2016 FORD MUSTANG instrument cluster

[x] Cancel search: instrument cluster

Page 82 of 391

FORD MUSTANG 2016 6.G Owners Manual Stability Control Off
It will illuminate when you switch
the system off. It will go out
when you switch the system
back on or when you switch the ignition
off.  See Using Stability Control (page
143).

Page 91 of 391

FORD MUSTANG 2016 6.G Owners Manual INFORMATION MESSAGES
Note:
Depending on your vehicle options
and instrument cluster type, not all of the
messages display or are available. The
information display may abbreviate or
shorten certain me

Page 129 of 391

FORD MUSTANG 2016 6.G Owners Manual •
You may need to cycle the ignition from
off to on several times after refueling
to allow the fuel system to pump the
fuel from the fuel tank to the engine.
On restarting, cranking time will take a

Page 131 of 391

FORD MUSTANG 2016 6.G Owners Manual Note:
A fuel spillage concern may occur if
overfilling the fuel tank. Do not overfill the
tank. The fill pipe is equipped with a drain
hole. Excess fuel due to overfill may drain
through the drain hol

Page 138 of 391

FORD MUSTANG 2016 6.G Owners Manual With your vehicle in drive (D), the paddle
shifters provide temporary manual control.
They allow you the ability to shift gears
quickly, without taking your hands off the
steering wheel. The system de

Page 144 of 391

FORD MUSTANG 2016 6.G Owners Manual PRINCIPLE OF OPERATION
The traction control system helps avoid
drive wheel spin and loss of traction.
If your vehicle begins to slide, the system
applies the brakes to individual wheels
and, when need

Page 154 of 391

FORD MUSTANG 2016 6.G Owners Manual PRINCIPLE OF OPERATION
Cruise control lets you maintain a set
speed without keeping your foot on the
accelerator pedal. You can use cruise
control when your vehicle speed is greater
than 20 mph (30 km

Page 156 of 391

FORD MUSTANG 2016 6.G Owners Manual Switching Adaptive Cruise Control
On
Press and release ON.
The indicator appears in the
instrument cluster.
The indicator, current gap setting and set
speed appears in the instrument cluster.
Setting
Page:   < prev 1-8 9-16 17-24 next >