2016 Hyundai Creta air conditioning

3-99
Convenient features of your vehicle
Automatic heating and air condi
tioning
The Automatic Climate Control System
is controlled by setting the desired tem
perature.
1. Press the AUTO button.
The modes, fan speeds, air intake
and airconditioning will be controlled
automatically by the temperature set
ting you select.2. Turn the temperature control knob
to the desired temperature. If the
temperature is set to the lowest
setting (LO), the air conditioning
system will operate continuously. To turn the automatic operation off,
select any button of the following:
Mode selection button
Front windshield defrost button
Fan speed control button
The selected function will be con
trolled manually while other functions
operate automatically.
For your convenience and to improve
the effectiveness of the climate con
trol, use the AUTO button and set the
temperature to 23°C (73°F).
OGS045128
OGS045129

3-100
Convenient features of your vehicle
3
Information
Never place anything near the sensor
located to ensure better control of the
heating and cooling system.
Manual heating and air condition
ing
The heating and cooling system can
be controlled manually by pressing
buttons other than the AUTO button.
In this case, the system works
sequentially according to the order of
buttons selected.
When pressing any button (or turning
any knob) except the AUTO button
while using automatic operation, the
functions not selected will be con
trolled automatically.
1. Start the engine.
2. Set the mode to the desired posi tion.
To improve the effectiveness of
heating and cooling: Heating:
Cooling: 3. Set the temperature control to the
desired position.
4. Set the air intake control to the outside (fresh) air position.
5. Set the fan speed control to the desired speed.
6. If air conditioning is desired, turn the air conditioning system on.
7. Press the AUTO button in order to convert to full automatic control of
the system.
i
OGS045041

3-104
Convenient features of your vehicle
3
Recirculated air position
The indicator light on the
button illuminates when
the recirculated air posi
tion is selected.
With the recirculated air
position selected, air from
passenger compartment
will be drawn through the
heating system and heat
ed or cooled according to
the function selected.
Outside (fresh) air position
The indicator light on the
button will turn off when
the outside (fresh) air
position is selected.
With the outside (fresh)
air position selected, air
enters the vehicle from
outside and is heated or
cooled according to the
function selected.
Information
Prolonged use of the air conditioning
with the recirculated air position
selected will result in excessively dry
air in the passenger compartment. i
•Continued use of the climate
control system operation in the
recirculated air position can
cause drowsiness or sleepiness,
that may cause loss of vehicle
control resulting in an accident.
Set the air intake control to the
outside (fresh) air position as
much as possible while driving.
•Continued use of the climate
control system operation in the
recirculated air position (without
the air conditioning selected)
may allow humidity to increase
inside the vehicle which may fog
the glass and obscure visibility.
•Do not sleep in a vehicle with air
conditioning or heating system
on. It may cause serious harm
or death due to a drop in the
oxygen level and/or body tem
perature.
WARNING

3-105
Convenient features of your vehicle
Fan speed control
Turn the knob to the right increase
the fan speed and air flow. Turn the
knob to the left to decrease fan speed and air flow.
Air conditioning
Push the A/C button to manually turn
the system on (indicator light will illu
minate) and off.
OFF mode
Push the OFF button to turn off the
climate control system. You can still
operate the mode and air intake but
tons with the ignition switch in the
ON position.
OGS045131OGS045132OGS045090L

3-106
Convenient features of your vehicle
3
System operation
Ventilation
1. Select the Face Level mode.
2. Set the air intake control to theoutside (fresh) air position.
3. Set the temperature control to the desired position.
4. Set the fan speed control to the desired speed.
Heating
1. Select the Floor Level mode.
2. Set the air intake control to theoutside (fresh) air position.
3. Set the temperature control to the desired position.
4. Set the fan speed control to the desired speed.
5. If dehumidified heating is desired, turn the air conditioning system (if
equipped) on.
If the windshield fogs up, select the
Front Defroster mode. Operation Tips
• To keep dust or unpleasant fumes
from entering the car through the
ventilation system, temporarily set
the air intake control to the recircu
lated air position. Return the con
trol to the fresh air position when
the irritation has passed. This will
help keep the driver alert and com
fortable.
• To prevent inside of the windshield from fogging, set the air intake con
trol to the fresh air position and fan
speed to the desired position, turn
on the air conditioning system, and
adjust the temperature control to
desired temperature.
Air conditioning (if equipped)
HYUNDAI Air Conditioning Systems
are filled with a R134a refrigerant.
1. Start the engine.
2. Push the air conditioning button.
3. Set the mode to the Face Level mode.
4. Set the air intake control to the recirculated air position. However,
prolonged operation of the recircu
lated air position will excessively
dry the air. In this case, change the
air position.
5. Adjust the fan speed control and temperature control to maintain
maximum comfort.
When maximum cooling is desired,
set the temperature control to the
lowest setting (LO) then set the fan
speed control to the highest speed.

3-107
Convenient features of your vehicle
When using the air conditioning sys
tem, monitor the temperature gauge
closely while driving up hills or in
heavy traffic when outside tempera
tures are high. Air conditioning sys
tem operation may cause engine
overheating. Continue to use the
blower fan but turn the air condition
ing system off if the engine tempera
ture gauge indicates engine overheat
ing.
Air conditioning system operation
tips
• If the vehicle has been parked indirect sunlight during hot weather,
open the windows for a short time
to let the hot air inside the vehicle
escape.
• After sufficient cooling has been achieved, switch back from the
recirculated air to the fresh outside
air position.
• To help reduce moisture inside of the windows on rainy or humid
days, decrease the humidity inside
the vehicle by operating the air
conditioning system with the win
dows closed.
• Use the air conditioning system every month only for a few minutes
to ensure maximum system per
formance. • If you operate air conditioner
excessively, the difference between
the temperature of the outside air
and that of the windshield could
cause the outer surface of the
windshield to fog up, causing loss
of visibility. In this case, set the
mode selection knob or button to
the position and fan speed
control to the lower speed.
NOTICE

3-108
Convenient features of your vehicle
3
System maintenance
Climate control air filter
This filter is installed behind the glove
box. It filters the dust or other pollutants
that enter the vehicle through the heat
ing and air conditioning system.
We recommend the climate control airfilter be replaced by an authorized
HYUNDAI dealer according to the
maintenance schedule. If the car is being driven in severe conditions such as dusty or rough roads, more frequentair conditioner filter inspections and
changes are required.
If the air flow rate suddenly decreases,we recommend the system be checked
at an authorized HYUNDAI dealer.
Checking the amount of air
conditioner refrigerant and com
pressor lubricant
When the amount of refrigerant is
low, the performance of the air con
ditioning is reduced. Overfilling also
has a bad influence on the air condi
tioning system.
Therefore, if abnormal operation is
found, we recommend that the system
be inspected by an authorized
HYUNDAI dealer.
Information
It is important that the correct type
and amount of oil and refrigerant is
used. Otherwise, damage to the com
pressor and abnormal system opera
tion may occur. We recommend the air conditioning
system be serviced by an authorized
HYUNDAI dealer.i
1LDA5047
Outside air
Recirculatedair
Climate control air filter Blower
Evaporatorcore Heater core
Because the refrigerant
is at very high pressure,
the air conditioning sys
tem should only be serv
iced by trained and certi
fied technicians. It is important that
the correct type and amount of oil
and refrigerant is used, otherwise
damage to the vehicle and personal
injury may occur.
WARNING

3-109
Convenient features of your vehicle
Windshield defrosting and defog
ging
• For maximum defrosting, set thetemperature control to the extreme
right/hot position and the fan speed
control to the highest speed.
• If warm air to the floor is desired while defrosting or defogging, set
the mode to the floordefrost position.
• Before driving, clear all snow and ice from the windshield, rear win
dow, outside rear view mirrors, and
all side windows.
• Clear all snow and ice from the hood and air inlet at the buttom of
the windshield.
• If the engine temperature is still cold after starting, then a brief
engine warm up period may be
required for the vented air flow to
become warm or hot.Manual climate control system
To defog inside windshield
1. Select desired fan speed.
2. Select desired temperature.
3. Select the or position.
4. The outside (fresh) air will be select ed automatically. Additionally, the air
conditioning (if equipped) will auto
matically operate if the mode is
selected to the or position.
If the air conditioning and outside
(fresh) air position are not selected
automatically, press the correspon
ding button manually.
Do not use the or position
during cooling operation in
extremely humid weather. The dif
ference between the temperature
of the outside air and that of the
windshield could cause the outer
surface of the windshield to fog
up, causing loss of visibility. Set
the mode selection to the
position and fan speed control to a
lower speed.
WARNING
OGS045043L