2016 FORD FLEX key

54
1 POWER ADJUSTABLE
STEERING COLUMN *
Use the controls to adjust
the steering wheel to your
desired position.
2 CRUISE CONTROL To set your cruise
control speed:
A . Press the ON control up
and release.
B. Accelerate to the
desired speed.
C. Press the SET control up
and release, then take your
foot off the accelerator.
D. To disable, press the OFF
control down.
3 LEFT VEHICLE
INFORMATION DISPLAY Provides information about
various systems on your
vehicle. Use the left, 5-way
controls, located on the
steering wheel, to choose
and confirm settings and
messages. Refer to the
Information Displays chapter
of your Owner’s Manual for
more information.
4 SERVICE ENGINE
SOON LIGHT Illuminates briefly when
you switch the ignition on. If it
remains on or blinks after you
start the engine, the On-Board
Diagnostics system (OBD-II)
has detected a problem. Drive
in a moderate fashion and
contact your authorized dealer
as soon as possible.
5 RIGHT VEHICLE
INFORMATION DISPLAY * Provides information about
various vehicle systems. Use
the right, 5-way controls
located on your steering wheel
to scroll through, highlight and
make minor adjustments within
a selected menu. Refer to the
SYNC Supplement for
more information.
6 STEERING WHEEL
AUDIO AND MEDIA
CONTROLS
Press VOL+ or – to
increase or decrease
volume levels.
Press SEEK
or to
access the next or previous radio station preset, CD
track or preset satellite
radio channel*.
Press
to access
voice recognition.
Press
to connect or
disconnect a phone call.
7 KEYLESS STARTING * Allows you to start your vehicle
by pressing the START STOP
button while fully pressing
down on the brake pedal.
Press the button again to
switch the engine off. If you
leave your vehicle idling for an
extended period of
time, the engine shuts down
automatically. Before this
happens, a message appears
in the information display,
allowing you time to override
the shutdown feature.
Note: Your intelligent
access transmitter* must
be inside the vehicle for the
ignition to start.
8 HAZARD CONTROL
1256 783
4
.
54*IF EQUIPPED
FLEXINSTRUMENT PANELFLEX

98
SYNC® 3*
A REVOLUTIONARY WAY TO CONNECT WITH YOUR VEHICLE. PHONE
After pairing your phone, you can access more
phone-dependent features:
- Recent call lists.
- Contacts: Sort alphabetically and choose a
specific letter to begin viewing your entries.
- Phone settings: Pair another phone, and then
set ring tones and alerts.
- Text messages.
- Do not disturb: Send all calls to your voicemail,
and all ring tones and alerts set to silent mode.
Note: Use the voice commands to make calls.
Say “Call James at home” or “Dial 555-1212”.
You can use the touchscreen to place calls
as well. Refer to your SYNC Supplement for
complete details. NAVIGATION *
Press the navigation* icon to set your destination.
Select one of two ways to find your destination:
- Destination mode lets you key in a specific
address or use a variety of search methods to
locate where you want to go.
- Map mode shows advanced viewing of 2-D
city maps, 3-D landmarks and 3-D city models
(when available).
See your SYNC Supplement for details.
Set a Destination
Press Destination on your touchscreen and
then press Search. Enter a street address,
intersection, city or a point of interest (POI).
You can also use voice commands. Say “Find
a point of interest” and then select a category,
such as hotels or restaurants.
After you choose your destination, press Start.
The system uses a variety of screens and visible
prompts to guide you to your destination.
The navigation map shows your estimated time
of arrival, remaining travel time or the distance
to your destination. Navigation Menu
During active navigation, touch the bottom of
the screen to view the menu, and then select
Screen View.
Choose from the following:
-
Full Map.
- Highway Exit Info displays on the right side of
the touchscreen. View POI icons (restaurants,
ATMs, etc.) as they pertain to each exit. You
can select a POI as a waypoint, if you wish.
- Turn List shows all of the available turns on
your current route.
Traffic List displays SiriusXM Traffic and
Travel Link* information. The system calculates
efficient routes based on available speed limits,
and traffic and road conditions.
FLEX
Use the touchscreen to explore and interact with your vehicle. The
touchscreen works the same way traditional controls, knobs and
buttons do. Press the various areas on your touchscreen to personalize
the many features and settings of your vehicle all in one place. The
system provides easy interaction with your audio, climate, phone,
navigation*, mobile apps and settings.
*IF EQUIPPED
Pair Your Phone with SYNC 3
Pair your phone to SYNC before using SYNC 3.
Make sure that your vehicle is in park (P) and you
switch on your ignition.
- Make sure you switch Bluetooth on and that your
device is discoverable.
- Touch Add Phone on the touchscreen.
- Select SYNC on your device. A six-digit
PIN appears on your device.
- If your device prompts you to enter a PIN, enter
the PIN displayed on the touchscreen. Skip the
next step.
- When prompted on your phone’s
display, confirm that the PIN provided
by SYNC matches the PIN displayed on your
cellular phone.
- The display indicates when the pairing
is successful.
*IF EQUIPPED

1514
AUTOWIPERS*
Use the rotary control on the wiper lever to
adjust the sensitivity of the wipers.
When you set the wiper system to intermittent
wipe and the autowiper system is on, the
autowiper sensitivity setting adjusts the wiper
speed according to the moisture on the
windshield only.
Use the wiper lever to wipe the windshield
on-demand.
Note: Make sure you switch this feature
off before entering a car wash.
110-VOLT POWER OUTLET *
The power point is on the back of the center
console. You can use it to power your smaller
electrical devices that do not exceed 150 watts.
This feature is available to use when you switch
on your ignition and the battery voltage is above
11 volts. When the indicator light is on, the
power point is working and ready to use.
CONSOLE REFRIGERATOR
AND FREEZER *
Before using, flip the console lid forward and
then remove the cover to open the cooling
compartment. Make sure to replace the cover
after using it to help maintain a more consistent
cooling temperature.
To use the refrigerator feature, briefly press
and hold the COOL control. The indicator light
on he cool side of the control illuminates. The
temperature cools to approximately 41
o F (5o C).
To use the freezer feature, briefly press and
hold the FREEZE control. The temperature
cools to approximately 23
o F (-5o C).
This feature turns off when you switch the
vehicle off. It turns back on to the last mode
when you restart the vehicle.
Press the selected control again to switch the
system off.
Note: We recommend using this feature
only when the engine is running.
SECURICODE ™ KEYLESS
ENTRY KEYPAD
Allows you to lock or unlock the doors,
program and erase user codes, recall
memory features* and arm or disarm the
anti-theft alarm*. The keypad is near the driver
window and invisible until you touch it. Then, it
lights so you can see and touch the buttons. To get started, you need your five-digit factory
code found on your owner’s wallet card, located
in the glove box. Entering this code unlocks the
driver door. To unlock all of the doors, enter the
factory-set code or your personal code, then
press 3·4 on the keypad within five seconds.
To lock all of the doors, press and hold
7•8 and
9•0 at the same time.
For complete information, refer to the
SecuriCode Keyless Entry Keypad section in
the Locks chapter of your Owner’s Manual.
CONVENIENCE
INTEGRATED KEYHEAD TRANSMITTER AND
INTELLIGENT ACCESS REMOTE ENTRY ICONS*
- Press once to lock all doors. Press again within three seconds to confirm that you locked all of the doors.
- Press
once to unlock the driver door. Press again within three seconds to unlock all doors.
- Press
to activate the panic alarm. Press again or switch on the ignition to deactivate.
- Press
twice within three seconds to open the liftgate.
- Car finder: Press
twice within three seconds to locate your vehicle. The horn sounds and the
lamps flash.
INTELLIGENT ACCESS *
Note: Your intelligent access transmitter must be within 3 feet (1 meter) of the vehicle for intelligent
access to function properly. Pull a front exterior door handle, and the door unlocks. To lock the doors,
press and hold the door handle lock sensor. To unlock and open the liftgate, press the exterior liftgate
release button underneath the liftgate handle and near the license plate\
. The intelligent access
transmitter also contains a mechanical key blade that you can use to unlock the driver door, if necessary.
REMOTE START*
Remote start allows you to start the engine from outside your vehicle us\
ing your transmitter. To start, press
and then press twice within three seconds. Once inside, apply the brake while pressing\
the START STOP
button. Shift into drive (D) and go. If you have an integrated keyhead\
transmitter, insert the key into the ignition
and switch the ignition on as you normally would before driving. To switch the engine off from outside the vehicle
after using your remote start, press
once. Remote start can turn on your climate control. You can personalize
your climate control settings along with other settings within the Information Display. Refer to the Information
Display chapter in your Owner’s Manual for details.
MYKEY®
MyKey allows you to program certain driving restrictions in order to promot\
e good driving habits. You can
program things like speed restrictions, limited volume levels and safety belt reminders. Refer to the MyKey
chapter in your Owner’s Manual for details.
*IF EQUIPPED
CONVENIENCE
15
FLEX
*IF EQUIPPED