Page 98 of 308
5-12 I Navigation
Traffi c Pop-up
Press the Menu button on the bottom left
of the screen. ▶
Select the
Traffic button.
If there is “red traffic flow” on the route, a
traffic information pop-up is displayed.
On the traffic information popup window,
brief information is displayed and Details
and Detour can be selected.
If you do not want to pop up anything on
the current route, select Do not show for
this route.
On the traffic information pop-up, select
detour or details to perform action.
Press Detour to change the route.
Name Description
Pop-up Icon
Symbol of traffic event
Road Name / Road Number
Distance from current location
Estimated delay time
Search detour route
View the detailed information
regarding traffic event
Close the pop-up message
Set not to display pop-up on the
current route. (Maintained until
the destination is reset)
) @ - ' . : @ ( < 6 4 " @ / > 1 B S U J O E E ) @ - ' . : @ ( < 6 4 " @ / > 1 B S U J O E E
Page 100 of 308
5-14 I Navigation
Search
Places
You can enter POI Name, Address, or
Coordinates that you wish to search by.
Press the
NAVI head unit key. Ü
Select the
Destination tab. Ü
Select the
search bar.
Enter the POI Name, Address and
Coordinates of the location you want in
the input window above, and press the
Done button.
If you select a location from the search
result list, it will bring you to the point.
If you press the All Cities in MI button on the
search result screen, it will bring you to the
City search screen where you can filter the
search results by city names.
If you press the All Categories button from
the search result screen, it will bring you to
the POI Categories screen where you can
filter the search results by POI Categories.
) @ - ' . : @ ( < 6 4 " @ / > 1 B S U J O E E ) @ - ' . : @ ( < 6 4 " @ / > 1 B S U J O E E
Page 248 of 308
36
Precautions Required
for Successful Voice
Recognition
1. Voice recognition supports only
the commands that are displayed
on the screen and written in the
User’s Guide.
2. To ensure the correct recognition
and execution of your command,
say your command when you hear
the beep after a voice prompt.
3. Voice recognition automatically
ends if:
1) A call is incoming or outgoing
2) A media (USB or iPod, etc.) is
connected or disconnected
3) The front or rear view camera
is operated (optional)
4) The car engine starts or stops
5) A system key, such as
RADIO key or MEDIA key is
selected
6) An emergency occurs, for
example re-searching for the
route after the navigation
route has been lost 4.
The microphone that recognizes
your voice is located over the
head part in the driver’s seat.
To make your commands bet-
ter understood, keep your body
straight in the driver’s seat when
speaking the command.
5. Speaking naturally and clearly will
ensure better recognition of your
voice commands.
6. In the following cases voice rec-
ognition will be affected by ambi-
ent noise.
1) The sound of the wind if any
window or the sun roof is
open.
2) High speed blower from the
air vents .
Set climate control
to blow lower than level 3.
3) Vibrations from passing
through a tunnel.
4) Vibrations from driving on an
uneven road.
5) Storms and heavy rain.
Voice Recognition
) @ - ' . : @ ( < 6 4 " @ / > 2 3 ( J O E E . : @ ( < 6 4 " @ / > 2 3 ( J O E E ß
y
Page 282 of 308
70
Search
Places
You can enter POI Name, Address, or
Coordinates that you wish to search by.
Press the
NAVI head unit key. Ü
Select the
Destination tab. Ü
Select
the
search bar.
Enter the POI Name, Address and
Coordinates of the location you
want in the input window above, and
press the
Done button.
If you select a location from the
search result list, it will bring you to
the point. point.
If you press the All Cities in MI button
on the search result screen, it will bring
you to the City search screen where
you can filter the search results by city
names.
If you press the All Categories but-
ton from the search result screen, it
will bring you to the POI Categories
screen where you can filter the
search results by POI Categories.
It will bring you from the search result
screen to the screen of the point
where you can set a destination or a
waypoint, or register the current posi-
tion to the address book.
Navigation
) @ - ' . : @ ( < 6 4 " @ / > 2 3 ( J O E E . : @ ( < 6 4 " @ / > 2 3 ( J O E E ß
y
