2016 DODGE JOURNEY center console

Power Inverter Operation
The power inverter is turned On and Off using the
Uconnect System.
Vehicles Equipped With Uconnect 4.3
To turn the power inverter on or off perform the follow-
ing:
1. Press the “More” button on the faceplate (located nextto the Uconnect display).
2. Press the “Outlet” button on the touchscreen (located on the Uconnect display) to turn the power inverter
On or Off.
Vehicles Equipped With Uconnect 8.4 And 8.4 Nav
To turn the power inverter on or off perform the follow-
ing:
1. Press the “Controls” button on the touchscreen. 2. Press the “Outlet” button on the touchscreen to turn
the power inverter On or Off.
CUPHOLDERS
There are two cupholders, located in the center floor
console, for the front passengers.
Floor Console Cupholders
274 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Floor Console Storage
An open storage area, or cubby bin, is located in the floor
console.
Center Console Storage
There is a storage tray and storage compartment located
under the center console armrest.
Pull upward on the release handle, located on the front of
the lid, to gain access to the storage tray and storage
compartment.
Floor Console Cubby BinCenter Console
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 277

The storage tray can be slid forward and rearward or
removed to access the center console storage compart-
ment.WARNING!
Do not operate this vehicle with a console compart-
ment lid in the open position. Driving with the
console compartment lid open may result in injury in
a collision.
Center Console Storage TrayCenter Console Storage Compartment
278 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Sliding Armrest
The center console armrest can also slide rearward for
easy access to the storage area.
WARNING!
Do not operate this vehicle with a console compart-
ment lid in the open position. Driving with the
console compartment lid open may result in injury in
a collision.
Flip ’n Stow Front Passenger Seat Storage — If
Equipped
The seat latch release-loop is located in the center of the
seat cushion between the seat cushion and the seatback.
Pull the loop upward to release the latch and then
forward to open the seat to the detent position.
Sliding Armrest
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 279

3. Ensure the VES Remote Control and the Headphoneswitch is on Channel 1.
Using The Remote Control
1. Push the MODE button on the Remote Control.
2. While looking at the video screen, highlight DISC byeither pushing Up/Down/Left/Right buttons or by
repeatedly pushing the MODE button, then push
ENTER on the Remote Control.
NOTE: The VES system will retain the last setting when
turned off.
Play Video Games
Connect the video game console to the Auxiliary RCA
input jacks located on the back of the center console.
Audio/Video RCA Jacks (AUX Jacks)
on the rear of the center console enable
the monitor to display video directly
from a video camera, connect video
games for display on the screen, or
play music directly from an MP3
player.
1. Video in (yellow)
2. Left audio in (white)
3. Right audio in (red)
4
UNDERSTANDING YOUR INSTRUMENT PANEL 365

3. Open the center console and remove the shift leveroverride access cover (located in the front lower right
corner of the console storage bin). 4. Push and maintain firm pressure on the brake pedal.
5. Insert a screwdriver or similar small tool into the
access port, and push and hold the override release
lever forward.
6. Move the shift lever to the NEUTRAL position.
7. The vehicle may then be started in NEUTRAL.
8. Reinstall the shift lever override access cover.
TOWING A DISABLED VEHICLE
This section describes procedures for towing a disabled
vehicle using a commercial towing service.
Shift Lever Override Access Cover
552 WHAT TO DO IN EMERGENCIES