2016 Citroen GRAND C4 PICASSO RHD ECU

252
I UF: seat suitable for the installation of an
ISOFIX U niversal seat, F or ward
  facing  
s

ecured   using   the   upper   strap   to   the   top  
t

ether   on   ISOFIX   seats.
IL- SU:

s
eat suitable for the installation of an
I sofix
  Semi- Universal
 sea

t
 ei
ther:
-
 
r
ear ward   facing   fitted   with   an   upper   strap  
o

r   a   support   leg,
-
 
f
or ward   facing   fitted   with   a   support   leg,
-
 
a
  sleeper   cot   fitted   with   an   upper   strap   or   a  
s

upport   leg.
Remove
  and   stow   the   head   restraint  
b

efore   installing   a   child   seat   on   a  
p

assenger   seat.   Refit   the   head   restraint  
o

nce   the   child   seat   has   been   removed.
For
  more   information   on   ISOFIX mountings
and
  in   particular   on   securing   the   upper   strap,  
r

efer   to   the   corresponding   section.
X:

s
eat not suitable for the installation of a
child
  seat   or   sleeper   cot   for   the   weight   group  
i

ndicated.
Safety

253
Child seats
The incorrect installation of a child seat in a vehicle   compromises   the   child's   protection   in  
t

he   event   of   an   accident.
Check
  that   there   is   no   seat   belt   or   seat   belt  
b

uckle   under   the   child   seat   as   this   could  
de

stabilise
 i
t.
Remember
  to   fasten   the   seat   belts   or   the  
c

hild   seat   harnesses   keeping the slack in
relation
  to   the   child's   body   to a minimum,
even
  for   short   journeys.
For
  the   installation   of   a   child   seat   using   a  
s

eat   belt,   ensure   that   this   is   well   tensioned  
o

n   the   child   seat   and   that   it   is   holding   the  
c

hild   seat   firmly   against   the   seat   of   your  
v

ehicle.   If   your   front   passenger   seat   is  
a

djustable,   move   it   for ward   if   necessary.
At the rear seats, always leave sufficient
space
  between   the   front   seat   and:
-
 
a
  rear ward   facing   child   seat,
-
 
t
he   feet   of   a   child   seated   in   a   for ward  
f

acing   child   seat.
Recommendations
For this, move the front seat for ward and if necessary   straighten   its   backrest.
For
 o

ptimum
 in
stallation
 o
f
 t
he
 fo
rward
 f
acing
 c

hild   seat,   ensure   that   the   back   of   the   child  
s

eat   is   as   close   as   possible   to   the   backrest  
o

f   the   vehicle's   seat,   or   in   contact   if   possible.
The
  head   restraint   must   be   removed   before  
i

nstalling   a   child   seat   with   a   backrest   on   the  
p

assenger
 sea
t.
Ensure
  that   the   head   restraint   is   stowed   or  
a

ttached   securely   so   that   it   is   not   thrown  
a

round   the   vehicle   in   the   event   of   sharp  
b

raking.
Refit
  the   head   restraint   as   soon   as   the   child  
s

eat   is   removed.Installing a booster
cushion
As a safety precaution, do not leave:
-  o ne   or   more   children   alone   and  
u

nsupervised   in   a   vehicle,
-
 
a
  child   or   an   animal   in   a   vehicle   which  
i

s   exposed   to   the   sun,   with   the   windows  
c

losed,
-
 
t
he   keys   within   reach   of   children   inside  
t

he   vehicle.
To
  prevent   accidental   opening   of   the   doors,  
u

se   the   child   lock.
Take
  care   not   to   open   the   rear   windows   by  
m

ore   than   one   third.
To
  protect   young   children   from   the   rays   of  
t

he   sun,   fit   side   blinds   on   the   rear   windows.
The
  chest   part   of   the   seat   belt   must   be  
p

ositioned   on   the   child's   shoulder   without  
t

ouching   the   neck.
Ensure that the lap part of the seat belt
passes   correctly   over   the   child's   thighs.
CITROËN   recommends   the   use   of   a   booster  
s

eat   which   has   a   back,   fitted   with   a   seat   belt  
g

uide   at   shoulder   level.
The
 
legislation
 
on
 
carrying
 
a
 
child
 
on
 
the
 
f

ront
 
passenger
 
seat
 
is
 
specific
 
to
 
each
 
c

ountry.
 
Refer
 
to
 
the
 
legislation
 
in
 
force
 
in
 
t

he
 
country
 
in
 
which
 
you
 
are
 
driving.
Deactivate
 
the
 
passenger
 
front
 
airbag
 
when
 
a

 
rear ward
 
facing
 
child
 
seat
 
is
 
installed
 
on
 
t

he
 f

ront
 p

assenger
 sea

t.
 O

therwise,
 t

he
 c

hild
 
would
 
risk
 
being
 
seriously
 
injured
 
or
 
k

illed
 
if
 
the
 
airbag
 
were
 
deployed.
Children at the front
6
Safety

264
Accessories
A wide range of accessories and genuine parts is available from the CITROËN dealer network.
T hese   accessories   and   parts   are   all   suitable   for   your   vehicle   and   benefit   from   CITROËN's   recommendation   and   warranty.
"Comfort"
Door deflectors, sun blind, insulated module, coat   hanger   fixed   to   head   restraint,   mobile  
r

eading   lamp,   mirror   for   caravan,   front   and   rear  
par

king
 s
ensors,
 p
rogrammable
 a
dditional
 h

eating,   smoker's   kit,   solar   film   for   rear   door  
w

indows,   portable   scented   air   freshener...
"Transport systems"
Boot carpet, boot liner, boot net, boot
spacers,  transverse   roof   bars,   ski   carrier,   roof  
b

oxes,   towbars,   towbar   wiring   harnesses,  
b

icycle   carriers   for   towbar   and   roof   bars,  
t

owbars   with   fixed   and   detachable   towball,  
s

eparation   net,   sliding   carrier,   boot   organiser  
(

Grand C4 Picasso)...
If
  a   towbar   and   wiring   harness   are   fitted  
o

utside   the   CITROËN   dealer   network,   the  
i

nstallation   must   be   done   strictly   in   line   with   the  
ma

nufacturer's
 r
ecommendations.
If
  your   vehicle   has   a   detachable   towball,   it   is  
r

ecommended   that   the   ball   be   removed   when  
n

ot   towing.
"Styling"
Gear lever knobs, aluminium foot rest, alloy wheels,   door   sill   finishers,   interior   mirror  
s

hells...
"Security and safety"
Anti-intrusion alarm, vehicle tracking system, c hild   seats   and   booster   cushions,   breathalyser,  
f

irst   aid   kit,   fire   extinguisher,   warning   triangle,  
h

igh   visibility   vest,   wheel   security   bolts,   snow  
c

hains,   non-slip   covers,   winter   tyres,   foglamp  
k

it,   security   film   for   front   door   windows,   dog  
g

uard,   pet   seat   belt...
"Protection"
Mats*, seat covers compatible with lateral airbags,   mud   flaps,   door   protective   mouldings,  
b

umper   protection   strips,   vehicle   cover,   boot  
s

ill   protector,   door   sill   protectors,   seat   and   boot  
p

rotective   covers   for   pets...
The
  rear   bodywork   has   been   designed   to   avoid  
s

p r ay.
*
 
T
o   avoid   any   risk   of   jamming   the   pedals:
-
 
e
nsure   that   mats   are   correctly   positioned  
a

nd   secured,
-
 
n
ever   fit   one   mat   on   top   of   another.
Practical information

267
Roof bars
For safety reasons and to avoid damaging the roof, it is essential to use transverse roof bars
that
  are   approved   for   your   vehicle.
Observe
  the   fitting   instructions   and   the  
c

onditions   of   use   given   in   the   information  
p

rovided   with   the   roof   bars.Version with
longitudinal bars
To install the roof bars, you must secure them   only   to   the   four   anchorage   points   in   the  
r

oof   frame.   These   points   are   masked   by   the  
v

ehicle's   doors   when   closed.
The
  roof   bar   fixings   include   a   stud   that   should  
b

e   introduced   into   the   aperture   at   each  
anc

horage
 p
oint.
Version without longitudinal
bars
You must fit the transverse bars to the longitudinal   bars   at   the   fixing   points   indicated  
b

y   engraved   markings   on   the   longitudinal   bars.
Recommendations
F Distribute  the   load   evenly,   avoiding  ov
erloading   on   one   side.
F
 
A
rrange   the   heaviest   part   of   the   load   as  
c

lose   as   possible   to   the   roof.
F
 
A
nchor   the   load   securely   and   fit   a   warning  
f

lag   if   part   of   it   overhangs   the   vehicle.
F
 
D
rive   gently,   as   the   vehicle   will   be   more  
l

iable   to   the   effects   of   side   winds   (vehicle  
s

tability   may   be   affected).
F
 
R
emove   the   roof   bars   as   soon   as   they   are  
n

o
 lon
ger
 n
eeded. Maximum
  load,   distributed   over   the   roof  
b

ars,   for   a   loading   height   not   exceeding  
4

0   cm:   80 kg
.
This   value   is   subject   to   change,   please  
c

heck   the   maximum   load   stated   in   the  
i

nstructions   provided   with   he   roof   bars.
If   the   height   exceeds   40   cm,   adapt   the  
s

peed   of   the   vehicle   to   the   profile   of   the  
r

oad   to   avoid   damaging   the   roof   bars  
a

nd   the   fixings   on   the   vehicle.
Please   refer   to   national   legislation   so   as  
t

o   meet   the   requirements   on   carrying  
o

bjects   that   are   longer   than   the   vehicle.
When   carrying   long   objects,   it   is  r
ecommended   that   you   deactivate   the  
m

otorised   operation   of   the   tailgate.
7
Practical information

289
Spare wheel
The tools are installed in the boot under the fl o o r.
Remove
  the   boot   carpet   for   access   to   them.
Access to the tools
List of tools*
Procedure for changing a wheel with a punctured tyre for the spare wheel using the tools provided with the vehicle.
A ll of these tools are specific to your
vehicle
  and   can   vary   according   to   the   level  
o

f   equipment.   Do   not   use   them   for   other  
p

urposes.
1.
 W

heelbrace.
 F

or   removing   the   wheel   trim   and   removing  
t

he   wheel   bolts.
2.
 C

hock   for   immobilising   the   vehicle   (except  
v

ersions   with   manual   gearbox).
3.
 J

ack   with   integral   handle.
 F

or   raising   the   vehicle.
4.
 W

heel   bolt   cover   remover.
 F

or   removing   the   wheel   bolt   covers   on   alloy  
w

heels.
5.
 S

ocket   for   the   security   bolts   (located   in   the  
g

love   box).
 F

or   adapting   the   wheelbrace   to   the   special  
"s

ecurity"
 b
olts.
*
  According   to   equipment.
8
In the event of a breakdown

290
Taking out the wheel
F Unscrew  the   central   nut.
F  R emove   the   fixing   (nut   and   screw).
F
 
L
ift   the   spare   wheel   towards   you   from   the  
r

e a r.
F
 
R
emove   the   wheel   from   the   boot. As the spare wheel is narrower than the
wheels on the vehicle, in the event of a
puncture,
  the   punctured   wheel   must   be  
c

arried   in   the   boot.
The
  spare   wheel   is   located   in   the   boot   under   the   floor.
Access to the spare wheel
Putting the spare wheel back in
place
F Return
  the   wheel   to   its   housing.
F  U nscrew   the   nut   a   few   turns   on   the   screw.
F
 
P
osition   the   fixing   (nut   and   screw)   in   the  
m

iddle   of   the   wheel.
F
 
F
ully   tighten   the   central   nut   to   secure   the  
w

heel   correctly. F
 R eturn   the   box   to   its   position   in   the   middle  
o

f   the   wheel.
In the event of a breakdown

291
Spare wheelProcedure for changing a wheel with a punctured tyre for the spare wheel using the tools provided with the vehicle.
S
ome
 
of
 
the
 
tools   are   accessible   from   inside  
t

he
 
boot.
The
 
wheel
 
chock   2 as well as the wheelbrace
extension
 6

 
are   stowed   under   the   right   hand  
b

oot
 
sill
 
trim.
The wheelbrace 1
  and   the   towing   eye   7 are
stowed
 
under
 
the   left   hand   boot   sill.
Access to the tools*2. Wheel  chock   for   immobilising   the   vehicle  (
except   versions   with   manual   gearbox).
3.
 J

ack   with   integral   handle.
 F

or   raising   the   vehicle.
4.
 W

heel   bolt   cover   remover.
 F

or   removing   the   wheel   bolt   covers   on   alloy  
w

heels.
5.
 S

ocket   for   the   security   bolts   (stowed   in   the  
g

love   box).
 F

or   adapting   the   wheelbrace   to   the   special  
s

ecurity   bolts.
6.
 W

heelbrace
 e
xtension.
 F

or   lowering/raising   the   spare   wheel  
c

a r r i e r.
7.
 T

owing   eye.
Wheel with trim
When removing the wheel ,   detach   the   trim  f
irst   using   the   wheelbrace   1   pulling   at   the   valve  
p

assage   hole.
When refitting the wheel ,
  refit   the   trim  
s

tarting   by   placing   its   notch   facing   the   valve  
a

nd   press   around   its   edge   with   the   palm   of   your  
han

d.
List of tools*
All of these tools are specific to your vehicle
and  can   vary   according   to   equipment.   Do   not  
u

se   them   for   other   purposes.
1.
 W

heelbrace.
 F

or   removing   the   wheel   trim   and   the   wheel  
f

ixing
 bol
ts. *
  
D
epending   on   version.   A   complete   set   of   tools  
i

s   provided   with   the   spare   wheel.
The
 
other
 
tools,
 
the
 
jack
 
3
 
and
 
the
 
tool
 
for
 r
emoving
 
the
 
wheel
 
bolt
 
covers
 
on
 
alloy
 
w

heels

4 ,
 
are
 
stowed
 
in
 
a
 
box
 
attached
 
to
 
the
 
spar

e
 w

heel.
The
 
assembly
 
is
 
secured
 
under
 
the
 
vehicle
 
in
 
a

 
carrier.
8
In the event of a breakdown

295
Removing a wheel
Parking the vehicle
Immobilise the vehicle where it does not block   traffic:   the   ground   must   be   level,  
s

table   and   not   slippery.
Apply
  the   parking   brake   unless   it   has  
b

een   programmed   to   automatic   mode,  
s

witch   off   the   ignition   and   engage   first  
g

ear*   to   block   the   wheels.
Check
  that   the   braking   warning   lamp  
a

nd   the   P   warning   lamp   in   the   parking  
b

rake   control   lever   come   on.
For
  greater   safety,   place   the   chock   2
against
  the   wheel   opposite   to   the   one  
b

eing
 c
hanged.
The
  occupants   must   get   out   of   the  
v

ehicle   and   wait   where   they   are   safe.
Never
  go   underneath   a   vehicle  
s

upported   by   a   jack;   use   an   axle   stand.
List of operations
F Remove  the   wheel   bolt   cover(s)   using   the  t
ool 4   (depending   on   equipment).
F
 
F
it   the   security   socket   5 on the
wheelbrace


1   to   slacken   the   security   bolt  
(

if fitted).
F
 
S
lacken   the   other   bolts   (no   more   than   a  
1

/4 turn)   using   the   wheelbrace   1  
o
n l y.
* Position P
 
for
 
an
 
automatic
 
gearbox. Do
  not   use:
-
 
t
he   jack   for   any   purpose   other   than  
l

ifting   the   vehicle,
-
 
a
ny   other   jack   than   the   one  
s

upplied   by   the   manufacturer.F
 
P
lace   the   foot   of   the   jack   3   on   the   ground  
a

nd   check   that   it   is   directly   below   the  
f

ront A or rear B   jacking   point   provided   on  
t

he   underbody,   whichever   is   closest   to   the  w
heel   to   be   changed.
Ensure   that   the   jack   is   stable.   If   the  
g

round   is   slippery   or   loose,   the   jack  
m

ay   slip   or   drop   -   Risk   of   injury!
Ensure
  that   the   jack   is   positioned   only  
a

t   one   of   the   jacking   points   A or B
under
  the   vehicle,   making   sure   that   the  
v

ehicle's   contact   sur face   is   centred   on  
t

he   head   of   the   jack.   Other wise   there   is  
a

  risk   of   damage   to   the   vehicle   and/or   of  
t

he   jack   dropping   -   Risk   of   injury!
8
In the event of a breakdown