2016 FORD FLEX buttons

98
SYNC® 3*
A REVOLUTIONARY WAY TO CONNECT WITH YOUR VEHICLE. PHONE
After pairing your phone, you can access more
phone-dependent features:
- Recent call lists.
- Contacts: Sort alphabetically and choose a
specific letter to begin viewing your entries.
- Phone settings: Pair another phone, and then
set ring tones and alerts.
- Text messages.
- Do not disturb: Send all calls to your voicemail,
and all ring tones and alerts set to silent mode.
Note: Use the voice commands to make calls.
Say “Call James at home” or “Dial 555-1212”.
You can use the touchscreen to place calls
as well. Refer to your SYNC Supplement for
complete details. NAVIGATION *
Press the navigation* icon to set your destination.
Select one of two ways to find your destination:
- Destination mode lets you key in a specific
address or use a variety of search methods to
locate where you want to go.
- Map mode shows advanced viewing of 2-D
city maps, 3-D landmarks and 3-D city models
(when available).
See your SYNC Supplement for details.
Set a Destination
Press Destination on your touchscreen and
then press Search. Enter a street address,
intersection, city or a point of interest (POI).
You can also use voice commands. Say “Find
a point of interest” and then select a category,
such as hotels or restaurants.
After you choose your destination, press Start.
The system uses a variety of screens and visible
prompts to guide you to your destination.
The navigation map shows your estimated time
of arrival, remaining travel time or the distance
to your destination. Navigation Menu
During active navigation, touch the bottom of
the screen to view the menu, and then select
Screen View.
Choose from the following:
-
Full Map.
- Highway Exit Info displays on the right side of
the touchscreen. View POI icons (restaurants,
ATMs, etc.) as they pertain to each exit. You
can select a POI as a waypoint, if you wish.
- Turn List shows all of the available turns on
your current route.
Traffic List displays SiriusXM Traffic and
Travel Link* information. The system calculates
efficient routes based on available speed limits,
and traffic and road conditions.
FLEX
Use the touchscreen to explore and interact with your vehicle. The
touchscreen works the same way traditional controls, knobs and
buttons do. Press the various areas on your touchscreen to personalize
the many features and settings of your vehicle all in one place. The
system provides easy interaction with your audio, climate, phone,
navigation*, mobile apps and settings.
*IF EQUIPPED
Pair Your Phone with SYNC 3
Pair your phone to SYNC before using SYNC 3.
Make sure that your vehicle is in park (P) and you
switch on your ignition.
- Make sure you switch Bluetooth on and that your
device is discoverable.
- Touch Add Phone on the touchscreen.
- Select SYNC on your device. A six-digit
PIN appears on your device.
- If your device prompts you to enter a PIN, enter
the PIN displayed on the touchscreen. Skip the
next step.
- When prompted on your phone’s
display, confirm that the PIN provided
by SYNC matches the PIN displayed on your
cellular phone.
- The display indicates when the pairing
is successful.
*IF EQUIPPED

1110
SYNC® 3* FLEX
A REVOLUTIONARY WAY TO CONNECT WITH YOUR VEHICLE.
CLIMATE
Access climate control features, including
the temperature, airflow direction, fan speed
and other climate features for you and your
front passenger.
Set Your Temperature
- Touch the Climate icon on the touchscreen.
- Use voice commands to change your settings,
like “Climate set temperature to 72 degrees”
and SYNC 3 makes that adjustment.
- You can also use the ▲ or ▼ buttons on
the touchscreen.
ENTERTAINMENT
No matter how you store your music, SYNC 3
makes it yours to enjoy when you’re behind the
wheel. Press the Audio icon on the touchscreen,
and from here, you can easily go between

AM/FM, SiriusXM and other media sources.
Set Your Radio Presets
- Tune to the station and then press and hold
one of the memory preset buttons. The audio
mutes briefly while the system saves the
station, and then the audio returns.
- Two preset banks are available for AM and
three banks for FM. To access additional
presets, tap the preset button. The indicator on
the preset button shows which bank of presets
you are currently viewing. Bring in Your Own Music
Use SYNC 3 to play all of your favorite music
from phones, flash drives and other devices.
Plug your device into a USB port, select
Sources
and then choose USB. Wait for
the system to finish indexing your music to
begin listening.
You can even create random playlists by using
the Shuffle function. APPS
Voice Control Your Smartphone Apps
The system supports the use of certain types of
apps such as Spotify
® or Glympse® through a
USB or Bluetooth-enabled devices.
Each app gives you different onscreen options
depending on the app’s content. To find new
apps, use the voice command, “Find new apps”.
For additional support, refer to your SYNC
Supplement, visit the website or call the
toll-free number. See the inside front cover of this
guide for details.
*IF EQUIPPED
COMFORT
*IF EQUIPPED
HEATED OR CLIMATE CONTROLLED
FRONT SEATS *
To use, press the heated or cooled seat
icon(s) repeatedly to cycle through the various
modes and off. More indicator lights indicate
warmer or cooler settings.
Note: You must switch the ignition on to
use these features.
SECOND-ROW HEATED SEATS *
The second-row heated seat controls are on
the rear of the console. Press the heated
control repeatedly to cycle through the various
modes and off.
Note: You must switch the ignition on to
use these features.
ADJUSTABLE PEDALS*
The control is on the left side of the
steering column. Press the arrow to move
the pedals closer to you or the arrow to
move the pedals further away from you. Adjust
the pedals only after you stop your vehicle and
place the transmission in park (P).
HEATED STEERING WHEEL *
Using the touchscreen, press the icon to
switch the feature on and off.
Note: The wood trim does not heat
between the 10 and 2 o’clock positions.
MEMORY FUNCTION *
Use the memory controls on the driver door to
program and then recall the driver seat, power
mirrors, tilt and telescoping steering column*
and the adjustable pedals* position.
To program position 1, press and hold
until
you hear a tone. To set a second position, press
and hold
until the same tone sounds.
You can now use these controls to recall the
set positions.
TILTING HEAD RESTRAINTS
You can adjust the front-row head restraints.
To raise the head restraint, pull up on it.
To lower it, press the head restraint down while
pressing and holding the guide sleeve adjust
and release button.
Tilt the head restraint by gently pulling the top
of it forward. Once the head restraint is in its
forward-most position, tilting it forward once
more releases it to the upright position.
MOONROOF *
The moonroof controls are on the overhead
console and have a one-touch open and
close feature. To stop the moonroof during its
one-touch operation, press the control a
second time.
To open the moonroof, press and release the
SLIDE control. The moonroof will stop short of
the fully opened position. Press and release the
SLIDE control again to fully open the moonroof.
To close the moonroof, pull the SLIDE control.
To vent the moonroof, press and release the
T I LT control. Pull and hold the T I LT control to
close the moonroof.
You can open or close the sliding shade
manually when the moonroof is closed.
AMBIENT LIGHTING *
Light your vehicle interior with a choice
of several colors with the ambient lighting
feature. Use your SYNC 3 touchscreen:
1. Press Settings > Ambient Lighting.
2. Tap a color to activate and set a color for
ambient lighting. Drag the colors up and
down to increase or decrease the intensity.
To switch ambient lighting off, press the active
color once or drag the active color all the way
down to zero intensity.

1312
THIRD-ROW SEAT*
To Fold and Stow the Third-Row Seat
Note: Make sure that the area under the seat is free of objects
before stowing it.
1) Remove all objects from the seat and floor stowage tub area.
2) Fold the head restraint by pulling the head restraint release strap.
3) From the rear of the vehicle, fold the seatback by pulling and holding
the red strap while pushing the seatback forward. Release the strap
once the seatback starts rotating forward. 4)
To fold the seat fully into the floor, release the seat latches by pulling
and holding the short black strap and then pulling the headrest
release strap. This tumbles the seat all the way into the floor tub.
COMFORTFLEX
*IF EQUIPPED
COMFORT
To Unstow the Third-Row Seat
Note: Make sure that the forward portion of the load floor is free
of objects before unstowing it.
1) Unlatch and lift the seat out of the tub in the floor by squeezing and
pulling up on the handle. When the seat is in a vertical position, push
the seat over, letting it fall onto the latches.
2) To return the seatback to the upright position, pull the red strap.
Then, while holding the red strap, pull the long strap located on the
seatback to raise the seatback.
3) Pull the head restraints up to their normal position.
Note: Push and pull on the seat to make sure it latches to the
vehicle floor. An unlatched seat may become dangerous in
the event of a sudden stop or crash.
POWERFOLD® THIRD-ROW SEAT *
Note: The powerfold seats work only when the vehicle is in
park (P) and the liftgate is open.
The third-row seat features a power one-touch operation that allows
you to adjust the seats with the touch of a button. The buttons are
behind the third-row seats on the left-side, quarter-trim panel. To use, press the RH/BOTH/LH
button to select the right seat, both
seats or the left seat that you want to move.
Then select the desired seat position:
- Press the STOW button to stow the
seat into the tub floor.
- Press the FOLD button (the top
portion of the button) to fold down
the seatback.
- Press the NORMAL button to return the seat to the normal
seating position.
POWER LIFTGATE *
Your liftgate has an automatic open and close feature. To open remotely,
press twice on your remote within three seconds. Press twice
again to close or reverse the movement. You can also operate the
liftgate by pressing the
button on the instrument panel.
*IF EQUIPPED

1514
AUTOWIPERS*
Use the rotary control on the wiper lever to
adjust the sensitivity of the wipers.
When you set the wiper system to intermittent
wipe and the autowiper system is on, the
autowiper sensitivity setting adjusts the wiper
speed according to the moisture on the
windshield only.
Use the wiper lever to wipe the windshield
on-demand.
Note: Make sure you switch this feature
off before entering a car wash.
110-VOLT POWER OUTLET *
The power point is on the back of the center
console. You can use it to power your smaller
electrical devices that do not exceed 150 watts.
This feature is available to use when you switch
on your ignition and the battery voltage is above
11 volts. When the indicator light is on, the
power point is working and ready to use.
CONSOLE REFRIGERATOR
AND FREEZER *
Before using, flip the console lid forward and
then remove the cover to open the cooling
compartment. Make sure to replace the cover
after using it to help maintain a more consistent
cooling temperature.
To use the refrigerator feature, briefly press
and hold the COOL control. The indicator light
on he cool side of the control illuminates. The
temperature cools to approximately 41
o F (5o C).
To use the freezer feature, briefly press and
hold the FREEZE control. The temperature
cools to approximately 23
o F (-5o C).
This feature turns off when you switch the
vehicle off. It turns back on to the last mode
when you restart the vehicle.
Press the selected control again to switch the
system off.
Note: We recommend using this feature
only when the engine is running.
SECURICODE ™ KEYLESS
ENTRY KEYPAD
Allows you to lock or unlock the doors,
program and erase user codes, recall
memory features* and arm or disarm the
anti-theft alarm*. The keypad is near the driver
window and invisible until you touch it. Then, it
lights so you can see and touch the buttons. To get started, you need your five-digit factory
code found on your owner’s wallet card, located
in the glove box. Entering this code unlocks the
driver door. To unlock all of the doors, enter the
factory-set code or your personal code, then
press 3·4 on the keypad within five seconds.
To lock all of the doors, press and hold
7•8 and
9•0 at the same time.
For complete information, refer to the
SecuriCode Keyless Entry Keypad section in
the Locks chapter of your Owner’s Manual.
CONVENIENCE
INTEGRATED KEYHEAD TRANSMITTER AND
INTELLIGENT ACCESS REMOTE ENTRY ICONS*
- Press once to lock all doors. Press again within three seconds to confirm that you locked all of the doors.
- Press
once to unlock the driver door. Press again within three seconds to unlock all doors.
- Press
to activate the panic alarm. Press again or switch on the ignition to deactivate.
- Press
twice within three seconds to open the liftgate.
- Car finder: Press
twice within three seconds to locate your vehicle. The horn sounds and the
lamps flash.
INTELLIGENT ACCESS *
Note: Your intelligent access transmitter must be within 3 feet (1 meter) of the vehicle for intelligent
access to function properly. Pull a front exterior door handle, and the door unlocks. To lock the doors,
press and hold the door handle lock sensor. To unlock and open the liftgate, press the exterior liftgate
release button underneath the liftgate handle and near the license plate\
. The intelligent access
transmitter also contains a mechanical key blade that you can use to unlock the driver door, if necessary.
REMOTE START*
Remote start allows you to start the engine from outside your vehicle us\
ing your transmitter. To start, press
and then press twice within three seconds. Once inside, apply the brake while pressing\
the START STOP
button. Shift into drive (D) and go. If you have an integrated keyhead\
transmitter, insert the key into the ignition
and switch the ignition on as you normally would before driving. To switch the engine off from outside the vehicle
after using your remote start, press
once. Remote start can turn on your climate control. You can personalize
your climate control settings along with other settings within the Information Display. Refer to the Information
Display chapter in your Owner’s Manual for details.
MYKEY®
MyKey allows you to program certain driving restrictions in order to promot\
e good driving habits. You can
program things like speed restrictions, limited volume levels and safety belt reminders. Refer to the MyKey
chapter in your Owner’s Manual for details.
*IF EQUIPPED
CONVENIENCE
15
FLEX
*IF EQUIPPED