2016 Hyundai Santa Fe Sport buttons

FEATURES AND CONTROLS
SANTA FE
11 10
HYUNDAI
HOMELINK WIRELESS CONTROL SYSTEM
Home Link
Standard Programming To train most devices, follow these instructions:
1. For first-time programming, press and hold the two outside buttons,
HomeLink
® Channel 1 and Channel 3 Buttons, until the indicator light
begins to flash (after 20 seconds). Release both buttons. Do not hold
the buttons for longer than 30 seconds.
2. Position the end of your hand-held transmitter 1-3 inches (2-8 cm)
away from the HomeLink
® buttons while keeping the indicator light
in view.
3. Simultaneously press and hold both the HomeLink
® and hand-held
transmitter button. DO NOT release the buttons until step 4 has
been completed.
4. While continuing to hold the buttons the red indicator Status LED
will flash slowly and then rapidly after HomeLink
® successfully trains
to the frequency signal from the hand-held transmitter. Release both
buttons.
For detail instructions, refer to your Owner’s Manual or visit
www.homelink.com.
INTERIOR LIGHTS
Push the lens
to turn the
map lamp on or off.
ON Map lamp and room lamp will turn on.OFF The lights stay off at all times,
even if a door is opened.DOOR Map lamp and room lamp
comes on when a door is opened.
Press the switch to turn the light
on or off.
Map lampRoom lamp

FEATURES AND CONTROLS
SANTA FE
17 16
HYUNDAI
AIR INTAKE CONTROL DEFROSTING / DEFOGGING
2. Set the temperature
control towards
warmer setting.3. Set the fan speed to
the highest setting.1. Press the front
windshield defrost
button.
Press to activate/deactivate the
rear window and side mirrors
defroster.REAR WINDOW AND SIDE
MIRRORS DEFROSTER
Changing the direction of
the air flow as follows:MODE SELECTION
Face levelBi-LevelFloor levelFloor/Defrost LevelDefrost Level

MAX A/C (Max air conditioning) button
A/C (Air conditioning) button
Mode selection buttons
Fan speed control knob
Rear window defrost button Front windshield defrost button Temperature control button Air intake control button
NOTETo reduce tendency of the glass
fogging and also to improve visibility,
keep the interior surface of the
windshield clean by wiping it with
a clean cloth and glass cleaner.
In addition, select air intake control
to the outside (fresh) air position
whenever possible while operating
the vehicle.
Outside (fresh) air positionRecirculated air position
Manual Climate Control

FEATURES AND CONTROLS
SANTA FE
19 18
HYUNDAI
Press the DUAL button to
operate the driver and passenger
side temperature individually.DUAL BUTTON
DEFROSTING / DEFOGGING
3. Set the fan speed to
the highest setting. 2. Set the temperature
control towards
warmer setting.1. Press the front
windshield defrost
button.
SYSTEM OFF MODEPressing the OFF button will place the system in the off mode.r Front blower will turn off.r Outside (fresh) air position
selected.r Vented air at last set temperature.
Press to activate /
deactivate
the rear defroster.
REAR WINDOW DEFROSTER AUTOMATIC HEATING
AND COOLING
2. Set the driver's
temperature control
to the desired setting. 1. Press the AUTO
button.
The modes, fan speeds, air
intake, and air-conditioning will be
controlled automatically according
to the temperature setting.
Changing the
direction of the
air flow as follows:
MODE SELECTION
Floor &
Defrost
Face
Level
Bi-
Level
Floor
Level
Automatic Climate Control
Type AAutomatic Climate Control
Type B
AIR INTAKE CONTROL
Recirculated air positionOutside (fresh) air position
%6"-
%6"-
Type B Type B Type A Type A

Air conditioning button Driver’s temperature
control button Mode selection button
Air intake control buttons Front windshield defrost button Fan speed control knob AUTO (automatic control) button
OFF button Rear window defrost button
Dual temperature control
selection button
Passenger’s temperature
control button Climate control information
screen selection button
NOTETo reduce tendency of the glass
fogging and also improve visibility,
keep the interior surface of the
windshield clean by wiping it with
a clean cloth and glass cleaner.
In addition, select air intake control
to the outside (fresh) air position
whenever possible while operating
the vehicle.
The auto deffogging system automatically controls moisture
of inside the windshield. To enable or disable the system,
press the front defroster button 4 times within 2 seconds
while pressing the AUTO button.
AUTO DEFOGGING SYSTEM

MULTIMEDIA
SANTA FE
29 28
HYUNDAI
AUDIO Press POWER button
to turn radio on.
r
TUNING / LISTENING TO CHANNELS
1. Press the Radio
button.
2 . Turn the TUNE/ENTER
knob to select the desired channel and press the knob.


NOTE
A clear view of the southern sky helps ensure XM
® radio reception.
r SETTING PRESET MEMORY BUTTONS (FM/AM/XM
®)
Press and hold any preset button (1-6)
until an audible beep is heard to
store current channel.
r ADJUSTING THE SOUND CONTROL
1. Press the SETUP
button.


4FMFDU
i4PVOE
4FUUJOHTu
CZ
UVSOJOH
BOE
QSFTTJOH
UIF
56/&&/5&3

knob.


4FMFDU
i#BTT
u
i.JEEMF
u
i5SFCMF
u
i'BEFS
u
PS
i#BMBODFu
CZ
UVSOJOH
BOE



pressing the TUNE/ENTER
knob.
4. Adjust the sound by turning and pressing the TUNE/ENTER
knob.
Please refer to your Owner’s Manual for more detailed information on how to use your audio system.
Complimentary XM subscription ends three months following the vehicle date of sale.
Please contact XM Radio at 1-800-XM-RADIO (1-800-967-2346) to renew your XM subscription.Type A Type B
Audio mode Press POWER button
to turn radio on.
t TUNING/LISTENING TO CHANNELS
1. Press FM/AM
or SAT
button of XM
®.
2. Press the TUNE
button to desired channel.
NOTE A clear view of the southern sky helps ensure XM
® radio reception.
t
SETTING PRESET MEMORY BUTTONS (FM/AM/XM
® )
Press and hold any preset button (1-6)
on the screen until
an audible beep is heard to store current channel.
t
ADJUSTING THE SOUND CONTROL
1. Press the SETUP
button and press the SOUND
button to display the Sound Settings screen.
2. Touch on-screen arrows to adjust desired setting.
t
SELECTING TRACK THROUGH SEARCH (CD MODE)
Press the TUNE
button to search tracks.
Once the desired track name is displayed, press the ENTER button.
NAVIGATION
AUX, USB, AND iPod
® PORT
Use the jack to
connect an external
audio device and listen
to it through the audio
system speakers in
your vehicle.