2016 Citroen GRAND C4 PICASSO RHD tow

288
Checking / adjusting tyre pressures
You can also use the compressor without injecting   any   product,   to   check   and   if   necessary  
a

djust   your   tyre   pressures.
F

T
urn the selector A to the "Air"
position.
F
 
U
ncoil   the   black   pipe   H  
f
ully.
F
 
C
onnect   the   black   pipe   to   the  
t

yre   valve. F
 C onnect   the   compressor's   electrical  
c

onnector   to   the   vehicle's   12   V   socket.
F
 
S
tart   the   vehicle   and   let   the   engine   run.
F
 
A
djust   the   pressure   using   the   compressor  
(

to   inflate:   switch   B in position "I";
 
t

o deflate:   switch   B in position "O"
 
and  
p

ress button C),
  according   to   the   vehicle's  
t

yre   pressure   label.
F
 
R
emove   the   kit   then   stow   it.Should
  the   pressure   of   one   or   more  
t

yres   be   adjusted,   it   is   necessary   to  
r

einitialise   the   under-inflation   detection  
s

ystem.
For
  more   information   on   Under-
inflation detection , refer to the
corresponding
 s

ection.
In the event of a breakdown

290
Taking out the wheel
F Unscrew  the   central   nut.
F  R emove   the   fixing   (nut   and   screw).
F
 
L
ift   the   spare   wheel   towards   you   from   the  
r

e a r.
F
 
R
emove   the   wheel   from   the   boot. As the spare wheel is narrower than the
wheels on the vehicle, in the event of a
puncture,
  the   punctured   wheel   must   be  
c

arried   in   the   boot.
The
  spare   wheel   is   located   in   the   boot   under   the   floor.
Access to the spare wheel
Putting the spare wheel back in
place
F Return
  the   wheel   to   its   housing.
F  U nscrew   the   nut   a   few   turns   on   the   screw.
F
 
P
osition   the   fixing   (nut   and   screw)   in   the  
m

iddle   of   the   wheel.
F
 
F
ully   tighten   the   central   nut   to   secure   the  
w

heel   correctly. F
 R eturn   the   box   to   its   position   in   the   middle  
o

f   the   wheel.
In the event of a breakdown

291
Spare wheelProcedure for changing a wheel with a punctured tyre for the spare wheel using the tools provided with the vehicle.
S
ome
 
of
 
the
 
tools   are   accessible   from   inside  
t

he
 
boot.
The
 
wheel
 
chock   2 as well as the wheelbrace
extension
 6

 
are   stowed   under   the   right   hand  
b

oot
 
sill
 
trim.
The wheelbrace 1
  and   the   towing   eye   7 are
stowed
 
under
 
the   left   hand   boot   sill.
Access to the tools*2. Wheel  chock   for   immobilising   the   vehicle  (
except   versions   with   manual   gearbox).
3.
 J

ack   with   integral   handle.
 F

or   raising   the   vehicle.
4.
 W

heel   bolt   cover   remover.
 F

or   removing   the   wheel   bolt   covers   on   alloy  
w

heels.
5.
 S

ocket   for   the   security   bolts   (stowed   in   the  
g

love   box).
 F

or   adapting   the   wheelbrace   to   the   special  
s

ecurity   bolts.
6.
 W

heelbrace
 e
xtension.
 F

or   lowering/raising   the   spare   wheel  
c

a r r i e r.
7.
 T

owing   eye.
Wheel with trim
When removing the wheel ,   detach   the   trim  f
irst   using   the   wheelbrace   1   pulling   at   the   valve  
p

assage   hole.
When refitting the wheel ,
  refit   the   trim  
s

tarting   by   placing   its   notch   facing   the   valve  
a

nd   press   around   its   edge   with   the   palm   of   your  
han

d.
List of tools*
All of these tools are specific to your vehicle
and  can   vary   according   to   equipment.   Do   not  
u

se   them   for   other   purposes.
1.
 W

heelbrace.
 F

or   removing   the   wheel   trim   and   the   wheel  
f

ixing
 bol
ts. *
  
D
epending   on   version.   A   complete   set   of   tools  
i

s   provided   with   the   spare   wheel.
The
 
other
 
tools,
 
the
 
jack
 
3
 
and
 
the
 
tool
 
for
 r
emoving
 
the
 
wheel
 
bolt
 
covers
 
on
 
alloy
 
w

heels

4 ,
 
are
 
stowed
 
in
 
a
 
box
 
attached
 
to
 
the
 
spar

e
 w

heel.
The
 
assembly
 
is
 
secured
 
under
 
the
 
vehicle
 
in
 
a

 
carrier.
8
In the event of a breakdown

293
A punctured wheel from the vehicle cannot   be   fitted   under   the   vehicle.   It  
m

ust  
b
e  
c
arried  
i
n  
t
he  
b
oot.  
U
se  
a
 
c
over  
t

o   protect   the   boot.
F
 P
ress
 
the
 
tongue,
 
slide
 
the
 
tool
 
box
 
cover
 t
o
 
the
 
centre
 
and
 
remove
 
it
 
for
 
access
 
to
 
t

he
 
other
 
tools
 
( jack
 
and
 
wheel
 
bolt
 
cover
 
r

emover
 
for
 
alloy
 
wheels).Putting the carrier and spare
wheel back in place
F Stow   the   corresponding   tools   in   the   box  a
nd   close   the   cover.
F
 
P
osition   the   tool   box   on   the   ground.
Stowing the tools
F Return  the   tools   to   the   box   and   stow   the  b
ox   in   the   vehicle's   boot.
F
 
W
ind   in   the   carrier   by   turning   the  
w

heelbrace   clockwise:   once   the   cable   is  
f

ully   wound   in   you   should   no   longer   feel  
an

y
 r
esistance.
F

S
tow the other tools in the locations
provided
  in   the   boot.
When
  the   spare   wheel   is   fitted   in   place  
o

f   a   punctured   wheel,   it   is   essential  
t

o   return   the   carrier   and   tools   to   their  
n

ormal   position   under   the   vehicle  
b

efore   moving   off.
8
In the event of a breakdown

298
Fitting the "space-saver"
spare wheel
If your vehicle is fitted with alloy wheels, when   tightening   the   bolts   on   fitting,   it  
i

s   normal   to   notice   that   the   washers  
d

o   not   come   into   contact   with   the  
"

space-saver"   spare   wheel.   The   wheel  
i

s   secured   by   the   conical   sur face   of  
e

ach   bolt.
After changing a wheel
To correctly store the punctured wheel in the boot ( not in the location for the
space-saver wheel ),
  first   remove   the  
c

entral   cover.
When
  using   the   "space-saver"   type  
s

pare   wheel,   do   not   exceed   50   mph  
(

80 km/h).
Have
  the   tightening   of   the   bolts   and   the  
p

ressure   of   the   spare   wheel   checked  
b

y   a   CITROËN   dealer   or   a   qualified  
w

orkshop   without   delay.
Have
  the   punctured   wheel   repaired  
a

nd   refitted   to   the   vehicle   as   soon   as  
p

ossible.
F
 
T

ighten
 
the
 
security
 
bolt
 
using
 
the
 w
heelbrace 1
 
fitted
 
with
 
the
 
security
 s
ocket  5
 
(depending
 
on
 
equipment).
F
 
T

ighten
 
the
 
other
 
bolts
 
using
 
the
 
w

heelbrace 1
 
o

n l y.
F
 
R

efit
 
the
 
wheel
 
bolt
 
cover(s)
 
(depending
 
on
 
e

quipment).
F
 
S

tow
 
the
 
tools
 
in
 
the
 
box. The
  tyre   inflation   pressures   are   given   on   this  lab
el.
In the event of a breakdown

300
Directional dipped beam
headlamps (xenon model)Main beam headlamps (xenon model)
F Remove  the   protective   plastic   cover   by  p
ulling   the   tab.
F
 
P
ush   the   connector.
F
 
R
emove   the   bulb   and   change   it.
For
  reassembly,   carry   out   these   operations   in  
r

everse
 o
rder.
D5S
 
xenon
 
bulbs
 
must
 
be
 
changed
 
b

y
 
a
 
CITROËN
 
dealer
 
or
 
a
 
qualified
 
w

orkshop,
 
as
 
there
 
is
 
a
 
risk
 
of
 
el

ectrocution.
In the event of failure of one
of
 
the
 
D5S
 
bulbs,
 
it
 
is
 
recommended
 
t

hat
 
the
 
bulb
 
on
 
the
 
other
 
side
 
be
 
c

hanged
 
at
 
the
 
same
 
time.
The
 
headlamps
 
have
 
polycarbonate
 
l

enses
 
with
 
a
 
protective
 
coating:
F

d

o not clean them using a dr y
or abrasive cloth, nor with a
detergent or solvent product,
F
 
u

se
 
a
 
sponge
 
and
 
soapy
 
water
 
or
 
a
 
p

H
 
neutral
 
product,
F
 
w

hen
 
using
 
a
 
high
 
pressure
 
washer
 
o

n
 
persistent
 
marks,
 
do
 
not
 
keep
 
t

he
 
lance
 
directed
 
towards
 
the
 
l

amps
 
or
 
their
 
edges
 
for
 
too
 
long,
 
s

o
 
as
 
not
 
to
 
damage
 
their
 
protective
 
c

oating
 a

nd
 sea

ls.
Changing
 
a
 
bulb
 
should
 
only
 
be
 
done
 
a

fter
 
the
 
headlamp
 
has
 
been
 
switched
 
o

ff
 
for
 
several
 
minutes
 
(risk
 
of
 
serious
 
b

urns).
F
 
D

o
 
not
 
touch
 
the
 
bulb
 
directly
 
with
 
y

our
 
fingers,
 
use
 
a
 
lint-free
 
cloth.
It
 
is
 
imperative
 
to
 
use
 
only
 
anti-
ultraviolet
 
(UV)
 
type
 
bulbs
 
to
 
avoid
 
d

amaging
 t

he
 h

eadlamp.
Always
 
replace
 
a
 
failed
 
bulb
 
with
 
a
 
n

ew
 
bulb
 
with
 
the
 
same
 
type
 
and
 
s

pecification.
In the event of a breakdown

312
Engine compartment fuses
The fusebox is placed in the engine compartment   near   the   battery.
Fuse N°Rating Functions
F18 10 ARight-hand
  main   beam.
F19 10 ALeft-hand
  main   beam.
F29 40 AWipers.Fuse table
Access to the fuses
F Unclip   the   cover,   by   pushing   the   two   red  l
atches   towards   the   rear   of   the   vehicle.
F
 
C
hange   the   fuse.
F
 
W
hen   you   have   finished,   close   the   cover  
c

arefully   to   ensure   correct   sealing   of   the  
f

usebox.
In the event of a breakdown

317
To w i n g
The towing eye is installed in the boot under the   floor.
To
  gain   access   to   it:
F

o
pen the boot,
F
 
l
ift   the   floor   and   remove   it,
F
 
r
emove   the   towing   eye   from   its   housing.
General recommendations
Observe the legislation in force in your country.
E nsure   that   the   weight   of   the   towing   vehicle   is   higher   than   that   of   the   towed   vehicle.
The
  driver   must   remain   at   the   wheel   of   the   towed   vehicle   and   must   have   a   valid   driving   licence.
When
  towing   a   vehicle   with   all   four   wheels   on   the   ground,   always   use   an   approved   towing  
a

rm;   rope   and   straps   are   prohibited.
The
  towing   vehicle   must   move   off   gently.
When
  towing   a   vehicle   with   the   engine   off,   there   is   no   longer   any   power   assistance   for  
b

raking   or   steering.
In
  the   following   cases,   you   must   always   call   on   a   professional   recovery   service:
-
 
v
ehicle   broken   down   on   a   motor way   or   fast   road,
-
 
f
our-wheel   drive   vehicle,
-
 
w
hen   it   is   not   possible   to   put   the   gearbox   into   neutral,   unlock   the   steering,   or   release  
t

he   parking   brake,
-
 
t
owing   with   only   two   wheels   on   the   ground,
-
 
w
here   there   is   no   approved   towing   arm   available...
Procedure
 
for
 
having
 
your
 
vehicle
 
towed
 
or
 
for
 
towing
 
another   vehicle   using   the   towing   eye.
Access to the tools
8
In the event of a breakdown