2016 Citroen DS5 HYBRID lock
[x] Cancel search: lockPage 316 of 376
v
W
T
Ventilation .................................................
89, 90
Visibility ........................................................... 95
W
arning and indicator lamps
..................... 19
- 31
Warning lamp, braking system
....................... 27
W
arning lamp, Diesel engine pre-heater
....... 21
War
ning lamps
.................................... 21
, 24, 26
Warning lamp, SCR emissions control system
........................................................... 3
0
Warning lamp, Service.................................... 25
Washing (advice) ................................... 138, 233
Weights
.................................................
265, 269
Wheel, spare
......................................... 20
2, 203
Window controls
............................................. 66
Wip
er blades (changing)
....................... 15
6, 228
Wiper, rear ..................................................... 15 4
Wipers
............................................. 22
, 153, 155
Wipers, automatic rain sensitive
........... 153
, 155
U
Under-inflation (detection) ............................11 6
U nlocking .................................................. 52, 54
Unlocking from the inside
............................... 61
Ta
ble of weights
....................................26
5, 269
Tables of engines
..................................
264, 267
Tables of fuses
.............................................. 219
T
ank, AdBlue
® additive ......................... 25
3, 258
Tank, fuel ............................................... 239, 242
Technical data
....................................... 26
4-276
Temperature, coolant
...................................... 32
Th
ird brake lamp
........................................... 218
T
hree flashes (direction indicators)
.............. 180
T
ime (setting)
......................................
38, 39, 42
To o l s
......................................................
202, 203
Topping-up the AdBlue
® additive ................. 258
T
otal distance recorder ................................... 37
To
uch screen ................................. 38, 43, 45, 47
To w b a r
........................................................... 2
31
Towed loads
..........................................26
5, 269
Towing another vehicle
................................. 230
T
raction control (ASR)
............................ 27
, 182
Traffic information (TA)
................................. 286
Tr
a i l e r
......................................................
99, 231
Trajectory control systems
............................ 182
T
riangle, warning ............................................. 88
Trip computer
............................................ 46-
48
Trip distance recorder
..................................... 37
Ty
r e s
........................................................ 14
, 276
Tyre under-inflation detection
....................... 11 6U
nlocking the boot
..........................................
53
Un
locking the doors
........................................
61
URE
A
....................................................
253, 254
USB player
...................................................... 85
Page 341 of 376
15Hybrid4 system
Starting the Hybrid4 system
Activation of the Hybrid4 system
On activation of the Hybrid4 system, the
instrument panel lights up, the power indicator
needle is placed at position " 0
". The steering
column automatically unlocks (perceptible
noise and movement of the steering column).
Depending on certain parameters, such as the
state of charge of the high voltage battery or
the ambient temperature, the Hybrid4 system
itself determines whether it is necessary to
start the HDi Diesel engine.
The mode selector is at the AUTO
position.
In wintry conditions with the
engine cold, the Diesel pre-
heating warning lamp can stay
on for a few seconds; wait until
it goes off before releasing the
brake pedal.
Starting - switching off the Hybrid4 system
Never leave children alone inside the
vehicle when the Hybrid4 system is
active.
)
Place the gear selector at position N
.
)
Insert the electronic key in the reader.
or
)
With Keyless Entry and Starting, simply
having the electronic key inside the vehicle
is sufficient.
)
Press the brake pedal firmly.
)
Make a single short press (about one
second) on the " START/STOP
" button.
)
Maintain pressure on the brake pedal until
the READY
lamp comes on, signalling
activation of the Hybrid4 system, confirmed
by an audible signal.
If the Hybrid4 system does not activate:
)
If N
is flashing in the instrument
panel, move the gear selector to
position A
then to position N
.
)
If the " Foot on the brake
" is
displayed, press the brake pedal
firmly.
The READY
lamp may come on after
a few seconds if there is a demand
for activation of the Hybrid4 system
after energy economy mode has been
entered.
Page 343 of 376
17Hybrid4 system
Switching off the Hybrid4 system
)
Immobilise the vehicle.
)
Place the gear selector in position N
.
)
Make a short press (about one second) on
the " START/STOP
" button.
The Hybrid4 stops:
- the READY
lamp goes off,
- the steering column locks,
- the electric parking brake is applied
automatically, unless its automatic mode is
deactivated.
)
Check that the parking brake warning
lamps are on.
)
Remove the electronic key from the reader.
Before doing anything under the
bonnet, the Hybrid4 must be switched
off ( READY
lamp off) and the electric
parking brake must be applied.
Check that the READY
lamp is off
before leaving the vehicle.
Never leave the electronic key in the
vehicle in your absence.
For reasons of safety and theft protection,
do not leave your electronic key in the
vehicle, even when you are close to it.
It is recommended that you keep it on
your person.
Switching the ignition on
With the electronic key in the reader or the
Keyless Entry and Starting key inside the
vehicle, pressing the " START/STOP
" button,
with no action on the brake pedal
, allows the
ignition to be switched on.
)
Press the " START/STOP
"
button, the instrument panel
comes on but the Hybrid4 system
does not start up.
With the ignition on, the system goes
into energy economy mode when
necessary to maintain the state of
charge of the battery.
)
Press this button again to switch off the
ignition and so allow the vehicle to be
locked.
Page 344 of 376
Back-up starting / emergency switching off
Back-up starting with the
Keyless Entry and Starting
system
When the electronic key is in the recognition
zone and after pressing the " START/STOP
"
button, the Hybrid4 system does not start up:
)
Insert the electronic key in the reader.
)
Place the gear selector at position N
.
)
Press the brake pedal firmly.
)
Press the " START/STOP
" button.
The Hybrid4 starts up; the READY
lamp is on.
Electronic key not recognised
with Keyless Entry and Starting
If the electronic key is no longer in the
recognition zone when driving or when you
(later) request switching off of the Hybrid4
system, a message appears in the instrument
panel.
)
Press and hold the " START/STOP
" button
for about 3 seconds if you want to force the
Hybrid4 system to switch off. In the event of an emergency only, the engine
can be switched of without any conditions.
)
To do this, press and hold the " START/
STOP
" button for about 3 seconds.
In this case the steering column locks as soon
as the vehicle stops.
The electronic key must always remain
inside the vehicle when in use.
Emergency switching off
Note that restarting will not be possible
without the presence of the electronic
key in the recognition zone.
Page 363 of 376
37Practical information
Temporary puncture repair kit
This kit comprises a compressor and a sealant cartridge.
It allows you to carry out a temporary repair
to a tyre.
This makes it possible to continue to the nearest garage.
It can be used for for repairing most
punctures on the tread or shoulder of
the tyre.
The compressor can be used to check
and adjust a tyre pressure.
For more information on the use of this
temporary puncture repair kit, refer
to the corresponding section in the
handbook for the vehicle.
All of these tools are specific to your
vehicle.
Do not use them for other purposes.
Access to the kit
List of tools
1.
12 V compressor.
Contains a sealant cartridge for the
temporary repair of a tyre and can also be
used for adjusting tyre pressures.
2.
Chock.
For blocking the wheels of the vehicle.
3.
Wheel bolt cover remover.
For removing the wheel bolt head
protectors on alloy wheels.
4.
Wheel trim remover.
For removing the wheel bolt finishers on
alloy wheels.
5.
Removable towing eye.
This kit is installed in the storage box, under the
boot floor.