2016 DODGE CHALLENGER instrument panel

[x] Cancel search: instrument panel

Page 371 of 651

DODGE CHALLENGER 2016 3.G Owners Manual To link your internet radio accounts:
1. Download the Uconnect Access App to your mobiledevice.
2. Press the Via Mobile icon on the navigation bar at the bottom of the app. 3. Press the app you’d li

Page 372 of 651

DODGE CHALLENGER 2016 3.G Owners Manual Voice Texting (8.4A/8.4AN)
1. To send a message, push the Phone button. After
the beep, say the following command: “Send mes-
sage to John Smith.”
2. Listen to the prompt. After the beep, dictate

Page 373 of 651

DODGE CHALLENGER 2016 3.G Owners Manual TIP:
•Voice Texting is not compatible with iPhone, but if
your vehicle is equipped with Siri Eyes Free, you can
use your voice to send a text message.
• Messages are limited to 140 characters.
•

Page 374 of 651

DODGE CHALLENGER 2016 3.G Owners Manual SiriusXM Travel Link (8.4A/8.4AN)
Need to find a gas station, view local movie listings,
check a sports score or the 5 - day weather forecast?
SiriusXM Travel Link is a suite of services that brings a

Page 375 of 651

DODGE CHALLENGER 2016 3.G Owners Manual Do Not Disturb
With Do Not Disturb, you can disable notifications from
incoming calls and texts, allowing you to keep your eyes
on the road and hands on the wheel. For your conve-
nience there is a co

Page 376 of 651

DODGE CHALLENGER 2016 3.G Owners Manual NOTE:
•The transmitter has been tested and it complies with
FCC and IC rules. Changes or modifications not ex-
pressly approved by the party responsible for compli-
ance could void the user ’s aut

Page 406 of 651

DODGE CHALLENGER 2016 3.G Owners Manual •The system will ignore attempts to upshift at too low
of a vehicle speed.
• Holding the (-) paddle depressed (if equipped), or
holding the shift lever in the (-) position, will down-
shift the tr

Page 407 of 651

DODGE CHALLENGER 2016 3.G Owners Manual For vehicles equipped with Drive Modes or a “SUPER
TRACK PAK” button, refer to “Performance Control — If
Equipped” within “Uconnect Settings” in “Understand-
ing Your Instrument Panel