Page 14 of 590
13
Quick Reference Guide
Controls (P 121)
Clock (P 122)
aPress and hold the MENU/CLOCK 
button.
bRotate   to change hour, then press  .
cRotate   to change minute, then 
press .
dSelect  SET, then press  .
These indications are used to show how to 
operate the LIST/SELECT  (List/Selector) knob.
•Rotate   to select.
•Press   to enter.
Models with color audio system
The audio system receives signals from GPS 
satellites, updating the clock automatically.
aSelect the   (HOME) icon, then select 
Settings.
bSelect Clock, then  Clock Adjustment .
cTouch the respective   /   icon to 
adjust the hours or minutes up or 
down.
dSelect OK.
Models with Display Audio
34
ENGINE START/STOP 
Button
*
●Press the button to change the vehicle’s 
power mode.
* Not available on all models
16 CIVIC 4D-31TBA6000.book  13 ページ  2015年8月31日 月曜日 午後5時56分 
     
        
        Page 113 of 590
112
uuGauges and Displays uDriver Information Interface*
Instrument Panel
■Customization flow
Press the   button.
ENTERVehicle Settings
“Trip A” Reset Timing
Language Selection
Adjust Outside Temp. Display
3
4
3
4
TPMS Calibration*
ENTER
“Trip B” Reset Timing
Fuel Efficiency Backlight
3
4
ACC Forward Vehicle Detect Beep
3
4Tachometer
ENTER
Forward Collision Warning Distance
3
4
3
4
Lane Keeping Assi st Suspend Beep
Road Departure Mi tigation Setting
Adjust Alarm Volume
Speed/Distance Units
Adjust Clock
3
4
Clock Display
3
4
ENTER
ENTERClock Setup
Driver Assist System Setup
Meter Setup
* Not available on all models
16 CIVIC 4D-31TBA6000.book  112 ページ  2015年8月31日 月曜日 午後5時56分 
     
        
        Page 115 of 590
114
uuGauges and Displays uDriver Information Interface*
Instrument Panel
■List of customizable options
*1:Default Setting Setup Group Customizable Features Description Selectable Settings
TPMS 
Calibration*—Calibrates the TPMS.Cancel
/Calibrate
Clock Setup Adjust Clock
Adjusts clock.
2
Clock  P. 122—
Clock Display Selects the digital clock display from 12H to 24H. 24h/12h
*1/OFF
Driver Assist 
System 
Setup
Forward Collision 
Warning DistanceChanges at which distance the CMBSTM alerts.Long /Normal*1/Short
ACC Forward Vehicle 
Detect BeepCauses the system to beep when the system detects a 
vehicle, or when the vehi cle goes out of ACC range.ON/OFF*1
Road Departure 
Mitigation SettingChanges the setting for the road departure 
mitigation system.Normal*1/Wide /Warning 
Only
Lane Keeping Assist 
Suspend BeepCauses the system to beep when the LKAS is 
suspended.ON /OFF*1
* Not available on all models
16 CIVIC 4D-31TBA6000.book  114 ページ  2015年8月31日 月曜日 午後5時56分 
     
        
        Page 124 of 590

123
uuClock uAdjusting the Clock
Controls
■Using the Settings menu on the audio/
information screen
1. Select  Settings .
2. Select  Clock.
3. Select  Clock Adjustment .
4. Select  or  to change hour.
5. Select   or   to change minute, then 
select  OK.
Models with Display Audio1Using the Settings menu on the audio/information screen
You can customize the clock display to show the 12 
hour clock or 24 hour clock.
2 Customized Features  P. 302
The clock display is set to  off by factory default.
You can turn the clock display on and off. 2 Customized Features  P. 302
The clock is automatically updated when your 
smartphone is connected to the audio system.
You can also adjust the clock by touching the clock 
displayed on the upper right corner of the display.
1. Touch the clock on the display for a few seconds.
2. Select Clock Adjustment.
3. Select   or   to change hour.
4. Select   or   to change minute, then select  OK.
Models with Display Audio
3434
VOL
HOME
MENUBACK
AUDIO
34
34
16 CIVIC 4D-31TBA6000.book  123 ページ  2015年8月31日 月曜日 午後5時56分 
     
        
        Page 206 of 590

205
Features
Audio System Basic Operation
To use the audio system, the ignition switch must be in ACCESSORY (q or ON (w.
Use the selector knob or  MENU/CLOCK 
button to access some audio functions.
Press   to switch between the normal and 
extended display fo r some functions.
Selector knob:  Rotate left or right to scroll 
through the available choices. Press   to set 
your selection.
MENU/CLOCK button: Press to select any 
mode.
The available mode in cludes the wallpaper, 
display, clock, language setup, and play 
modes. Play modes can be also selected from 
scan, random, repeat, and so on.
 (Back) button:  Press to go back to the previous display.
 button:  Press to select the sound setting mode.
 button:  Press to change the audio/in formation screen brightness.
Press  , then adjust the brightness using  . u Each time you press  , the mode switches between the daytime mode, 
nighttime mode and  OFF mode.
Models with color audio system1Audio System Basic Operation
These indications are used  to show how to operate 
the selector knob.
Rotate   to select.
Press   to enter.
Menu Items 2 Adjust Clock P. 122
2 Wallpaper Setup  P. 208
2 Display Setup  P. 211
2 Scan  P. 213, 219
2 Play Mode P. 216, 219
2 RDS Settings P. 213
2 Bluetooth  P. 220, 276
Press the SOURCE ,  ,  ,   or   button on the 
steering wheel to cha nge any audio setting.
2 Audio Remote Controls  P. 201
 (Back) 
Button
Selector Knob MENU/
CLOCK
 
Button
 Button
 (Sound) 
Button
Menu Display
16 CIVIC 4D-31TBA6000.book  205 ページ  2015年8月31日 月曜日 午後5時56分 
     
        
        Page 208 of 590
207
uuAudio System Basic Operation uAudio/Information Screen
Continued
Features
■Audio
Shows the current audio information.
■Clock/Wallpaper
Shows a clock screen or an image you import.
■Change display
1. Press the MENU/CLOCK  button.
2. Rotate   to select  Settings, then press  .
3. Rotate   to select  Display Change, then press  .
4. Rotate   to select  Wallpaper, then press  .
u If you want to return to the audio display, select  Audio.
16 CIVIC 4D-31TBA6000.book  207 ページ  2015年8月31日 月曜日 午後5時56分 
     
        
        Page 209 of 590

uuAudio System Basic Operation uAudio/Information Screen
208
Features
You can change, store, and delete the wallpaper on the audio/information screen.
■Import wallpaper
You can import up to three images, one  at a time, for wallpaper from a USB flash 
drive.
1.Connect the USB flash drive to the USB 
port.
2 USB Port(s)  P. 199
2.Press the MENU/CLOCK  button.
3. Rotate  to select  Settings, then press 
.
4. Rotate   to select Wallpaper , then press 
.
5. Rotate  to select  Import, then press  .
u The picture name is displayed on the list.
6. Rotate   to select a desired picture, then 
press .
u The selected picture is displayed.
7. Press   to save the picture.
8. Press   to select  OK.
9. Rotate   to select a location to save the 
picture, then press  .
u The display will return to the wallpaper 
setting screen.
■Wallpaper Setup1Wallpaper Setup
•When importing wallpaper files, the image must be 
in the USB flash drive’s root  directory. Images in a 
folder cannot be imported.
•The file name must be fewer than 64 characters.•The file format of the im age that can be imported 
is BMP (bmp) or JPEG (jpg).
•The individual file size limit is 2 MB.•The maximum image size is 1,920 x 936 pixels. If 
the image size is less than 480 × 234 pixels, the 
image is displayed in the middle of the screen with 
the extra area appearing in black.
•Up to 255 files can be selected.
•If the USB flash drive doe s not have any pictures, 
the  No files detected  message appears.
16 CIVIC 4D-31TBA6000.book  208 ページ  2015年8月31日 月曜日 午後5時56分 
     
        
        Page 210 of 590

209
uuAudio System Basic Operation uAudio/Information Screen
Features
■Select wallpaper
1. Press the MENU/CLOCK  button.
2. Rotate   to select  Settings, then press  .
3. Rotate   to select  Wallpaper, then press  .
4. Rotate   to select  Select, then press  .
u The screen changes to  the wallpaper list.
5. Rotate   to select a desired wallpaper, then press  .
■To view wallpaper once it is set
1. Press the MENU/CLOCK  button.
2. Rotate   to select  Settings, then press  .
3. Rotate   to select  Display Change, then press  .
4. Rotate   to select  Wallpaper, then press  .
u The screen changes to  the wallpaper list.
5. Rotate   to select a wallpaper that  you want to set, then press  .
■Delete wallpaper
1. Press the MENU/CLOCK  button.
2. Rotate   to select  Settings, then press  .
3. Rotate   to select  Wallpaper, then press  .
4. Rotate   to select  Delete, then press  .
u The screen changes to  the wallpaper list.
5. Rotate   to select a wallpaper that  you want to delete, then press  .
6. Rotate   to select  Yes, then press  .
u The display will return to  the wallpaper setting screen.
1Wallpaper Setup
To go back to the previous screen, press the   
(Back) button.
When the file size is large, it takes a while to be 
previewed.
16 CIVIC 4D-31TBA6000.book  209 ページ  2015年8月31日 月曜日 午後5時56分