HANDS-FREE FUNCTION
QUICK GUIDE
To start using the hands-free function
with voice recognition andBluetooth®
technology provided byBlue&Me™:
❒Make sure that the ignition key is
turned toMAR
❒Practise the voice commands
❒Register your mobile phone
❒Make a call.
Preparing your mobile phone
phonebook
Before pairing your mobile phone with
Blue&Me™, you must make sure
you have stored the names you want to
contact in the phonebook on your
mobile phone so that you can call them
using the car's hands-free system.
If your phonebook does not contain any
names, enter new names for the most
frequently used numbers. For further
details, consult your mobile phone
manual.
IMPORTANT
❒Access to the phonebook copied to
Blue&Me™is possible only when
the mobile phone from which it was
copied is connected.❒Entries stored in the SIM card or
mobile phone memory can be
transferred toBlue&Me™with different
procedures, depending on your mobile
phone model.
Getting to know the voice
commands
When talking to the system, you can
always use the voice command "Help",
to obtain detailed instructions on the
voice commands available for each
stage of interaction.
To practise the "Help" command
proceed as follows:
❒Press the
control on the steering
wheel.
❒AfterBlue&Me™has given an
acoustic signal to indicate that voice
recognition is active, say "Help".
Blue&Me™will give the list of voice
commands available.
❒At the end of the help message, say
"Settings" and, at the end of the
message, "Help".Blue&Me™will give
the list of voice commands available
for the Settings menu.
❒You can now give one of the available
commands and proceed with the
dialogue as you wish.
❒If you need further help press
and
say "Help".Pairing your mobile phone
IMPORTANT This operation should be
carried out only with the vehicle
stationary.
To pair your mobile phone, proceed as
follows:
❒Press
and say "Settings" and
then, at the end of the message from
Blue&Me™, say "User pairing".
❒The system will show a code number
(PIN) on the instrument panel display,
which is used for the pairing procedure.
For the two subsequent stages,
consult your mobile phone manual.
❒Look for devices with Bluetooth®
technology on your mobile phone (the
setting on your mobile phone could
be called Search or New Device). Find
“Blue&Me” in this list (the name that
identifies theBlue&Me™system
in your vehicle) and select it.
❒When prompted, enter the PIN code
displayed on the instrument panel
using your mobile phone keypad. If
pairing is successful, the system will
say "Connecting" and at the end the
display will show, as confirmation,
details of the mobile phone paired.
185
It is important to wait for this
confirmation message; if you press the
right
/wheel before it appears,
you risk cancelling the pairing process.
If the registration fails, an error message
will appear; in this case, you will need
to repeat the procedure.
❒After pairing your mobile phone, the
first time you connect,Blue&Me™
will say "Welcome". This message will
no longer be heard at subsequent
pairing or connecting procedures.
❒Blue&Me™asks you if you want to
copy the phonebook of the mobile
phone just paired onto theBlue&Me™
system. You are advised to copy it. To
proceed with copying, say "Ye s"; if you
do not want to copy the phonebook,
say "No".
❒On some mobile phones, the names
in the phonebook are not copied
automatically, but have to be
transferred by using the mobile phone
keypad. IfBlue&Me™asks you, carry
out this procedure by following the
specific instructions on your mobile
phone and press the rightSRC/OK
wheel when you have finished.Making a phone call
Imagine that "John" is one of the
names saved in your phonebook.
To call John, proceed as follows:
❒Press the
control on the steering
wheel and say "Call John".
❒If the system recognises the name
John, the relevant information will
be shown on the display.
If your phonebook has only one number
stored for John, the system will ask
you directly if you want to call him. To
make the call, say "Ye s"; otherwise, say
"No".
If, on the other hand, there are several
phone numbers for John, the system
will ask which one you wish to call
(for example, "Call John work
or home?"). Respond by indicating
which number you want to call (for
example, "Home").If John has several phone numbers but
the type of phone number is missing,
the system will display the selected
contact and a list of related phone
numbers. The hands-free system will
ask if you would like to call the phone
number displayed. If the number
displayed is the one you wish to call,
say "Ye s"; otherwise, say “No". If
the person to contact is the correct
one, but the number is wrong, say
"Forward"or"Back" to see the other
phone numbers for this person.
To call the number displayed, say
"Call". You can also navigate through
this list manually by turning the right
/wheel until you find the desired
number. At this point, press
to make
the call.
❒To end the call, press
.
SMS MESSAGE READER
QUICK GUIDE
(only for phones which support this
function)
If yourBluetooth® phone supports
this function, when a new SMS mes-
sage is receivedBlue&Me™will notify
you through an acoustic signal and ask
you if you want to read it.
❒Say "Ye s" or press the rightSRC/OK
wheel, and the system will read the
last message received.
186
MULTIMEDIA
