2016 DODGE JOURNEY fold seats

Seven Passenger System Features
•A large built-in storage bin with a hinged hardcover
located in the floor behind the third-row passenger
seats.
• 60/40 split second-row passenger seats with fold flat
feature, which allows for extended cargo space. Refer
to “Seats” in “Understanding The Features Of Your
Vehicle” for further information.
• 50/50 split third-row passenger seats with fold flat
feature, which allows for extended cargo space. Refer
to “Seats” in “Understanding The Features Of Your
Vehicle” for further information.
• An optional front passenger seat with fold flat feature,
which extends cargo space even further. Refer to
“Seats” in “Understanding The Features Of Your Ve-
hicle” for further information.
• Cargo tie-downs.
Cargo Tie-Downs
WARNING!
Cargo tie-downs are not safe anchors for a child seat
tether strap. In a sudden stop or collision, a tie-down
could pull loose and allow the child seat to come
loose. A child could be badly injured. Use only the
anchors provided for child seat tethers.
Cargo tie-downs are located on both rear trim panels.
These tie-downs should be used to secure loads safely
when the vehicle is moving.
284 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Preparations For Jacking
1. Park the vehicle on a firm, level surface as far from theedge of the roadway as possible. Avoid icy or slippery
areas.
WARNING!
Do not attempt to change a tire on the side of the
vehicle close to moving traffic. Pull far enough off
the road to avoid the danger of being hit when
operating the jack or changing the wheel.
2. Turn on the Hazard Warning flashers.
3. Set the parking brake.
4. Place the shift lever in PARK.
5. Turn OFF the ignition. 6. Block both the front and rear of the wheel diagonally
opposite of the jacking position. For ex-
ample, if changing the right front tire,
block the left rear wheel.
NOTE: Passengers should not remain in the vehicle
when the vehicle is being jacked.
Spare Tire Removal
NOTE: On seven-passenger models, fold the third-row
passenger seats flat. This will provide more space when
accessing the jacking tools and when operating the winch
mechanism.
1. Remove the jack-handle components 1, 2 and 3 from storage and assemble them.
534 WHAT TO DO IN EMERGENCIES

Distribution Center (Fuses)................602
Door Locks ............................31
Inverter ............................. .272
Mirrors ............................. .121
Outlet (Auxiliary Electrical Outlet) ...........268
Seats ............................... .199
Steering .......................... .444, 445
Sunroof ............................. .264
Transfer Unit ......................... .592
Windows ..............................41
Power Seats Down .............................. .200
Forward ............................. .200
Rearward ............................ .200
Up ................................ .200
Power Steering Fluid ...................... .618
Power Transfer Unit ....................592, 618
Pregnant Women And Seat Belts ...............57
Preparation For Jacking .....................534 Pretensioners
Seat Belts ..............................57
Programming Transmitters (Remote Keyless Entry) . .21
Radial Ply Tires ......................... .478
Radiator Cap (Coolant Pressure Cap) ...........583
Radio Frequency General Information ............15, 18, 26, 29, 40
Radio Operation ......................... .387
Radio Remote Controls .....................385
Rear Air Conditioning ...................397, 411
Rear Axle (Differential) .....................591
Rear Camera ........................... .250
Rear Cupholder ......................... .274
Rear Drive Assembly ...................... .591
Rear Liftgate .............................44
Rear ParkSense System .....................242
Rear Seat, Folding .....................213, 220
Rear Window Defroster .....................290
652 INDEX