2016 HONDA PILOT hood release

Visual Index
6
Quick Reference Guide❙Power Window Switches (P147)
❙Memory Buttons* (P169)
❙SET Button (P169)
❙Power Door Lock Master Switch (P133)
❙Power Tailgate Button* (P142)
❙Fuel Fill Door Release Button
(P551)
❙Door Mirror Controls (P172)
❙Rearview Mirror (P171)
❙Driver’s Front Airbag (P48)
❙Passenger’s Front Airbag (P48)
❙Shift Button* (P471)
❙Shift Lever* (P469)
❙Intelligent Traction Management
Button
(P484)
❙Auto Idle-stop OFF Button* (P479)
❙Hood Release Handle (P564)
❙Accessory Power Socket (P196)
❙USB Port(s)* (P219)
❙Glove Box (P191)
❙USB Port (P219)
❙Accessory Power Socket (P196)
❙Auxiliary Input Jack (P220)
❙Driver’s Side Interior Fuse Box* (P630)
❙Parking Brake (P527)
❙Driver’s Side Interior Fuse Box (P631)
16 PILOT-31TG76000.book 6 ページ ２０１５年６月１５日　月曜日　午前１１時３０分

Visual Index
8
Quick Reference Guide❙Maintenance Under the Hood (P563)
❙Windshield Wipers (P163, 581)
❙Tires (P585, 607)
❙Door Lock/Unlock Control (P123)
❙Power Door Mirrors (P172)
❙Headlights (P155, 575)
❙Side Marker Lights (P155, 578)
❙Front Turn Signal/Parking Lights* (P154, 578)
❙Fog Lights* (P158, 578)
❙Side Turn Signal Lights* (P154, 578)
❙Daytime Running Lights /Parking Lights* (P162, 578)
❙How to Refuel (P551)
❙High-Mount Brake Light (P580)
❙Opening/Closing the Tailgate (P135)
❙Rear Wiper (P165)
❙Multi-View Rear Camera (P549)
❙Tailgate Release Button (P138)
❙License Plate Lights (P580)
❙Rear Side Marker Lights (P579)
❙Taillights (P579)
❙Brake Lights and Rear Turn Signal Lights (P579)
❙Back-Up Lights (P580)
16 PILOT-31TG76000.book 8 ページ ２０１５年６月１５日　月曜日　午前１１時３０分

25
Quick Reference Guide
Maintenance (P555)
Under the Hood (P563)
● Check engine oil, engine coolant, and windshield washer
fluid. Add when necessary.
● Check brake fluid.
● Check the battery condition monthly.
aPull the hood release handle under the corner of the
dashboard.
bLocate the hood latch lever, pull the lever up, and lift up
the hood.
cWhen finished, close the hood and make sure it is firmly
locked in place.
Lights (P575)
● Inspect all lights regularly.
Wiper Blades (P581)
● Replace blades if they leave streaks
across the windshield.
Tires (P585)
● Inspect tires and wheels regularly.
● Check tire pressures regularly.
● Install snow tires for winter
driving.
* Not available on all models
16 PILOT-31TG76000.book 25 ページ ２０１５年６月１５日　月曜日　午前１１時３０分

105
uuIndicators uMulti-Information Display (MID) Warning and Information Messages
Continued
Instrument Panel
MessageConditionExplanation
●Appears when you change to (N, then press and hold
(N again for two seconds.
●The gear position remains in (N for 15 minutes, then
automatically switches to
(P.
2 If you want to keep the transmission in (N
position [car wash mode] P. 475
●Appears when the vehicle is stopped with the driver’s
seat belt unfastened and there is a chance that the
vehicle may roll unintentionally.●Press the (P button before release the brake pedal
when idling, parking or exiting the vehicle.
2 Shift Operation P. 473
●Appears when the engine stops without the
transmission in
(P, and does not restart automatically.●Appears if you open the hood while Auto Idle-stop
activates.
●If you want to set the power mode to ON, change the
gear position to
(P.●If you want to start the engine, follow the normal
procedure.
2Starting the Engine P. 461
Automatic transmission models with electronic gear selector
16 PILOT-31TG76000.book 105 ページ ２０１５年６月１５日　月曜日　午前１１時３０分

Continued145
uuSecurity System uSecurity System Alarm
Controls
■To deactivate the security system alarm
Unlock the vehicle using the key, remote transmitter, or smart entry system. The
system, along with the horn and flashing lights, is deactivated.
■Setting the security system alarm
The security system alarm automatically sets when the following conditions have
been met:
• The power mode is set to VEHICLE OFF (LOCK).
• The hood is closed.
• All doors and the tailgate are locked from outside with the key, remote
transmitter, or smart entry system.
■When the security system alarm sets
The security system alarm indicator in the instrument panel blinks. When the
blinking interval changes after about 15 se conds, the security system alarm is set.
■To cancel the security system alarm
The security system alarm is canceled wh en the vehicle is unlocked using the key,
remote transmitter, smart entry system, or th e power mode is set to ON. The security
system alarm indicator goes off at the same time.
1 Security System Alarm
Do not set the security system alarm when someone
is in the vehicle or a window is open. The system can
accidentally activate when:
•Unlocking the door with the lock tab.•Opening the hood with the hood release.
If the battery goes dead after you have set the
security system alarm, the security alarm may go off
once the battery is re charged or replaced.
If this occurs, deactivate the security system alarm by
unlocking a door using the ke y, remote transmitter,
or smart entry system.
Do not attempt to alter th is system or add another
device to it.
16 PILOT-31TG76000.book 145 ページ ２０１５年６月１５日　月曜日　午前１１時３０分

Continued179
uuAdjusting the Seats uAdjusting the Seat Positions
Controls
Your vehicle is equipped with head restraints
in all seating positions.
Head restraints are most effective for
protection against whiplash and other rear-
impact crash injuries when the center of the
back of the occupant’s head rests against the
center of the restraint. The tops of the
occupant’s ears should be level with the
center height of the restraint.
■Adjusting the front and second ro w outer head restraint positions*
To raise the head restraint: Pull it upward.
To lower the head restraint: Push it down
while pressing the release button.
■Adjusting the Head Restraints1 Adjusting the Head Restraints
In order for the head restraint system to work
properly:
•Do not hang any items on the head restraints, or
from the restraint legs.
•Do not place any objects between an occupant and
the seat-back.
•Install each restraint in its proper location.
3WARNING
Improperly positioning head restraints
reduces their effectiveness and increases
the likelihood of serious injury in a crash.
Make sure head restraints are in place and
positioned properly before driving.
Position head in the center
of the head restraint.
* Not available on all models
16 PILOT-31TG76000.book 179 ページ ２０１５年６月１５日　月曜日　午前１１時３０分

564
uuMaintenance Under the Hood uOpening the Hood
Maintenance
Opening the Hood
1. Park the vehicle on a level surface, and set
the parking brake.
2. Pull the hood release handle under the
lower left corner of the dashboard.
u The hood will pop up slightly.
3. Push up the hood latch lever in the center
of the hood to release the lock mechanism,
and open the hood.
4. Remove the support rod from the clamp
using the grip. Mount the support rod in
the hood.
When closing, remove the support rod, and
stow it in the clamp, then gently lower the
hood. Remove your hand at a height of
approximately 12 inches (30 cm) and let the
hood close.1 Opening the Hood
NOTICE
Do not open the hood when the wiper arms are
raised.
The hood will strike the wipers, and may damage
either the hood or the wipers.
When closing the hood, check that the hood is
securely latched.
If the hood latch lever moves stiffly, or if you can
open the hood without lifti ng the lever, the latch
mechanism should be cleaned and lubricated.
Do not open the hood while the Auto Idle-stop
function is activated.
Models with Auto Idle-stop
Hood Release Handle
Pull
Lever
Support RodGrip
Clamp
16 PILOT-31TG76000.book 564 ページ ２０１５年６月１５日　月曜日　午前１１時３０分