
route after the navigation
route has been lost 4.
The microphone that recognizes
your voice is located over the
head part in the driver’s seat.
To make your commands bet-
ter understood, keep your body
straight in the driver’s seat when
speaking the command.
5. Speaking naturally and clearly will
ensure better recognition of your
voice commands.
6. In the following cases voice rec-
ognition will be affected by ambi-
ent noise.
1) The sound of the wind if any
window or the sun roof is
open.
2) High speed blower from the
air v
ents. Set climate control
to blow lower than level 3.
3)
Vibrations from passing
through a tunnel.
4) Vibrations from driving on an
uneven road.
5) Storms and heavy rain.
Voice Recognition
) @ - ' & @ ( < 6 4 " @ / > 2 3 ( J O E E < 6 4 " @ / > 2 3 ( J O E E ß
1
Page 258 of 308
38
Skipping Prompt
Messages
When you hear the prompt mes-
sage, the voice recognition icon on
the steering wheel remote control
to skip the message and go directly
to listening mode to say your com-
mand.
This results in f
aster operation when
you feel the message is too long or
you already know the command to
use.
Quick Run of
Voice Recognition
(Manual Mode)
Usually, you are supposed to say
a command to execute the desired
operation after the voice guidance.
However, it takes a little time to wait
for the voice guidance. If you would
like to activate the desired operation
more quickly, you can just touch the
commands displayed on the screen.
This feature is useful when you feel
the voice guidance is too long or
voice commands do not work as you
desired.
Voice Recognition
) @ - ' & @ ( < 6 4 " @ / > 2 3 ( J O E E < 6 4 " @ / > 2 3 ( J O E E ß
1
Page 268 of 308
48
Siri Eyes Free
How to start Siri
If you want to use Siri, you have
to connect your iOS device to
Multimedia system through
Bluetooth.
(Please check whether your iOS
device supports Siri and turning Siri
On)
Then you can use Siri while pressing
and holding
key on the
steering wheel.
How to use Siri
When you access the Siri screen
while pressing and holding
key on the steering wheel, you can
press
Speak button and then you
can speak what you want. Please
see the Multimedia system only sup-
ports “Phone” related functions.
Other functions will be performed in
your iOS device. If you press voice
key quickly, Siri would re-start. If you
hold down voice key, Siri would be
terminated and the screen would go
back to the previous screen. Eyes-
Free mode would be activated auto-
matically while you are driving. When
shifting gears into P or putting the
Parking break on, Eyes-Free mode
would be deactivated automatically.
i Information
Functions and feedbacks from voice
commands via Sir
i are executed in
iOS device. If iOS version changed,
functions and feedbacks can be
changed according to iOS device.
Voice Recognition
) @ - ' & @ ( < 6 4 " @ / > 2 3 ( J O E E < 6 4 " @ / > 2 3 ( J O E E ß
1
