DS5_en_Chap08_info-pratiques_ed02-2015
Towing your vehicleTowing another vehicle
F On the front bumper, unclip the cover
b
y pressing at the top to disengage the
securing lugs.
F
Sc
rew the towing eye in fully.
F
In
stall the towing arm. F On t
he rear bumper, unclip the cover by
levering at the left with the point of the
towing eye.
F
Sc
rew the towing eye in fully.
F
In
stall the towing arm.
F
Sw
itch on the hazard warning lamps on
both vehicles.
F
Mov
e off gently and drive at low speed and
for a short distance only.
F
Pl
ace the gear lever in neutral
(position N with an automatic
gearbox).
Fa
ilure to follow this advice could
result in damage to certain systems
(braking, transmission...) and the
absence of braking assistance the
next time the engine is started.
F Un lock the steering and release the
parking brake.
F
Sw
itch on the hazard warning lamps on
both vehicles.
F
Mov
e off gently and drive at low speed and
for a short distance only.
DS5_en_Chap11d_RD5_ed02-2015
RdS
Select "RdS" a nd confirm to save.
" RdS " i
s displayed in the screen.
When the radio is displayed on the
screen, press OK
to display the
contextual menu.
Select or deselect categories to
activate or deactivate the reception of
the corresponding messages. Make a long press on TA I N FO to
display the list of categories.
Press TA I N FO
to activate or
deactivate the reception of traffic
messages.
RDS, if displayed, enables you to continue
listening to the same station by automatic
retuning to alternative frequencies.
However, in certain conditions, coverage
of an RDS station may not be assured
throughout the country as radio stations
do not cover 100
% o
f the territory. This
explains the loss of reception of the station
during a journey.
Receiving TA messages
The TA (Traffic Announcement)
function gives priority to TA alert
messages. To operate, this function
needs good reception of a radio station
transmitting this type of message.
When a traffic report is transmitted,
the current audio source (Radio, CD,
USB,
.
..) is interrupted automatically to
play the TA message. Normal playback
of the audio source resumes at the end
of the transmission of the message. The INFO function gives priority to
TA alert messages. To be active, this
function needs good reception of a
radio station that transmits this type
of message. When a message is
transmitted, the current audio source
(Radio, CD, USB, ...) is interrupted
automatically to receive the INFO
message. Normal play resumes at the
end of the message transmission.
Receiving INFO messages
