2016 Hyundai Creta headrest

2-17
Safety system of your vehicle
2
Type B
1. Inser t the rear seat belt webbing in
the guide to prevent the seat belt
from being damaged.
2. Set the front seatback to the upright position and if necessary,
slide the front seat forward.
3. Lower the rear headrests to the lowest position. 4. Pull up the seatback lever, then
fold the seat toward the front of the
vehicle. 5. To use the rear seat, lift and push
up the seatback backward. Push
the seatback firmly until it clicks
into place. Make sure the seatback
is locked in place.
When returning the rear seatbacks to
the upright position, remember to
return the rear shoulder belts to their
proper position.
OGC034006OGC034009OGS035037

2-33
Safety system of your vehicle
2
Installing a Child Restraint
System (CRS)
After selecting a proper Child Restraint
System and checking that the Child
Restraint System fits properly in the
rear of this vehicle, you are ready to
install the Child Restraint System
according to the manufacturer’s
instruction. There are three general
steps in installing the Child Restraint
Systems properly: •
Properly secure the Child Restraint
System to the vehicle.All Child
Restraint System must be secured
to the vehicle with the lap belt or
lap part of a lap/shoulder belt or
with the ISOFIX toptether and/or
ISOFIX anchorage.
•
Make sure the Child Restraint
System is firmly secured. After
installing a Child Restraint System
to the vehicle, push and pull the
seat forward and from sidetoside
to verify that it is securely attached
to the seat. A Child Restraint
System secured with a seat belt
should be installed as firmly as
possible. However, some sideto
side movement can be expected. When installing a Child Restraint
System, adjust the vehicle seat (up
and down, forward and rearward)
so that your child fits in the Child
Restraint System in a comfortable
manner.
•
Secure the child in the Child
Restraint System. Make sure the
child is properly strapped in the
Child Restraint System according
to the Child Restraint System man
ufacturer’s instructions.
Before installing your Child
Restraint System always:
Read and follow the instructions
provided by the manufacturer of
the Child Restraint System.
Failure to follow all warnings and
instructions could increase the risk
of the SERIOUS INJURY or
DEATH if an accident occurs.
WARNING
If the vehicle headrest prevents
proper installation of a Child
Restraint System, the headrest of
the respective seating position
shall be readjusted or entirely
removed.
WARNING
A Child Restraint System in a
closed vehicle can become very
hot. To prevent burns, check the
seating surface and buckles
before placing your child in the
Child Restraint System.
CAUTION

Securing a Child Restraint System
seat with “Toptether Anchorage”
system
Child Restraint hook holders are
located on the rear of the seatbacks. 1.Route the Child Restraint System
seat strap over the seatback.
For vehicles with adjustable head
rest, route the tether strap under
the headrest and between the
headrest posts, otherwise route
the tether strap over the top of the
seatback.
2.Connect the toptether to the top tether anchorage, then tighten the
toptether according to the instruc
tions of your Child Restraint
System's manufacturer to firmly
attach the Child Restraint System
to the seat.
2-37
Safety system of your vehicle
2
OGC034028
OGS035038
Take the following precautions
when installing the toptether:
•Read and follow all installation
instructions provided with your
Child Restraint System.
•NEVER attach more than one
Child Restraint System to a sin
gle ISOFIX toptether anchor
age. This could cause the
anchorage or attachment to
come loose or break.
•Do not attach the toptether to
anything other than the correct
toptether anchorage. It may not
work properly if attached to
something else.
•Child Restraint anchorages are
designed to withstand only those
loads imposed by correctly fitted
Child Restraint System.
Under no circumstances are
they to be used for adult seat
belts or harnesses or for attach
ing other items or equipment to
the vehicle.
WARNING

3-33
Convenient features of your vehicle
3
Inside rearview mirror
Before you start driving, adjust the
rearview mirror to the center on the
view through the rear window.
Day/night rearview mirror
Make this adjustment before you
start driving and while the day/night
lever is in the day position.
Pull the day/night lever toward you to
reduce glare from the headlights of
the vehicles behind you during night
driving.
Remember that you lose somerearview clarity in the night position.
MIRRORS
Make sure your line of sight is not
obstructed. Do not place objects in
the rear seat, cargo area, or behind
the rear headrests which could
interfere with your vision through the
rear window.
WARNING
To prevent serious injury during
an accident or deployment of the
air bag, do not modify the rearview
mirror and do not install a wide
mirror.
WARNING
NEVER adjust the mirror while
driving. This may cause loss of
vehicle control resulting in an acci
dent.
WARNING
OGC044215
Day Night