2016 FORD F150 climate control

GET IN TOUCH USING
YOUR TOUCHSCREEN
GENERAL TIPS
• Press the home icon at any time
to return to your home screen.
• Large icons are easy to use.
• For a list of commonly used voice
commands and additional support
(including toll-free phone numbers
and websites), see the inside
front cover.
A REVOLUTIONARY WAY TO CONNECT WITH YOUR TRUCK
GETTING STARTED, UNDERSTANDING SYNC 3
Use the touchscreen to explore and interact with your vehicle. The touchscreen works the same way traditional controls, knobs and
buttons do. Press the various areas on your touchscreen to personalize the many features and settings of your vehicle all in one
place. The system provides easy interaction with your audio, climate, phone, navigation*, mobile apps and settings.
12 – 13
PAIRING YOUR PHONE
WITH SYNC 3
• Pair your phone before using SYNC 3. Make
sure that your vehicle is in park (P), and you
switch on your vehicle's ignition.
• Make sure you switch Bluetooth on and that
your device is discoverable.
• Touch Add Phone on the touchscreen.
• Select SYNC on your device. A six-digit PIN
appears on your device.
• If your device prompts you to enter a PIN,
enter the PIN displayed on the touchscreen.
Skip the next step.
• When prompted on your phone’s display,
confirm that the PIN provided by SYNC
matches the PIN displayed on your
cellular phone.
• The display indicates when the pairing
is successful.
PHONE
After pairing your phone, you can access more phone-dependent features:
Your phone connects you with other features:
• Recent call lists.
• Contacts: Sort alphabetically and choose a specific letter to begin viewing your entries.
• Phone settings: Pair another phone, and set ring tones and alerts.
• Text messages.
• Do not disturb: Send all calls to your voice mail, and all ring tones and alerts set to
silent mode.
Note: Use the voice commands to make calls. Say “Call James at home” or “Dial
555-1212”. You can use the touchscreen to place calls as well. Refer to the SYNC
Supplement for complete details.
*if equipped
SYNC
® 3*
*if equipped

NAVIGATION*
Press the navigation* icon to set your destination. Select one of two ways to find
your destination:
• Destination mode lets you key in a specific address or use a variety of search
methods to locate where you want to go.
• Map mode shows advanced viewing of 2-D city maps, 3-D landmarks and 3-D city
models (when available).
See your SYNC Supplement for details. SET A DESTINATION
Press Destination on your touchscreen and then press Search. Enter a street
address, intersection, city or a point of interest (POI).
You can also use voice commands. Say “Find a point of interest” and then select a
category, such as hotels or restaurants.
After you choose your destination, press Start. The system uses a variety of screens
and visible prompts to guide you to your destination.
The navigation map shows your estimated time of arrival, remaining travel time or
the distance to your destination.
NAVIGATION MENU
During active navigation, touch the bottom of the screen to view the menu, and
then select Screen View.
•
Full Map.
• Highway Exit Info displays on the right side of the touchscreen. View POI icons
(restaurants, ATMs, etc.) as they pertain to each exit. You can select a POI as a
waypoint, if you wish.
• Turn List shows all of the available turns on your current route.
• Traffic List displays SiriusXM Traffic and Travel Link* information. The system
calculates efficient routes based on available speed limits, and traffic and
road conditions.
SYNC
® 3*
14 – 15
CLIMATE
Access climate control features, including the temperature, airflow direction, fan
speed and other climate features for you and your front passenger.
SET YOUR TEMPERATURE
• Touch the Climate icon on the touchscreen.
• Use voice commands to change your settings, like “Climate set temperature
to 72 degrees” and SYNC 3 makes that adjustment.
• You can also use the ▲ or ▼ buttons on the touchscreen.
APPS
VOICE CONTROL YOUR SMARTPHONE APPS
The system supports the use of certain types of apps such as Pandora
® or
iHeartRadio® through USB or Bluetooth-enabled devices.
Each app gives you different onscreen options depending on the app’s content.
To find new apps, use the voice command, "Find new apps".
For more information, refer to the SYNC Supplement. For support, visit the
website or call the toll-free number. See the inside front cover of this guide
for details.
*if equipped*if equipped

CLIMATE CONTROLLED FRONT SEATS*
To operate the heated feature, press
repeatedly to
cycle through the various settings and off.
To operate the cooled feature, press
repeatedly to
cycle through the various settings and off. The cooled
seats will function only when the engine is running.
Note: More lights indicate higher settings.
REAR HEATED SEATS*
The rear-seat heat controls are on the back of the center console. To operate the
heated seats, press
repeatedly to cycle through the various settings and off.
The indicator light illuminates when you switch the heated seats on.
Note: When the ignition is in the on position, press the heated seat switch to
enable heating mode. The heated seats turn off automatically when you switch
off the engine. OVERHEAD CONSOLE*
From right to left, the controls operate the following functions:
Driver Lighting Controls

Driver map lamp: Press to switch on and off.
Overhead dome light: Press to switch on and off.
Door open overhead dome light: Press to override the dome lamp
automatically turning on.
Moonroof Controls*

Moonroof open button: Press to open. The moonroof stops short of the fully
opened position. To open the moonroof fully, press the open button again.

Moonroof close button: Press to close.

Moonroof vent button: Press to vent.
Sunshade Controls*

Sunshade open button: Press to open. The sunshade opens automatically
with the moonroof. You can also open the sunshade with the
moonroof closed.

Sunshade close button: Press to close.
Note: The sunshade stops short of a full-open
position for the comfort of rear passengers. To
open the sunshade fully, press the control again.
Passenger Lighting Control
Passenger map lamp: Press to switch on
and off.
Function
18 – 19
Comfort
360-DEGREE CAMERA*
The system consists
of front, side and
rear cameras. Press
the control to toggle
through different
camera views to see:
• What is directly in front or behind your vehicle.
• Cross traffic view in front and behind your vehicle.
Refer to the Parking Aids chapter in your Owner’s
Manual for more information.
REAR SENSING SYSTEM*
This system can warn you if there is an object behind
the vehicle. A warning tone sounds and increases in
frequency as you get closer to the object. It sounds a
continuous warning when the object is less than
12 inches (30 cm) away. The system is not effective
when the vehicle is traveling above 3 mph (5 km/h)
and may not detect angular or moving objects.
Note: Visibility aids do not replace the need to
watch where the vehicle is moving. Refer to your
Owner’s Manual for safety information, more
details and limitations. MYKEY
®
MyKey allows you to program certain driving
restrictions in order to promote good driving habits.
You can program speed restrictions, limited volume
levels and more, depending on your vehicle's level of
equipment. For complete information, refer to the
MyKey chapter in your Owner’s Manual.
ACTIVE PARK ASSIST*
The system detects an available parallel parking
space and automatically steers the vehicle into the
space (hands-free) while you control the accelerator,
gearshift and brakes. The system visually and audibly
instructs you to park your vehicle.
To use active park assist, press the button

located on the center console near the gearshift lever.
To stop the parking procedure, grab the steering wheel
or press the control again. Before using this feature
and for complete information, refer to the Parking
Aids chapter of your Owner’s Manual.
Note: The driver is always responsible for controlling
the vehicle, supervising the system, and intervening,
if required. LANE KEEPING SYSTEM*
The system notifies you to stay in your lane through
the steering system and the instrument cluster display
when the front camera detects an unintentional
drift out of your lane is likely to occur. The system
automatically detects and tracks the road lane
markings using a camera mounted behind the interior
rear view mirror.
Press the button
located on the center console
to switch the system on or off.
BLIS
® (BLIND SPOT
INFORMATION SYSTEM)
AND CROSS TRAFFIC ALERT*
BLIS aids you in detecting vehicles that may have
entered into your blind spot zone. The cross traffic
alert feature warns you of vehicles approaching from
the sides when the transmission is in reverse (R).
BLIS and cross traffic alert will display a yellow
indicator light in your exterior mirrors. Cross traffic
alert will also sound tones and display messages to
warn you which direction vehicles are approaching.
Refer to the Driving Aids chapter in your Owner’s
Manual for more information.
*if equipped
*if equipped*if equipped