2016 Hyundai H-1 (Grand Starex) warning

[x] Cancel search: warning

Page 86 of 417

Hyundai H-1 (Grand Starex) 2016  Owners Manual Features of your vehicle
14 4
D070100ATQ
Opening the tailgate
• The tailgate is locked or unlocked
when all doors are locked or unlocked
with the key, transmitter or central door
lock switch. (if eq

Page 87 of 417

Hyundai H-1 (Grand Starex) 2016  Owners Manual 415
Features of your vehicle
4. After use, before closing the tail gate,
pull out the pin from the pin hole.
5. Align the checker arm hole and the tail
gate bracket hole, and insert the pin
into the b

Page 88 of 417

Hyundai H-1 (Grand Starex) 2016  Owners Manual Features of your vehicle
16 4
D070300AEN
Emergency tailgate safety release
(if equipped)
Your vehicle is equipped with the emer-
gency tailgate safety release lever locat-
ed on the bottom of the tail

Page 91 of 417

Hyundai H-1 (Grand Starex) 2016  Owners Manual 419
Features of your vehicle
D080103ATQ
Type C
Auto up/down window 
(Driver’s window, if equipped)
Depressing or pulling up the power win-
dow switch momentarily to the second
detent position (4) co

Page 92 of 417

Hyundai H-1 (Grand Starex) 2016  Owners Manual Features of your vehicle
20 4
If the power window is not operated cor-
rectly, the automatic power window sys-
tem must be reset as follows:
1. Turn the ignition switch to the ON posi-
tion.
2. Close

Page 94 of 417

Hyundai H-1 (Grand Starex) 2016  Owners Manual Features of your vehicle
22 4
D090100BUN
Opening the hood 
1. Pull the release lever to unlatch the
hood. The hood should pop open
slightly.2. Go to the front of the vehicle, raise the
hood slightly,

Page 95 of 417

Hyundai H-1 (Grand Starex) 2016  Owners Manual 423
Features of your vehicle
D090200AUN
Closing the hood
1. Before closing the hood, check the fol-
lowing:
• All filler caps in engine compartment
must be correctly installed.
• Gloves, rags or a

Page 97 of 417

Hyundai H-1 (Grand Starex) 2016  Owners Manual 425
Features of your vehicle
D100200AEN
Closing the fuel filler lid
1. To install the cap, turn it clockwise until
it “clicks”. This indicates that the cap is
securely tightened.
2. Close the fuel