INSTRUMENT PANEL
12
4
3
6
9
5
8
4 • 5*if equipped
*if equipped
7
10
1 Luggage Compartment*/
Liftgate* Release
2 Cruise Control*
To Set Your Cruise Control Speed
A. Press and release the ON control.
B. Drive to the desired speed.
C. Press and release the SET + control,
then take your foot off the accelerator. After you set your speed, you can press
SET + or SET – to adjust your cruise
speed. To disable, tap the brake,
press the clutch pedal or press the
CAN
(Cancel) control.
Note: Using the clutch pedal to cancel a
set speed may cause the engine speed
to increase briefly.
3 Service Engine Soon Light
Lights briefly when you switch the ignition on. If it
remains on or blinks after you start the engine, the On-Board
Diagnostics (OBD-II) system detects a problem. Drive in a
moderate fashion and contact your authorized dealer as
soon as possible.
4 Information Displays
Provides information about various systems on your vehicle.
Use the left, 5-way controls, located on the steering wheel,
to choose and confirm settings and messages. Refer to the
Information Displays chapter of your Owner’s Manual for
more information.
5 Wiper Controls
6 Steering Wheel Controls*
Use the right-hand, 5-way controls to adjust the
following features:
Press VOL + or – to increase or decrease volume levels.
Press
to access the previous or next radio station, CD
or MP3 track or preset satellite radio channel.*
Press
to access voice recognition.
Press
to answer a call.
Press
to exit phone mode or end a call.
7 Push Button Switch*
Allows you to start your vehicle by pressing the START STOP
control while fully pressing down on the brake (automatic
transmission) or clutch (manual transmission) pedal. Press
the control again to switch the engine off. Note: Your intelligent access transmitter must be inside the
vehicle for keyless starting to work.
8 Tilt/Telescope Steering Column
Unlock the steering wheel by pulling the lever down. Adjust
the wheel to the desired position. Push the lever back up to
lock the steering wheel in place.
9 Hazard Warning Flashers
10 Auto-Start-Stop*
The system reduces fuel consumption and CO2 emissions
by shutting down the engine when you idle your vehicle, for
example at traffic lights. When you switch the ignition on,
the system automatically turns on.
To switch the system off, press the
switch and the word
OFF illuminates. Press again to switch the system back
on. The system only switches off for the current ignition
cycle. See the Unique Driving Characteristics chapter in
your Owner’s Manual for complete details.
