2016 FORD FLEX lights

1110
SYNC® 3* FLEX
A REVOLUTIONARY WAY TO CONNECT WITH YOUR VEHICLE.
CLIMATE
Access climate control features, including
the temperature, airflow direction, fan speed
and other climate features for you and your
front passenger.
Set Your Temperature
- Touch the Climate icon on the touchscreen.
- Use voice commands to change your settings,
like “Climate set temperature to 72 degrees”
and SYNC 3 makes that adjustment.
- You can also use the ▲ or ▼ buttons on
the touchscreen.
ENTERTAINMENT
No matter how you store your music, SYNC 3
makes it yours to enjoy when you’re behind the
wheel. Press the Audio icon on the touchscreen,
and from here, you can easily go between

AM/FM, SiriusXM and other media sources.
Set Your Radio Presets
- Tune to the station and then press and hold
one of the memory preset buttons. The audio
mutes briefly while the system saves the
station, and then the audio returns.
- Two preset banks are available for AM and
three banks for FM. To access additional
presets, tap the preset button. The indicator on
the preset button shows which bank of presets
you are currently viewing. Bring in Your Own Music
Use SYNC 3 to play all of your favorite music
from phones, flash drives and other devices.
Plug your device into a USB port, select
Sources
and then choose USB. Wait for
the system to finish indexing your music to
begin listening.
You can even create random playlists by using
the Shuffle function. APPS
Voice Control Your Smartphone Apps
The system supports the use of certain types of
apps such as Spotify
® or Glympse® through a
USB or Bluetooth-enabled devices.
Each app gives you different onscreen options
depending on the app’s content. To find new
apps, use the voice command, “Find new apps”.
For additional support, refer to your SYNC
Supplement, visit the website or call the
toll-free number. See the inside front cover of this
guide for details.
*IF EQUIPPED
COMFORT
*IF EQUIPPED
HEATED OR CLIMATE CONTROLLED
FRONT SEATS *
To use, press the heated or cooled seat
icon(s) repeatedly to cycle through the various
modes and off. More indicator lights indicate
warmer or cooler settings.
Note: You must switch the ignition on to
use these features.
SECOND-ROW HEATED SEATS *
The second-row heated seat controls are on
the rear of the console. Press the heated
control repeatedly to cycle through the various
modes and off.
Note: You must switch the ignition on to
use these features.
ADJUSTABLE PEDALS*
The control is on the left side of the
steering column. Press the arrow to move
the pedals closer to you or the arrow to
move the pedals further away from you. Adjust
the pedals only after you stop your vehicle and
place the transmission in park (P).
HEATED STEERING WHEEL *
Using the touchscreen, press the icon to
switch the feature on and off.
Note: The wood trim does not heat
between the 10 and 2 o’clock positions.
MEMORY FUNCTION *
Use the memory controls on the driver door to
program and then recall the driver seat, power
mirrors, tilt and telescoping steering column*
and the adjustable pedals* position.
To program position 1, press and hold
until
you hear a tone. To set a second position, press
and hold
until the same tone sounds.
You can now use these controls to recall the
set positions.
TILTING HEAD RESTRAINTS
You can adjust the front-row head restraints.
To raise the head restraint, pull up on it.
To lower it, press the head restraint down while
pressing and holding the guide sleeve adjust
and release button.
Tilt the head restraint by gently pulling the top
of it forward. Once the head restraint is in its
forward-most position, tilting it forward once
more releases it to the upright position.
MOONROOF *
The moonroof controls are on the overhead
console and have a one-touch open and
close feature. To stop the moonroof during its
one-touch operation, press the control a
second time.
To open the moonroof, press and release the
SLIDE control. The moonroof will stop short of
the fully opened position. Press and release the
SLIDE control again to fully open the moonroof.
To close the moonroof, pull the SLIDE control.
To vent the moonroof, press and release the
T I LT control. Pull and hold the T I LT control to
close the moonroof.
You can open or close the sliding shade
manually when the moonroof is closed.
AMBIENT LIGHTING *
Light your vehicle interior with a choice
of several colors with the ambient lighting
feature. Use your SYNC 3 touchscreen:
1. Press Settings > Ambient Lighting.
2. Tap a color to activate and set a color for
ambient lighting. Drag the colors up and
down to increase or decrease the intensity.
To switch ambient lighting off, press the active
color once or drag the active color all the way
down to zero intensity.

1514
AUTOWIPERS*
Use the rotary control on the wiper lever to
adjust the sensitivity of the wipers.
When you set the wiper system to intermittent
wipe and the autowiper system is on, the
autowiper sensitivity setting adjusts the wiper
speed according to the moisture on the
windshield only.
Use the wiper lever to wipe the windshield
on-demand.
Note: Make sure you switch this feature
off before entering a car wash.
110-VOLT POWER OUTLET *
The power point is on the back of the center
console. You can use it to power your smaller
electrical devices that do not exceed 150 watts.
This feature is available to use when you switch
on your ignition and the battery voltage is above
11 volts. When the indicator light is on, the
power point is working and ready to use.
CONSOLE REFRIGERATOR
AND FREEZER *
Before using, flip the console lid forward and
then remove the cover to open the cooling
compartment. Make sure to replace the cover
after using it to help maintain a more consistent
cooling temperature.
To use the refrigerator feature, briefly press
and hold the COOL control. The indicator light
on he cool side of the control illuminates. The
temperature cools to approximately 41
o F (5o C).
To use the freezer feature, briefly press and
hold the FREEZE control. The temperature
cools to approximately 23
o F (-5o C).
This feature turns off when you switch the
vehicle off. It turns back on to the last mode
when you restart the vehicle.
Press the selected control again to switch the
system off.
Note: We recommend using this feature
only when the engine is running.
SECURICODE ™ KEYLESS
ENTRY KEYPAD
Allows you to lock or unlock the doors,
program and erase user codes, recall
memory features* and arm or disarm the
anti-theft alarm*. The keypad is near the driver
window and invisible until you touch it. Then, it
lights so you can see and touch the buttons. To get started, you need your five-digit factory
code found on your owner’s wallet card, located
in the glove box. Entering this code unlocks the
driver door. To unlock all of the doors, enter the
factory-set code or your personal code, then
press 3·4 on the keypad within five seconds.
To lock all of the doors, press and hold
7•8 and
9•0 at the same time.
For complete information, refer to the
SecuriCode Keyless Entry Keypad section in
the Locks chapter of your Owner’s Manual.
CONVENIENCE
INTEGRATED KEYHEAD TRANSMITTER AND
INTELLIGENT ACCESS REMOTE ENTRY ICONS*
- Press once to lock all doors. Press again within three seconds to confirm that you locked all of the doors.
- Press
once to unlock the driver door. Press again within three seconds to unlock all doors.
- Press
to activate the panic alarm. Press again or switch on the ignition to deactivate.
- Press
twice within three seconds to open the liftgate.
- Car finder: Press
twice within three seconds to locate your vehicle. The horn sounds and the
lamps flash.
INTELLIGENT ACCESS *
Note: Your intelligent access transmitter must be within 3 feet (1 meter) of the vehicle for intelligent
access to function properly. Pull a front exterior door handle, and the door unlocks. To lock the doors,
press and hold the door handle lock sensor. To unlock and open the liftgate, press the exterior liftgate
release button underneath the liftgate handle and near the license plate\
. The intelligent access
transmitter also contains a mechanical key blade that you can use to unlock the driver door, if necessary.
REMOTE START*
Remote start allows you to start the engine from outside your vehicle us\
ing your transmitter. To start, press
and then press twice within three seconds. Once inside, apply the brake while pressing\
the START STOP
button. Shift into drive (D) and go. If you have an integrated keyhead\
transmitter, insert the key into the ignition
and switch the ignition on as you normally would before driving. To switch the engine off from outside the vehicle
after using your remote start, press
once. Remote start can turn on your climate control. You can personalize
your climate control settings along with other settings within the Information Display. Refer to the Information
Display chapter in your Owner’s Manual for details.
MYKEY®
MyKey allows you to program certain driving restrictions in order to promot\
e good driving habits. You can
program things like speed restrictions, limited volume levels and safety belt reminders. Refer to the MyKey
chapter in your Owner’s Manual for details.
*IF EQUIPPED
CONVENIENCE
15
FLEX
*IF EQUIPPED