2016 Citroen DS5 HYBRID reset

DS5_en_Chap04_conduite_ed02-2015
Memorising speeds
Activating the function
Modifying a speed setting
With your Audio system
"MEM" button
F Press this button to display the list of
memorised speed settings.
By offering preset speed settings, this function facilitates the programming of a speed setting for both the speed limiter and the cruise
control.
The system includes up to 5 or 6 speeds, depending on equipment, that you can modify.
As a safety measure, the driver must
only modify the speed settings when
stationary.
F
Go t

o the main menu by pressing the
"MENU" button:
F Selec
t the"Personalisation-configuration"
menu and confirm.
F
Se

lect " Vehicle parameters" menu and
confirm.
F
Se

lect the "Driving assistance" line and
conform.
F
Se

lect "Speeds memorised" line and
confirm.
F
Se

lect "Activation" to activate the function. F
Se

lect the speed setting to be modified and
confirm.
F Mo
dify the speed setting.
F
Selec

t " OK " and confirm to save the
modifications.

DS5_en_Chap08_info-pratiques_ed02-2015
disconnecting the battery
In order to maintain an adequate state
of charge for starting the engine, it is
recommended that the battery be disconnected
if the vehicle is taken out of service for a long
period.
Wait 2 minutes after switching off the ignition
before disconnecting the battery.
F
cl
ose the windows and the doors before
disconnecting the battery,
F
sw

itch off all electrical consumers (audio
system, wipers, lighting, ...),
F
sw

itch off the ignition and wait for
four
mi

nutes.
Having exposed the battery, it is only
necessary to disconnect the (+) terminal.
Quick release terminal
dis

connecting the (+) terminal
F Raise the lever A fully to release the
c lamp B.
Following reconnection of the battery
Reconnecting the (+) terminal
F Position the open clamp B of the cable on
t
he positive post (+) of the battery.
F
Pr

ess down on the clamp to position it
correctly on the battery post.
F
Lo

ck the clamp by lowering the lever A .
Do not force the lever as locking will
not be possible if the clamp is not
positioned correctly; start the procedure
again. The Stop & Start system may not be
operational during the trip following the
first engine start.
In this case, the system will only be
available again after a continuous
period of immobilisation of the vehicle,
a period which depends on the ambient
temperature and the state of charge of
the battery (up to about 8 hours).
After reconnecting the battery, switch on the
ignition and wait 1 minute before starting to
allow initialisation of the electronic systems.
However, if minor problems persist following
this operation, contact a CITROËN dealer or a
qualified workshop.
Referring to the corresponding section, you
must yourself reinitialise or reset certain
systems, such as:
-
th

e remote control or electronic key
(depending on version),
-
th
e electric blind(s),
-
th
e electric windows
-
th
e date and time,
-
th
e radio preset stations.

DS5_en_Chap11d_RD5_ed02-2015
First steps
On / Off.
Vo lume adjustment.
Select preset radio station.
Long press: store a station. Display the list of stations received,
CD/MP3 t
racks or folders.
Long press: managing the
classification of MP3/ WMA files
/
u

pdate the list of stations received.
Audio settings:
audio ambiences, treble, bass,
loudness, distribution, left /right
balance, front /rear fader, automatic
volume. TA (Traffic Announcement) function
On
/ O

ff.
Long press: access to type of
information. Automatic search up
/ d

own for radio
frequencies.
Select previous / n ext CD, USB,
streaming track.
Navigation in a list.
Access to main menu. Abandon the current operation.
Up one level (menu or folder). Confirmation or display of contextual
menu.
Manual step by step search up
/
d
own for radio frequencies.
Select previous
/ n
ext MP3
f
older.
Select previous
/ n
ext folder
/ g
enre
/
a
rtist
/ p
laylist in the USB device.
Navigation in a list.
Select AM / FM wavebands.
Select source:
Radio, CD, AUX, USB, Streaming.
Accept an incoming call. Select screen display between modes:
Full screen: Audio (or telephone if call
in progress)
/
I

n a window: Audio (or telephone
if call in progress)
- T

ime or Trip
computer.
Long press: black screen (DARK).

Instrument panel


*
By successive presses on the end of the
wiper control stalk.

1.
Power indicator (%).
Display of the percentage of the total power
available supplied by the Hybrid4 system,
or the energy recovered.

2.
Selector position and gear engaged for the
electronic gearbox or gear shift indicator.

3.
Speed limiter or cruise control settings.

4.
READY lamp: indicates that the vehicle is
ready to drive.

Control buttons

Dials and screens



A.
Main lighting and controls dimmer.

B.
- Successive short presses: under-inflation
detection, recall ser vicing information,
alert log.
- Long press: reset the function selected to
zero (ser vice indicator or trip recorder).

5.
Engine coolant temperature gauge
(°Celsius).

6.
Analogue speedometer (mph or km/h).

7.
Digital speedometer (mph or km/h).

8.
Fuel gauge.

9.
Instrument panel screen:
- permanent display of distance recorders,
and, as desired * : trip computer, energy
flows, current media playing or navigation
instructions,
- temporary display: ser vice indicator,
engine oil level indicator, alert messages.

13Hybrid4 system
Tr i p c o m p u t e r


System that gives you information on the current journey (range, fuel consumption…).












Instrument panel screen



Information display



)
Press the end of the wiper control stalk
to
display the various tabs in succession.



- The current information tab with:


●
the range,

●
the current instantaneous fuel
consumption.





- Tr i p "1"
with:


●
the average speed,

●
the average fuel consumption,
for the first trip.





- Tr i p "2"
with:


●
the average speed,

●
the average fuel consumption,
for the second trip.


Trips "1"
and "2"
are independent but their use
is identical.
For example, trip "1"
can be used for daily
figures, and trip "2"
for monthly figures.


- The energy flows.


Resetting the trip recorder



)
When the desired trip is displayed, press
the end of the wiper control stalk for more
than two seconds.



Resetting the histogramme
(Only with touch screen)



)
When trip "2"
is displayed, press the end
of the wiper control stalk for two seconds to
reset the fuel consumption histogramme.


- The radio or media playing.

- Navigation instructions.

Touch screen


Information display


The current instantaneous fuel consumption tab with:


- the range,

- the current fuel consumption.


The trip "1"
tab with:


- the average speed,

- the average fuel consumption,
for the first trip.


The trip "2"
tab with:


- the average speed,

- the average fuel consumption,
for the second trip.


The energy flows.
The fuel consumption histogram.




Trip reset



)
Select the "

Driving " menu.
The trip computer information is displayed in
the primary page of the menu.


)
Press one of the buttons to display the
desired tab.


)
When the desired trip is displayed,
press the reset button or press and
hold the end of the wiper control stalk.

Trips "1"
and "2"
are independent but their use
is identical.
For example, trip "1"
can be used for daily
figures, and trip "2"
for monthly figures.


Resetting the histogram



)
When trip "2"
is displayed, pressing
the reset button also resets the fuel
consumption histogram.




1.
"Instantaneous".


2.
"Trip 1".


3.
"Trip 2".


4.
"Hybrid".


5.
"Histogram".


6.
"00.0 / Reset".

Ventilation, high voltage battery ..................... 29
Washing (advice)............................................. 36
Weights ........................................................... 41
Table of weights .............................................. 41
Tables: of engine, motor ........................... 39, 40
Technical data ............................................39 - 41
Tools ................................................................ 37
Touch screen....................................... 10, 12, 14
Towed loads .................................................... 41
Towing eye ...................................................... 37
Triangle, warning............................................. 31
Trip computer ............................................. 12-14
Ty r e s ................................................................ 37 Selector, gear ............................................ 32, 36
Snow chains .................................................... 38
Speedometer .................................................... 8
Starting the Hybrid4 system ..................... 15, 18
State of charge, battery .................. 5, 10, 25, 27
Stop & Start ....................................... 4, 6, 11, 27
Storage ............................................................ 31
Switching off the Hybrid4 system ............. 15, 18 READY lamp ..................................... 8, 9, 28, 30
Recovery of the vehicle .................................. 38
Regeneration of the particle filter ............... 5, 26
Reset histogramme ......................................... 14
Reset trip ................................................... 13, 14
Retaining strap ................................................ 31
V
W
T S R