182
IdEntIFIcAtIO n MA r KI n GS
A. Manufacturer's plate
This plate is located on the front bumper
crossmember, under the bonnet.
1 -
European whole vehicle type approval
number.
2 - VF... Type and serial number.
3 - Gross vehicle weight (GVW).
4 - Gross train weight (GTW).
5.1 - Maximum weight on front axle.
5.2 - Maximum weight on rear axle.
B. Serial number on the
bodywork
d
. Paint code
The paint code is located on the front
bumper crossmember, under the bonnet.
c. tyres
The label (image given as an indication only)
affixed to the vehicle's door pillar, on the
driver's side, indicates:
-
the tyre sizes,
-
the tyre pressures when laden.E. Serial number on the
bodywork
This number is located under the plastic
cover, at the sill on the right-hand side.t
he tyre pressures must be checked cold,
at least monthly.
Vehicle identification
259
● Ensure that there is no person or obstacle nearby (below or
above) when unloading.
●
Never leave the tipper body raised when not in use.
●
Always discharge the load with the top part of the rear body si
de
secured.
●
Observe the maximum payload on the weights plate on the
vehicle.
●
Check regularly that the suspension is in good condition and
that the tyres are inflated to the recommended pressures.
●
Distribute the load uniformly in the tipper body
.
●
T
ransport similar products that discharge easily.
SAFEtY A d VI c E
Discharge onto a flat and hard surface: a sloping
or loose surface may cause a change in the centre
of gravity, with an adverse affect on the stability of
the vehicle.
●
Never drive, even slowly
, with the tipper body raised.
SPECIAL FEATURES
Tipper body
