2016 FIAT FULLBACK child seat

SUITABILITY FOR ISOFIX AND OTHER SEATING POSITIONS
Suitability for ISOFIX positions
Double cab
Mass Group Size classISOFIX positions
Rear Outboard
CarrycoatISO/L1 X
ISO/L2 X
0 — Up to 10 kg ISO/R1 X
0+—Upto13kgISO/R1 X
ISO/R2 X
ISO/R3 X
1—9to18kgISO/R2 X
ISO/R3 X
ISO/F2 IUF
ISO/F2X IUF
ISO/F3 IUF
II&III—15to36kgX
141)
Definition of characters to be inserted in the table above:
IUF — Suitable for ISOFIX forward child restraints systems of universal category approved for use in the mass group.
X — ISOFIX position not suitable for ISOFIX child restraint systems in this mass group.
Important note:
Front passenger seat is NOT suitable for rearward facing child restraint system when the passenger airbag is active. It is
suitable for universal child restraint system when the airbag has been disabled (refer to “Supplemental restraint system —
Airbag”).
110
SAFETY

Mass GroupSeating positions — Bench seat
Front Passenger Front centre
With Airbag Without Airbag
0—Upto10kg X U X
0+—Upto13kg X U X
1—9to18kg UF U X
II & III —15 to 36 kg UF U X
141) 143)
Definition of characters to be inserted in the table above:
U — Suitable for “universal” category restraints approved for use in this mass group.
UF — Suitable for front-facing “universal” category restraints approved for use in this mass group.
X — Seat position not suitable for child restraint systems in this mass group.
Important note:
Front passenger seat is NOT suitable for rearward facing child restraint system when the passenger airbag is active. It is
suitable for universal child restraint system when the airbag has been disabled (refer to “Supplemental restraint system —
Airbag”).
112
SAFETY

Suitability for various seating positions
CLUB CAB
Mass GroupSeating Position
Front Passenger Rear Outbord
With Airbag Without Airbag
0—Upto10kg X U X
0+—Upto13kg X U X
1—9to18kg UF U X
II & III —15 to 36 kg UF U X
141)
Definition of characters to be inserted in the table above:
U — Suitable for “universal” category restraints approved for use in this mass group.
UF — Suitable for front-facing “universal” category restraints approved for use in this mass group.
X — Seat position not suitable for child restraint systems in this mass group.
Important note:
Front passenger seat is NOT suitable for rearward facing child restraint system when the passenger airbag is active. It is
suitable for universal child restraint system when the airbag has been disabled (refer to “Supplemental restraint system —
Airbag”).
113

Suitability for various seating positions
DOUBLE CAB
Mass GroupSeating Position
Front Passenger Rear Outbord Rear Centre
With Airbag Without Airbag3-point type seat
belt2-point type seat
belt
0—Upto10kg X U U U X
0+—Upto13kg X U U U X
1—9to18kg UF U U U X
II & III —15 to 36 kg UF U U U X
141)
Definition of characters to be inserted in the table above:
U — Suitable for “universal” category restraints approved for use in this mass group.
UF — Suitable for front-facing “universal” category restraints approved for use in this mass group.
X — Seat position not suitable for child restraint systems in this mass group.
Important note:
Front passenger seat is NOT suitable for rearward facing child restraint system when the passenger airbag is active. It is
suitable for universal child restraint system when the airbag has been disabled (refer to “Supplemental restraint system —
Airbag”).
114
SAFETY

Child restraint
anchorage points
(Double cab)
(where provided)
When fitting a child restraint, always
follow the manufacturer’s instructions
using the approved anchorage points
shown and install the child restraint
fitting package.
Anchorage locations
Two child restraint anchorage points are
built into the vehicle and are located on
the vertical panel behind the rear
seatback.
68)
Tether anchor strap installation
142)
1 — Remove the head restraint from
the location in which you wish to install
a child restraint.
2 — Drop the child restraint’s tether
strap (A) down the back of the rear
seatback.
3 — Tip the armrest forward. Open the
fastener (B) that’s located in the space
where the armrest was stowed.4 — Open the inner cover.
5 — Put your hand in the opening of
the fastener, attach the tether strap’s
hook (C) to the tether anchorage (D),
and securely tighten the tether strap.
189AHA104759
A
190AHA104762
B
191AHA104775
192AHA106157
115

Installing a child
restraint system to the
lower anchorage
(ISOFIX child restraint mountings of
Double cab)
143)
Your vehicle’s rear seat is fitted with
lower anchorages for attaching a child
restraint system with ISOFIX mountings.
Child restraint systems
with ISOFIX mountings
(Double cab)
(where provided)
The child restraint system is designed
only for seats that incorporate lower
anchorages. Retain the child restraint
system using the lower anchorages.
It is not necessary to retain the child
restraint system using the vehicle’s seat
belts.
A. Child restraint system connectors
To install
1. Remove any foreign material in or
around the connectors and ensure the
vehicle seat belt is in its normal storage
position.
2. Remove the head restraint from the
location in which you wish to install a
child restraint. Refer to “Head
restraints”.3. Open the gap a little between the
seat cushion (A) and the seatback (B)
with your hand to locate the lower
anchorages (C).
4. Push the child restraint system’s
connectors (D) into the lower
anchorages (C) in accordance with the
instructions provided by the child
restraint system’s manufacturer.
A. Vehicle seat cushion
B. Vehicle seaback
C. Lower anchorage
D. Connector
If your child restraint system requires
the use of a tether strap, fasten the
tether strap in accordance with step 5.
5. Latch the top tether strap hook (E) of
the child restraint system to the tether
anchor bracket (F) and tighten the top
tether strap so it is securely fastened.
D
C
193AHA104788
194AHA106607
A
195AA0014302
CA
D
B
196AG0025140
116
SAFETY

If it is difficult to latch the tether strap
hook, turn the hook sideways.
6. Push and pull the child restraint
system in all directions to be sure it is
firmly secured.
To remove
Remove the child restraint system in
accordance with the instructions
provided by the child restraint system’s
manufacturer.
Installing a child restraint system to
a 3-point type seat belt (with
emergency locking mechanism)
Installation
1. Put a child restraint system on the
seat in which you wish to install it and
remove the head restraint from the seat.
Refer to “Head restraints”.
2. Route the belt through the child
restraint according to the child restraint
system manufacturer’s instructions,then insert the latch plate into the
buckle.
3. Remove all slack of a lap belt by
pulling the webbing through the belts
adjustment feature. 3 point type seat
belt requires no length adjustment,
remove all slack by using the locking
clip (A).
4. Before putting the child in the
restraint, push and pull the child
restraint in all directions to be sure it is
secure. Do this before each use.
144)
WARNING
141)When installing a child restraint
system, remove the head restraint from the
seat.142)Child restraint anchorages are
designed to withstand only those loads
imposed by correctly fitted child restraints.
Under no circumstances are they to be
used for adult seat belts, harnesses, or for
attaching other items or equipment to the
vehicle.
143)When installing a child restraint
system on the separate seat, adjust the
seatback angle to 1 step rearward from the
first locking position.
144)For some type of child restraint, the
locking clip (A) should be used to help
avoid personal injury during a collision or
sudden manoeuvre. It must be fitted and
used in accordance with the child restraint
manufacturer’s instructions. The locking
clip must be removed when the child
restraint is removed.
IMPORTANT
68)The anchorages are only applicable for
child restraints fitted in the seat.
F
E
197AHA105671
A
198AA0008772
117

temporary irritation from chemicals
used to produce the deployment; open
the windows after airbag deployment, if
safe to do so.
The airbags deflate very rapidly after
deployment, so there is little danger of
obscured vision.
145) 146) 147) 148) 149) 150) 151) 152)
Caution for installing the child
restraint on vehicle with front
passenger’s airbag
The label shown here is attached on
vehicles with front passenger’s airbag.
153)
NOTE The labels may be in different
positions depending on the vehicle
model.
Driver’s and front passenger’s
airbag system
The driver’s airbag is located under the
padded cover in the middle of the
steering wheel. The front passenger’s
airbag is contained in the instrument
panel above the glove box.
The driver’s airbag inflates at two
different rates according to the severity
of the impact (if so equipped).
The driver’s airbag and the front
passenger’s airbag are designed toinflate at the same time even if the
passenger seat is not occupied.
Driver’s knee airbag system*
The driver’s knee airbag is located
under the steering wheel. The driver’s
knee airbag is designed to deploy at the
same time as the driver’s front airbag.201AF0009484
202AHA100605
203AHA105668
204AA0001988
205AHA105697
119