2016 Hyundai Equus flat tire

[x] Cancel search: flat tire

Page 322 of 477

Hyundai Equus 2016  Owners Manual 5-71
Driving your vehicle05
Highway driving
Tires
Adjust the tire inflation, as specified.
Under-inflation may overheat or
damage the tires.
Do not install worn-out or damaged
tires, which may reduce

Page 334 of 477

Hyundai Equus 2016  Owners Manual What to do in an emergency
Road warning..........................................................6-2
Hazard warning flasher ...................................................6-2
In case of an emergen

Page 335 of 477

Hyundai Equus 2016  Owners Manual Hazard warning flasher  
The hazard warning flasher serves
as a warning to other drivers to be
extremely cautious when approach-
ing, passing by or passing ahead.
It should be used when your vehicle
i

Page 340 of 477

Hyundai Equus 2016  Owners Manual (1) Low Tire Pressure Telltale/TPMS Malfunction Indicator
(2) Low Tire Pressure Position Telltale
Each tire, including the spare (if pro-
vided), should be checked monthly
when cold and inflated to th

Page 341 of 477

Hyundai Equus 2016  Owners Manual Always check the TPMS malfunction
telltale after replacing one or more
tires or wheels on your vehicle to
ensure that the replacement or alter-
nate tires and wheels allow the TPMS
to continue to func

Page 342 of 477

Hyundai Equus 2016  Owners Manual Information
A tire pressure sensor is not equipped
with the spare tire.  
TPMS (Tire Pressure
Monitoring System)
malfunction indicator
The TPMS malfunction indicator illu-
minates after approximately

Page 343 of 477

Hyundai Equus 2016  Owners Manual Changing a tire with TPMS
When you have a flat tire, both of the
low tire pressure telltale and the low
tire position telltale will illuminate.
Immediately have the flat tire
repaired or replaced by a

Page 348 of 477

Hyundai Equus 2016  Owners Manual 8.Insert the jack handle into the jack,turn it in a clockwise direction, and
raise the vehicle until the tire just
lifts above the ground. This would
be approximately 30 mm (1.2 in).
Before removing t