2016 Hyundai Equus display

INFO/Setup
6-22
Operating the Rear AVM
After turning on the ignition, shifting the gear to R will start the Rear
AVM.
Changing the gear from R to a different position will turn the Rear
AVM off.
i Information
!Ÿ
The AVM camera is equipped with an optical lens to provide a
wider range of vision and may appear different from the actual dis-
tance. For safety, directly check the rear and left/right.
No NameDescription
ò Rear Camera
Screen Displa
ys the rear side of the v

ehicle on the screen
through the camera
ó AVM aspect
camera screen Displa
ys the A
VM or the left/right side depending on
the selected option
ô Rear+AVM
Displa yDispla

ys the rear side and AVM simultaneously on the
screen
õ Rear Display Displays the rear side on the screen
ö Rear+Left
Displa yDispla

ys the rear side and left side simultaneously on
the screen
÷ Rear+Right
Displa yDispla

ys the rear side and right side simultaneously
on the screen
ø AVM Settings Displays A
VM Settings
ù
Door Open WarningDisplays whether the driver-side/passenger-side doors,
side mirrors, and trunk are open
ò
ó
ô õ ö ÷ ø
ù
)@7*@ŠÙ<64"@/>
1BSUJOEE


 )@7*@ŠÙ<64"@/>
1BSUJOEE


 

INFO/Setup
INFO/Setup l 6-23
AV M S e t t i n g s
Press the button in the Front or Rear AVM screen to display
the AVM settings.
No Name Description
ò Sync Guidelines
with Steering Set whether to sync guidelines with the steer
ing

handle
ó Front/Rear
W arning Sets whether to displa

y warning when obstacles ap-
proach the front and rear of the vehicle within AVM
view mode
ô Initial Front
View Sets the initial displa

y when entering Front AVM
mode
õ Initial Rear
Vie w Sets the initial displa

y when entering Rear AVM
mode
ò
ó
ô
õ
)@7*@ŠÙ<64"@/>
1BSUJOEE


 )@7*@ŠÙ<64"@/>
1BSUJOEE


 

Blue Link
7-4
Location Information Service
Downloading POIs from the Blue
Link Center
1. Press the key on the Rear View Mirror
to connect with the Blue Link Center.
2. Once connection is established, request
the desired POI information through voice
recognition to the Blue Link Center.
3. Once the request is completed,
The requested POI information will be
downloaded and displayed on the screen.
Downloading POIs through the
Owner’s Website
1. Visit the Blue Link website
(www.myhyundai.com) to search for
desired POI information to send to your
vehicle.
2. After transmission is complete, the follow-
ing POI downloaded message is displayed
the next time you turn on your vehicle.
3. Select the Ye s button to check the infor-
mation of downloaded POIs.
)@7*@ŠÙ<64"@/>
1BSUJOEE


 )@7*@ŠÙ<64"@/>
1BSUJOEE


 

Blue Link
Blue Link l 7-5
Checking Downloaded POI
Information
Press the key Ü Select the
Downloaded POI icon.
Select a POI on the POI list to view addi-
tional POI information.
Car Management Information
Eco Driving
Press the key Ü Select the Eco
Driving icon.
ò
õ
ó ô
No Name Description
ò Fuel
Econom y
Graph Displa

ys the average fuel
economy (Community) in 2.5
minute intervals.
ó Average
Fuel
Econom y Displa

ys the average fuel
economy after starting the
ignition.
ô
Fuel
Consumption last 2.5 min Displays the fuel economy
and consumption for the last
2.5 minutes.
õ Help Pro
vides additional
inf
ormation on Eco Driving.
)@7*@ŠÙ<64"@/>
1BSUJOEE


 )@7*@ŠÙ<64"@/>
1BSUJOEE


 

Blue Link
7-6
Parts Replacement /Inspection
Alerts
Parts replacement/inspection alerts are
also provided regularly through the website,
emails and text messages.
Automated DTC (Diagnostic Trouble
Code) Notification
This feature provides an explanation and
repair assistance using vehicle data and off-
board diagnosis capabilities. Through a com-
bination of in-vehicle display alerts and guided
voice messages, the owner will get additional
instructions and what to do next. This informa-
tion is automatically sent to the owner`s pre-
ferred dealer to assist with the repair process.
Recall and Campaign Advisor
The following message alerts are displayed
once vehicle recall or campaign information
or received.
)@7*@ŠÙ<64"@/>
1BSUJOEE


 )@7*@ŠÙ<64"@/>
1BSUJOEE




Appendix
Appendix l 8-5
Before thinking there is a product defect
The current position as shown on the navigation may differ from the
actual position under the following conditions.
The following occurrences are not malfunctions.
• When driving on Y-shaped roads
with narrow angles the current posi-
tion may be displayed in the opposite
direction.
• The current position may be
displayed on the opposite side of the
road.
• Within city streets, the current
position may be displayed on the
opposite side or on an off-road
position.
• When changing the zoom level from
maximum to a different level, the cur-
rent position may become displayed
on a different road.
• If the vehicle is loaded onto a ferry
or a car transport vehicle, the current
position may become stalled on the
last position prior to loading.
• When driving on a spiral-shaped
road.
• When driving in mountain regions
with sharp turns or sudden brakes.
• When entering a road after passing
an underground parking structure,
building parking structure, or roads
with many rotations.
• When driving in heavy traffi c with fre-
quent go/stops.
• When driving under slippery conditions,
such as heavy sand, snow, etc.
• When driving with a tire chain installed.• When the tires have recently been
replaced. (Especially upon use of spare
or studless tires)
• When using tires of improper size.• When the tire pressure for the 4 tires
are different.
• When the replacement tire is worn or
used. (Especially studless tires having
passed a 2nd seasons)
• When driving near high-rise buildings.• When a roof carrier has been installed.• When a long distance route is calculated
while driving on an expressway.
In such cases, continued driving will
automatically enable the system to
conduct map matching or use updated
GPS information to provide the current
position. (In such cases, up to several
minutes may be required)
Correct route guidance may not occur due to search conditions or
driving position.
The following occurrences are not malfunctions
• Guidance to go straight may be
given while driving on a straight road.
• Guidance may not be given even
when having turned at an
intersection.
• There are certain intersections in
which guidance may not occur.
• A route guidance signaling for a u-
turn may occur in some No u-turn
intersections.
• Route guidance signaling entrance into
a No-entry zone may occur. (No enter
zone, road under construction, etc.)
• Guidance may be given to a position
that is not the actual destination if
roads to reach the actual destination
do not exist or are too narrow.
• Faulty voice guidance may be given
if the vehicle breaks away from the
designated route. (ex : if a turn is made
at an intersection while the navigation
provided guidance to go straight)
The following may occur after conducting route calculation.
The following occurrences are not malfunctions
• Guidance may be given to a position
differing from the current position
when turning at an intersection.
• When driving in high speeds, route
recalculation may take a longer
period of time.
• Route guidance signaling for a u-
turn may occur in some No u-turn
intersections.
• Route guidance signaling entrance into
a no enter zone many occur. (No enter
zone, road under construction, etc.)
• Guidance may be given to a position
removed from the actual destination if
roads to reach the actual destination
do not exist or are too narrow.
• Faulty voice guidance may be given if
the vehicle breaks away from the des-
ignated route. (ex : if a turn is made
at an intersection while the navigation
provided guidance to go straight)
)@7*@ŠÙ<64"@/>
1BSUJOEE


 )@7*@ŠÙ<64"@/>
1BSUJOEE




Appendix
8-6
Before thinking the product has
malfunctioned
1. Errors which occur during the operation or installation of the device may be mistaken as a malfunction of the actual device.
2. If you are having problems with the device, try the suggestions listed below.
3. If the problems persist, contact your HYUNDAI dealer.
Problem Function
There are small red,
blue, or green dots on the
screen.
• Because the LCD is manufactured with
technology requiring high point density, a
pixel defi ciency or lighting may occur within
0.01% of total pixels.
The sound or image is not
working.
• Has the Switch for the vehicle been turned to
[ACC] or [ON]?
• Has the SYSTEM been turned OFF?
The video is being
displayed but sound is not
working.
• Has the volume been set to a low level?• Has the volume been set on mute?
When the power is turned
on, the corners of the
screen are dark.
• The display looking somewhat darker after
prolonged periods of use is a normal
phenomenon with LCD panels It is not a
malfunction.
• If the screen is very dark, contact your near-
est HYUNDAI dealer for assistance.
Sound is working from only
one speaker.
• Is the position of FAL/BAL sound controls or
volume adjusted to only one side?
Problem Function
Sound and video does not
work in AUX mode.
• Are the audio and video connector jacks fully
inserted into the AUX terminal?
The external device is not
working.
• Is the external device connected with a stan-
dard connector cable?
Upon turning power on, the
most recent mode screen
is not displayed. Within modes that play fi les by reading
external sources, such as discs, USB, iPod, or
Bluetooth
® streaming mode, the most recently
played mode screen prior to turning off power
may not properly load.
• If there is no disc or the corresponding device
is not connected, the mode operated prior to
the most recent mode will operate.
• If the previous mode still cannot be properly
played, the mode operated prior to that will
operate.

)@7*@ŠÙ<64"@/>
1BSUJOEE


 )@7*@ŠÙ<64"@/>
1BSUJOEE


 

Appendix
Appendix l 8-7
Troubleshooting
Problem Possible Cause Countermeasure
The power
does not turn
on. The fuse is
disconnected.
• Replace with a suitable fuse.• If the fuse is disconnected.
again, please contact your point
of purchase or service center.
Device is not properly
connected.
• Check to see that the device
has been properly connected.
The system
does not
Play. The disc has not been
inserted or has been
inserted upside down.
• Insert the disc properly so that
the sides are facing the correct
Direction.
The disc has been
Contaminated.
• Wipe away dirt and other
foreign substances from the disc.
The vehicle battery is
Low.
• Charge the battery If the
problem persists, contact your
point of purchase or service
center.
A disc not supported by
the device has been
Inserted.
• Insert a disc which is supported
by the device.
A disc with a region
code not supported by
the device has been
inserted.
• The region code for the device
is code “1”.
• Use a DVD which has the
region code of “1” or “ALL”.
The image
color/tone
quality is low. The brightness,
saturation, hue, and
contrast levels are not
set properly.
• Properly adjust the brightness,
saturation, hue, and contrast
levels through Display Setup.
Problem Possible Cause Countermeasure
Video does
not work
• The brightness level is
set to the lowest level.• Adjust the brightness to a
higher level.
• Video media is not
properly connected.• Check to see that the device
has been properly connected.
Sound does
not work
• The volume level is
set the lowest level.• Adjust the volume level.
• The connection is not
proper.• Check to see that the device
has been properly connected.
• The device is currently
fast-forwarding,
rewinding, scanning,
or playing in slow
mode.• The sound will not work when
the device is fast-forwarding,
rewinding, scanning, or playing
in slow mode.
The sound or
video quality is
low
• The disc is dirty or
scratched.• Wipe off water or dirt from the
DISC Do not use a disc which
has been scratched.
• Vibration is
occurring from where
the conversion switch
has been installed.• The sound may be
short-circuited and the image
distorted if the device vibrates.
The device will return to normal
once vibrations stop.
• Image color/tone
quality is low.• Aging of the video display and
deterioration in performance
may cause certain quality
degradations.
• The brightness level is
set to the lowest level.• Adjust the brightness to a
higher level.
)@7*@ŠÙ<64"@/>
1BSUJOEE


 )@7*@ŠÙ<64"@/>
1BSUJOEE