2016 Citroen JUMPY RHD audio

[x] Cancel search: audio

Page 228 of 520

Citroen JUMPY RHD 2016 2.G Owners Manual 226
The system is active but is not detecting speed 
limit information.The driver can, if desired, adjust the 
speed of the vehicle according to the 
information given by the system.
Display of the sp

Page 247 of 520

Citroen JUMPY RHD 2016 2.G Owners Manual 245
This level of alert is based on the time before 
collision. It takes account of the vehicle 
dynamics, the speed of your vehicle and the 
one in front, the environmental conditions, the 
operation

Page 249 of 520

Citroen JUMPY RHD 2016 2.G Owners Manual 247
Deactivation / Activation of 
the alert and the braking
By default, the function is automatically 
activated at every engine start.
The deactivation or activation of the function is 
done in the v

Page 251 of 520

Citroen JUMPY RHD 2016 2.G Owners Manual 249
With / Without audio system
Activation / Deactivation
F Press on this buttton, its indicator lamp comes on, the system is 
activated.
F
 
P
 ress on this buttton, its indicator 
lamp goes off, the

Page 252 of 520

Citroen JUMPY RHD 2016 2.G Owners Manual 250
Fatigue detection system
The system resets itself if one of the following 
conditions is met:
- 
e
 ngine running, the vehicle has been 
stationary for more than 15 minutes,
-
 
t
 he ignition has

Page 255 of 520

Citroen JUMPY RHD 2016 2.G Owners Manual 253
No alert will be given in the following situations:
- i n the presence of immobile objects 
(parked vehicles, barriers, street lamps, 
road signs...),
-
 
w
 ith vehicles moving in the opposite 
d

Page 258 of 520

Citroen JUMPY RHD 2016 2.G Owners Manual 256
Front parking sensors
As an addition to the rear parking sensors, the 
front parking sensors are triggered when an 
obstacle is detected in front and the speed of 
the vehicle is still below 6 mph

Page 266 of 520

Citroen JUMPY RHD 2016 2.G Owners Manual 264
In the Driving menu, select " Under-inflation 
initialisation ".
With the audio system
In the "Personalisation-configuration " menu, 
select " Under-inflation initialisation ".
Operating fault
The
Page:   < prev 1-8 9-16 17-24 25-32 33-40 41-48 49-56 ... 208 next >