2016 Citroen GRAND C4 PICASSO RHD lock

68
Hands-free tailgate access
The tailgate my be equipped with a hands-free function, to allow you to open or close the tailgate when   your   hands   are   full.
For
  more   information   on   the   Motorised tailgate,
  refer   to   the   corresponding   section.
"Hands-free" opening
F With  your   hands   full   and   the   remote   control  o
n   your   person   in   the   recognition   zone A,
pass
  your   foot   rapidly   below   the   rear  
b

u m p e r.
The
  instruction   is   confirmed   by   flashing   of   the  
d

irection   indicators   and   an   audible   signal.
The
  tailgate   opens   to   the   memorised   position.
Passing your foot below the bumper again while the   tailgate   is   opening   stops   the   movement. P

assing   your   foot   below   the   bumper   for   a   third
 t

ime   reverses   the   direction   of   movement.
"Hands-free" closing
F With  your   hands   full   and   the   remote   control  o
n   your   person   in   the   recognition   zone A,
pass
  your   foot   rapidly   below   the   rear  
b

u m p e r.
The
  instruction   is   confirmed   by   flashing   of   the  
d

irection   indicators   and   an   audible   signal.
Deactivation
Hands-free tailgate access is activated by default.
T his   function   can   be   activated   or   deactivated  
b

y   selecting   "Hands-free tailgate access " in
the Driving
 

menu   of   the   touch   screen   tablet.
Ensure
 
that
 
you
 
are
 
steady
 
on
 
your
 
feet
 
b

efore
 
passing
 
a
 
foot
 
rapidly
 
below
 
the
 
r

ear
 
bumper.
Take
 
care
 
not
 
to
 
touch
 
the
 
exhaust
 
s

ystem,
 
which
 
may
 
be
 
hot
 
-
 
Risk
 
of
 
b

urns!
If
 
the
 
vehicle
 
is
 
locked,
 
it
 
is
 
unlocked
 
b

efore
 
opening
 
the
 
tailgate.
Automatic locking
To have the vehicle lock itself after closing the t ailgate   by   passing   a   foot   below   the   bumper,  
a

ctivate " Hands-free tailgate access self-
locking " in the Driving
 

menu   of   the   touch  
s

creen
 t
ablet.
Passing your foot below the bumper again while the   tailgate   is   closing   stops   the   movement. P

assing   your   foot   below   the   bumper   for   a   third
 t

ime   reverses   the   direction   of   movement.
Access

70
For all work on the alarm system, contact   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
AlarmSystem which protects and provides a deterrent against theft and break-ins. It provides the following types of monitoring:
- Exterior perimeter
The system checks for opening of the vehicle.
T he   alarm   is   triggered   if   anyone   tries   to   open   a  
d

oor,   the   boot   or   the   bonnet...
- Interior volumetric
The system checks for any variation in the volume   in   the   passenger   compartment.
The
  alarm   is   triggered   if   anyone   breaks   a  
w

indow,   enters   the   passenger   compartment   or  
m

oves   inside   the   vehicle.
Self-protection function
The system checks for the disconnection   of   any   of   its   components.
The
  alarm   is   triggered   if   the   battery,  
t

he   button   or   the   siren   wiring   is  
d

isconnected
 o
r
 d
amaged.
Locking the vehicle with full
alarm system
Activation
If an opening (door, boot, bonnet...) is not closed   fully,   the   vehicle   is   not   locked   but   the  
e

xterior   perimeter   monitoring   will   be   activated  
a

fter   a   delay   of   45   seconds,   at   the   same   time  
a

s   the   interior   volumetric   monitoring.
F
 
L
ock   the   vehicle   using   the  
r

emote   control.
F
Switch off the ignition and get out of the vehicle.
or
F
 L ock   the   vehicle   using   the   "Keyless   Entry  
a

nd   Starting"   system.
The
  monitoring   system   is   active:   the   indicator  
l

amp   in   the   button   flashes   once   per   second  
a

nd   the   direction   indicators   come   on   for   about  
2

  seconds.
After
  a   command   to   lock   the   vehicle   using  
t

he   remote   control   or   the   Keyless   Entry  
a

nd   Starting   system,   the   exterior   perimeter  
m

onitoring   is   activated   after   a   delay   of  
5 s

econds,   the   interior   volumetric   monitoring  
a

fter   45   seconds.
Access

71
OFF
Locking the vehicle with exterior perimeter
monitoring only
Deactivate the interior volumetric monitoring to   avoid   unwanted   triggering   of   the   alarm   in  
c

ertain   cases   such   as:
-
 
l
eaving   a   window   partially   open,
-
 
w
ashing   your   vehicle,
-
 
c
hanging   a   wheel,
-
 
t
owing   your   vehicle,
-
 
t
ransport   on   a   ferry.
Deactivating the volumetric
monitoring
F Switch  off   the   ignition   and   within  t
en   seconds   press   this   button  
u

ntil   its   indicator   lamp   is   on   fixed.
F
 
G

et
 
out   of   the   vehicle.
F
 
I

mmediately   lock   the   vehicle   using   the  
r

emote   control   or   the   "Keyless   Entry   and  
S

tarting"   system.
Only
 
the
 
exterior   perimeter   protection   system   is  
a

ctive:
 
the   indicator   lamp   in   the   button   flashes  
o

nce
 
per
 
second.
To
 
be
 
effective,   this   deactivation   must   be   done  
e

very
 
time   the   ignition   is   switched   off.
In
 
the
 
case
 
of
 
automatic
 
locking
 
of
 
the
 
v

ehicle
 
(which
 
occurs
 
after
 
a
 
period
 
o

f
 
30
 
seconds
 
if
 
a
 
door
 
or
 
the
 
boot
 
is
 
n

ot
 
opened),
 
the
 
monitoring
 
system
 
is
 
r

eactivated
 a

utomatically.
Deactivation
F Press   one   of   the   unlocking   buttons   on   the  r
emote   control:
short press
long
  press
or
F
 
U
nlock   the   vehicle   using   the   "Keyless   Entry  
a

nd   Starting"   system.
The
  monitoring   system   is   deactivated:   the  
i

ndicator   lamp   in   the   button   is   off   and   the  
d

irection   indicators   flash   for   about   2   seconds.
Reactivating the interior
volumetric monitoring
F Deactivate  the   exterior   perimeter  m
onitoring   by   unlocking   the   vehicle   using  
t

he   remote   control   or   the   Keyless   Entry   and  
S

tarting   system.
The
  indicator   lamp   in   the   button   goes   off.
F
 
R
eactivate   the   full   alarm   system   by   locking  
t

he   vehicle   using   the   remote   control   or   the  
"

Keyless   Entry   and   Starting"   system.
The
  indicator   lamp   in   the   button   flashes   once  
p

er   second   again.
2
Access

72
Triggering of the alarm
This is indicated by sounding of the siren and   flashing   of   the   direction   indicators   for  
t

hirty seconds.
The
  monitoring   functions   remain   active   until  
t

he   alarm   has   been   triggered   eleven   times   in  
s

uccession.
When
  the   vehicle   is   unlocked   using   the   remote  
c

ontrol   or   the   Keyless   Entry   and   Starting  
s

ystem,   rapid   flashing   of   the   indicator   lamp  
i

n   the   button   informs   you   that   the   alarm   was  
t

riggered   during   your   absence.   When   the  
i

gnition   is   switched   on,   this   flashing   stops  
i

mmediately.
Failure of the remote control
To deactivate the monitoring functions:
F  
U
nlock   the   vehicle   using   the   key   (integral  
w

ith   the   remote   control)   in   the   driver's   door  
l

ock.
F
 
O
pen   the   door;   the   alarm   is   triggered.
F
 
S
witch   on   the   ignition;   the   alarm   stops.   The  
i

ndicator   lamp   in   the   button   goes   off.
Locking the vehicle without
activating the alarm
F Lock  or   deadlock   the   vehicle   using   the   key  (
integral   with   the   remote   control)   in   the  
d

river's   door   lock.
Operating fault
When the ignition is switched on, fixed illumination   of   the   indicator   lamp   in   the   button  
i

ndicates   a   fault   in   the   system.
Have
  it   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Automatic activation*
2 minutes after the last door or the boot is closed,   the   system   is   activated   automatically.
F
 
T
o   avoid   triggering   the   alarm   on   entering  
t

he   vehicle,   first   press   the   unlocking   button  
o

n   the   remote   control   or   unlock   the   vehicle  
u

sing   the   Keyless   Entry   and   Starting  
s

ystem.
*
  Depending   on   the   country   of   sale.
Access

76
Passenger's seat backrest angle
F Pull  the   control   upwards   or   turn   the   knob   to  a
djust   the   backrest.
When
  the   backrest   is   at   the   desired   angle,  
r

elease   the   control.
Table position for the
passenger's seat backrest
This position, associated with the position of the   rear   seats,   allows   you   to   carry   long   objects  
i

nside   the   vehicle.
When the backrest is at the desired angle, release   the   control   lever.   To   ensure   that   the  
b

ackrest   does   not   suddenly   fold   for wards  
a

nd   hurt   you,   restrain   it   with   your   back   or  
y

our   hand   while   operating   the   control.
Check that there is no object that could inter fere   with   the   movement   of   the   seat,  
b

oth   above   and   below.
F
 
P

lace   the   head   restraint   in   the   low   position,  
r

aise   the   armrest   and   fold   the   fixed   table  
o

nto   the   back   of   the   seat.
F
 
P

ull   the   control   fully   up   and   tip   the   backrest  
fo

rwards.
To
 
return   to   the   normal   position,   guide   the  
b

ackrest   backwards   until   it   locks.
Ease of use and comfort

85
Repositioning a seat
Before operating the rear seats, check that the outer rear seat belts are not
loose,
  to   avoid   damaging   them.   The  
c

entre   belt   must   be   stowed.   Fix   the  
t

ongues   of   the   three   belts   to   their  
anc

horage
 p
oints.
Continuity panels
These continuity panels are not
designed  to   support   a   weight   greater  
t

han   30   kg. Releasing / locking the continuity panels
F
 
B
efore   unfolding   the   continuity   panels,  
c

heck   that   the   seats   in   the   2
nd row are fully
back.
F
 
S

lide
 
the
 
continuity
 
panel
 
latch   upwards   to  
r

elease.
F
 
S

traighten
 
the
 
continuity
 
panel,   then   slide  
t

he
 
latch
 
downwards
 
to
 
lock
 
it.
F
 
I

f
 
necessary,
 
straighten
 
the
 
continuity
 
p

anels
 
for
 
the
 
seats
 
in
 
the
 
2
nd row and lock t
hem
 
in
 
place.
F
 
R

aise
 
the
 
backrest
 
and
 
push
  it   rear wards  
u

ntil
 
it
 
locks
 
in
 
position. Each
  seat   has   a   continuity   panel   at   the   bottom  o
f   the   backrest,   that   once   unfolded:
-  p rovides   a   continuous   load   sur face   in   the  
b

oot, whatever the position of the seats,
-
 
a
voids   objects   sliding   under   the   seats   in  
t

he   2
nd row.
3
Ease of use and comfort

86
Access to the third-row
seats
Access to the third-row seats is via the outer second-row sea ts.
F

P
ull the lever E .
  The   seat   is   released   and  
t

he   seat   cushion   comes   up   against   the  
b

ackrest.
F
 
H
old   the   lever   E   in   the   raised   position,  
p

ushing   for wards.   The   whole   seat   slides  
t

owards   the   front   seat.
Space
  becomes   free   behind   the   seat,   the  
third-row
  passengers   can   get   to   their   seats.
Leaving the vehicle from
the third-row seatsRepositioning a seat, from
the outside, with the door
open
In the event of a failure of this system (
lever E ),
  the   passengers   in   the   third  
r

ow can also leave the vehicle after first
folding
  the   backrests   of   the   second-row  
s

eats   using   the   strap   D.
Do
  not   allow   children   to   operate   the  
sea

ts
 w
ithout
 s
upervision.
F

L

ift the lever E
.
 
The
 
seat
 
is
 
released
 
and
 
t

he
 
seat
 
cushion
 
comes
 
up
 
against
 
the
 
b

ackrest.
F
 
P

ush
 
the
 
seat
 
backrest,
 
still
 
holding
 
the
 l
ever E
 
in
 
the
 
raised
 
position. If
 
there   are   passengers   seated   in   the   third   row:
F
 
m

anually   return   the   assembly   as   far  
a

s   possible   rear wards;   the   seat   does  
n

ot   return   to   the   fully   back   position,   so  
a

s   to   retain   legroom   for   the   third-row  
p

assengers,
F
 
f

old   the   seat   cushion   until   it   locks.
Ensure   that   there   is   no   object   on   or   under   the  
s

eat
 
that   you   want   to   move.
Before
 
operating
 
the
 
seats,
 
ensure
 
that
 
t

he
 
tables
 
on
 
the
 
backs
 
of
 
the
 
first-row
 
s

eats
 
are
 
folded
 
away.
Ease of use and comfort

87
Third-row seats
Concertina boards
Folding the concertina boardsF Remove  the   luggage   net.  F
or   more   information   on   the   luggage   net  
a

nd   the   Interior fittings , refer to the
corresponding
 s

ection.
F
 
R
eturn   the   second-row   continuity   panels   to  
t

heir   initial   position   and   lock   them   in   place.
F
 
F
old   the   concertina   boards   and   position  
t

hem
 v
ertically.
F

P
ull on the strap F   located   behind   the   seat  
b

ackrest.   The   backrest   pivots   rear wards,  
p

ulling   the   seat   base   with   it.   The   seat   locks  
i

n   the   open   position.
Each of the two floor panels can
support
 
a
 
load
 
of
 
100
 
kg.
Pull
 
on
 
the
 
control,
 
the
 
3
 
sections
 
of
 
the
 
board
 
w

ill
 
fold
 
like
 
a
 
concertina.
When
 
the
 
third-row
 
seats
 
are
 
upright,
 
these
 
c

oncertina
 
boards
 
can
 
be
 
left
 
either:
-
 
f

lat
 
behind
 
the
 
seats,
-
 
i

n
 
the
 
vertical
 
position,
thereby
 
leaving
 
a
 
storage
 
area
 
available.
Repositioning the
seats
Two rigid concertina boards, which cannot b e   separated   from   the   vehicle,   cover   the  
2 t

hird-row   seats,   when   these   are   in   the   folded  
p

osition.
3
Ease of use and comfort