2016 Citroen DS3 RHD reset

System which informs the driver when the next   service   is   due,   in   accordance   with   the  
ma

nufacturer's
 ser
vicing
 s
chedule.
Service indicator
Between 600 miles (1 000 km)
and 1 800 miles (3 000 km) remain
before the next service is due
For 5 seconds after the ignition is switched on, the   spanner   symbolising   the   service   operations  
c

omes   on.   The   distance   recorder   display   line  
i

ndicates   the   distance   remaining   before   the  
n

ext   service   is   due.
Example:
 

1   739   miles   (2   800   km)   remain  
b

efore   the   next   service   is   due.
For
  5   seconds   after   the   ignition   is   switched   on,  
t

he   screen   indicates:
5
  seconds   after   the   ignition   is   switched   on,  
t

he spanner goes off ;
  the   distance   recorder  
r

esumes   its   normal   operation.   The   screen   then  
i

ndicates   the   total   distance.
For
 
BlueHDi
 
Diesel
 
versions,
 
the
 
d

egree
 
of
 
deterioration
 
of
 
the
 
engine
 
oil
 
i

s
 
also
 
taken
 
into
 
account
 
(depending
 
o

n
 
the
 
country
 
of
 
sale).
The
 
point
 
at
 
which
 
the
 
next
 
service
 
is
 
due
 
is
 
c

alculated
 
from
 
the
 
last
 
indicator
 
zero
 
reset,
 
d

epending
 
on
 
the
 
distance
 
travelled
 
and
 
the
 
t

ime
 
elapsed
 
since
 
the
 
last
 
service.
More than 1 800 miles (3 000 km)
remain before the next service is
due
When the ignition is switched on, no service i nformation   appears   in   the   screen.

Service indicator zero reset
After each service, the service indicator must be   reset   to   zero.
The
  procedure   for   resetting   to   zero   is   as  
f

ollows:
F
 
s
witch   off   the   ignition,
F
 
p
ress   and   hold   the   trip   distance   recorder  
z

ero reset button,
F
 
s
witch  
o
n  
t
he  
i
gnition;  
t
he  
d
istance  
r
ecorder  
d

isplay   begins   a   countdown,
F
 
w
hen   the   display   indicates   "=0", release
the
  button;   the   spanner   disappears. Following
  this   operation,   if   you   wish   to  
d

isconnect   the   battery,   lock   the   vehicle  
a

nd   wait   at   least   five   minutes   for   the  
z

ero   reset   to   be   taken   into   account.
Retrieving the service
information
You can access the service information at any t
ime.
F
 
P
ress   the   trip   distance   recorder   zero   reset  
b

utton.
 T

he   service   information   is   displayed   for   a  
f

ew   seconds,   then   disappears.

Trip computer
Monochrome screen A
Information displays
F Press  the   button,   located   at   the   end   of   the  w
iper stalk ,
  to   display   the   various   items   of  
t

rip   computer   information   in   succession.The
  trip   computer   provides   the   following  
i

nformation:
-
 ra
nge,
-  
c
urrent   fuel   consumption,
-  
S
top   &   Start   time   counter,
-  d istance   travelled,
-  
a
verage   fuel   consumption,-
 a

verage
 s
peed.
F  
T
he   next   press   then   returns   you   to   the  
n

ormal
 d
isplay.
System   that   gives   you   information   on   the   current   journey   (range,   fuel   consumption…).
Trip reset
F Press
  the   control   for   more   than   two  s
econds   to   reset   to   zero   the   distance  
t

ravelled,   the   average   fuel   consumption  
a

nd   the   average   speed.

55
Monochrome screen C
Information displays
F Press  the   button,   located   at   the   end   of  t
he wiper stalk ,
  to   display   the   various   trip  
c

omputer   tabs   in   succession. -
 
t
he   current   information   tab  
w

ith:
●  
t
he   range,
●  
t
he   current   fuel  
c

onsumption,
●  
t
he   distance   remaining  
to   be   travelled   or   the  
Stop   &   Start   time   counter.
-  
t
he   trip   "1"
 
tab   with:
●  
t
he   distance   travelled,
●  
t
he   average   fuel  
c

onsumption,
●  t he   average   speed, f
or   the   first   trip.
-
 
t
he   trip   "2"
 
tab   with:
●
 
t
he   distance   travelled,
●
 
t
he   average   fuel  
c

onsumption,
●
 
t
he   average   speed,
 f

or   the   second   trip.
F
 
P
ressing   the   button   again   returns   you   to  
t

he   normal   display.
Trip reset
F When  the   trip   required   is   displayed,   press  t
he   button   on   the   end   of   the   wiper   stalk   for  
m

ore   than   two   seconds.
Tr i p s "1"
 

and   "2"
 
are   independent   but   their   use  
i

s   identical.
For
  example,   trip   "1"
 
can   be   used   for   daily  
f

igures,   and   trip   "2"
 
for   monthly   figures.
Monitoring

Touch screen tablet
Information display
F Press the MEnU button, then select
"dr iving",
  to   display   the   various   tabs.
F
 
S
elect   the   desired   tab   using   your   finger.-
 
T
he   "
Instantaneous "   tab   with:
●  
t
he   range,
●  
t
he   current   fuel   consumption,
●  
t
he   Stop   &   Start   time   counter.
-  
t
he   "
Tr i p 1 "   tab   with:
●  
t
he   distance   travelled,
●  
t
he   average   fuel   consumption,
●  
t
he   average   speed,  
 
f
or   the   first   trip.
-  
t
he   "Tr i p 2 "
  tab   with:
●
 
t
he   distance   travelled,
●
 
t
he   average   fuel   consumption,
●
 
t
he   average   speed,  
 
f

or   the   second   trip.
Trip reset
F When  the   desired   trip   is   displayed,   press  t
he   reset   button.
Tr i p s "1"
 

and   "2"
 
are   independent   but   their   use  
i

s   identical.
For
  example,   trip   "1"
 
can   be   used   for   daily  
f

igures,   and   trip   "2"
 
for   monthly   figures.

57
A few definitions
Range
(miles or km)
Current fuel consumption
(mpg or l/100 km or km/l)
Stop & Start time
counter
(minutes / seconds or hours / minutes)
This
 
value
 
may
 
vary
 
following
 
a
 
change
 
i

n
 
the
 
style
 
of
 
driving
 
or
 
the
 
relief,
 
r

esulting
 
in
 
a
 
significant
 
change
 
in
 
the
 
c

urrent
 
fuel
 
consumption.
If
 
dashes
 
are
 
displayed
 
continuously
 
w

hile
 
driving
 
in
 
place
 
of
 
the
 
digits,
 
c

ontact
 
a
 
CITROËN
 
dealer
 
or
 
a
 
q

ualified
 w

orkshop.
When
 
the
 
range
 
falls
 
below
 
20
 
miles
 
(30
 
km),
 
d

ashes
 
are
 
displayed.
 
After
 
filling
 
with
 
at
 
least
 
5

 
litres
 
of
 
fuel,
 
the
 
range
 
is
 
recalculated
 
and
 
is
 
d

isplayed
 
when
 
it
 
exceeds
 
60
 
miles
 
(100
 
km).
distance remaining to
destination
(miles or km)
T
he
 
distance
 
which
 
can
 
still
 
be
 
travelled
 
with
 
t

he
 
fuel
 
remaining
 
in
 
the
 
tank
 
(related
 
to
 
the
 
a

verage
 
fuel
 
consumption
 
over
 
the
 
last
 
few
 
m

iles
 (

kilometres)
 t

ravelled). Calculated
 
over
 
the
 
last
 
few
 
seconds.
This
 
is
 
the   distance   remaining   to   be   travelled  
t

o
 
the
 
final   destination.   It   can   be   entered   by  
t

he user.
If
 
the
 
distance   is   not   entered,   dashes   are  
d

isplayed
  in   place   of   the   digits.
If
 
your
 
vehicle   is   fitted   with   Stop   &   Start,   a   time  
c

ounter
 
calculates   the   time   spent   in   STOP  
m

ode
 
during   a   journey.  
I

t
 
resets
 
to   zero   every   time   the   ignition   is  
s

witched
 
on   with   the   key.
distance travelled
(miles or km)
C
alculated
 
since   the   last   trip   reset.
Average speed
(mph or km/h)
C
alculated   since   the   last   trip   reset.
Average fuel
consumption
(mpg or l/100 km or km/l)
C
alculated
 
since   the   last   trip   reset.
This
 
function   is   only   displayed   from  
2

0 mph
  (30   km/h).
Trip computer
Monitoring

disconnecting the battery
In order to maintain an adequate state of   charge   for   starting   the   engine,   it   is  
r

ecommended   that   the   battery   be   disconnected  
i

f   the   vehicle   is   taken   out   of   service   for   a   long  
p

eriod.
Wait
  2   minutes   after   switching   off   the   ignition  
b

efore   disconnecting   the   battery:
F
 
c
lose   all   openings   (doors,   boot,   windows,  
r

oof   (for   Cabrio   versions)),
F
 
s
witch   off   all   electrical   consumers   (audio  
s

ystem,   wipers,   lighting,   ...),
F
 
s
witch   off   the   ignition   and   wait   for  
f

our minutes.
Having
  exposed   the   battery,   it   is   only  
n

ecessary   to   disconnect   the   (+)   terminal.
Following reconnection of the
battery
After reconnecting the battery, switch on the ignition   and   wait   1   minute   before   starting   to  
a

llow   initialisation   of   the   electronic   systems.
However,
  if   minor   problems   persist   following  
t

his   operation,   contact   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Referring
  to   the   corresponding   section,   you  
m

ust   yourself   reinitialise   or   reset   certain  
s

ystems,   such   as:
-
 
t
he   remote   control,
-
 
t
he   electric   windows,
-
 
t
he   date   and   time,
-
 
t
he   radio   preset   stations.
Quick release terminal
di
sconnecting the (+) terminal
F Raise the lever A fully to release the clamp  B.
Reconnecting the (+) terminal
F Position   the   open   clamp   B of the cable on
the   positive   post   (+)   of   the   battery.
F
 
P
ress   down   on   the   clamp   to   position   it  
c

orrectly   on   the   battery   post.
F
 
L
ock   the   clamp   by   lowering   the   lever   A. The
  Stop   &   Start   system   may   not   be  
o

perational   during   the   trip   following   the  
f

irst   engine   start.
In
  this   case,   the   system   will   only   be  
a

vailable   again   after   a   continuous  
p

eriod   of   immobilisation   of   the   vehicle,  
a

  period   which   depends   on   the   ambient  
t

emperature   and   the   state   of   charge   of  
t

he   battery   (up   to   about   8   hours).
Do
  not   force   the   lever   as   locking  
w

ill   not   be   possible   if   the   clamp   is  
n

ot   positioned   correctly;   start   the  
p

rocedure   again.

Steering mounted controls
Radio: select the previous/next preset s tation.
Media:
  select   a   genre   /   artist   /   folder  
f

rom   the   list.
Select
  the   previous/next   entry   in   a  
m

enu.
Decrease
  volume.
Radio:
  automatic   search   for   a   higher  
f

requency.
Media:
  Select   next   track.
Media,
  press   and   hold:   fast   for ward.
Jump
  in   the   list. Mute:
  cut   the   sound   by   pressing  
t

he   volume   increase   and   decrease  
bu

ttons
 s
imultaneously.
Restore
  the   sound   by   pressing   one   of  
t

he   two   volume   buttons.
Radio:
  automatic   search   for   a   lower  f
requency.
Media:
  select   previous   track.
Media,
  press   and   hold:   fast   back.
Jump
  in   the   list.
Change
  the   audio   source.
Confirm
  a   selection.
Call/end
  call   on   the   telephone.
Press
  for   more   than   2   seconds:  
a

ccess   to   the   telephone   menu. Increase
  volume.