2016 Citroen DS3 RHD display

125
going into engine START mode
The "ECO" warning   lamp   goes   off  a
nd   the   engine   starts:
-
 
w

ith a manual gearbox , when you
depress
  the   clutch   pedal,
-
 
w

ith an electronic or automatic
gearbox :
●
 
g

ear   selector   in   position   A / d or M,
when
  you   release   the   brake   pedal,
●
 
o

r
 
gear   selector   in   position  n  and   the  
b

rake   pedal   released,   when   you   move  
t

he
  gear   selector   to   position   A / d or M,
●
 
o

r
 
when   you   engage   reverse   gear.
Special cases: START invoked
automatically
For reasons of safety and for your comfort, START   mode   is   invoked   automatically   when:
-
 
y
ou   open   the   driver's   door,
-
 
y
ou   unfasten   the   driver's   seat   belt,
-
 
t
he   speed   of   the   vehicle   exceeds   7   mph  
(11
  km/h)   with   the   electronic   gearbox  
s

ystem,
-
 
s
ome   special   conditions   (battery   charge,  
e

ngine   temperature,   braking   assistance,  
a

mbient   temperature...)   where   the   engine   is  
n

eeded   for   control   of   a   system.
The "ECO"
 

warning   lamp   flashes   for  
a

  few   seconds,   then   goes   off.
This operation is perfectly normal.
With
 
a
 
manual
 
gearbox
 
in
 
STOP
 
m

ode,
 
if
 
you
 
engage
 
a
 
gear
 
without
 
f

ully
 
depressing
 
the
 
clutch
 
pedal,
 
a
 
m

essage
 
is
 
displayed
 
asking
 
you
 
to
 
f

ully
 
depress
 
the
 
clutch
 
pedal
 
so
 
that
 
t

he
 
engine
 
can
 
restart.
STOP
 
mode
 
is
 
not
 
invoked
 
when:
-
 t
he
 
driver's
 
door
 
is
 
open,
-
 
t

he
 
driver's
 
seat
 
belt
 
is
 
not
 
fastened,
-
 
t

he
 
vehicle
 
has
 
not
 
exceeded
 
6
 
mph
 

(10
 
km/h)
 
since
 
the
 
last
 
engine
 
start
 
using
 
t

he
 
key,
-
 
t

he
 
engine
 
is
 
needed
 
to
 
maintain
 
a
 
c

omfortable
 
temperature
 
in
 
the
 
passenger
 
c

ompartment,
-
 
d

emisting
 
is
 
active,
-
 
s

ome
 
special
 
conditions
 
(battery
 
charge,
 
e

ngine
 
temperature,
 
braking
 
assistance,
 
a

mbient
 
temperature...)
 
where
 
the
 
engine
 
is
 
n

eeded
 
to
 
assure
 
control
 
of
 
a
 
system.
Special cases: STOP mode not
available
The "ECO"  warning   lamp   flashes   for  a
  few   seconds   then   goes   off.
This operation is perfectly normal.
driving

System which prevents the vehicle from exceeding   the   speed   programmed   by   the  
d

river.
When
  the   programmed   speed   limit   is   reached,  
p

ressing   the   accelerator   pedal   in   the   normal  
m

anner   no   longer   has   any   effect.
The
  speed   limiter   is   switched on
 m
anually:
 it r

equires   a   programmed   speed   of   at   least  
20
  mph   (30   km/h).
The
  speed   limiter   is   switched off
 
by   manual  
o

peration   of   the   control.
The
  programmed   speed   can   be   exceeded  
t

emporarily   by   pressing   the   accelerator   firmly.
To
  return   to   the   programmed   speed,   simply  
s

low   down   to   a   speed   below   the   programmed  
s

peed.
The
 
p
rogrammed  
s
peed  
r
emains  
i
n  
t
he  
m
emory  
w

hen   the   ignition   is   switched   off.
Speed limiter
The speed limiter cannot, in any circumstances,   replace   the   need   to r

espect   speed   limits,   nor   can   it   replace   the
 n

eed   for   vigilance   on   the   part   of   the   driver.The
  controls   of   this   system   are   grouped  
t

ogether   on   stalk   A
.
1.
 S
peed   limiter   mode   selection   thumb   wheel.
2.
 V
alue   decrease   button.
3.
 V
alue   increase   button.
4.
 S
peed   limiter   on   /   off   button.
Steering mounted controls
The programmed information is grouped t
ogether   in   the   instrument   panel   screen.
5.
 S

peed   limiter   on   /   off   indication.
6.
 S

peed   limiter   mode   selection   indication.
7.
 P

rogrammed   speed   value.
displays in the instrument panel

129
F Turn  thumb   wheel   1 to the "LIMIT"
position:   the   speed   limiter   mode   is  
s

elected   but   is   not   switched   on   (PAUSE).
You
  do   not   have   to   switch   the   speed   limiter   on  
i

n   order   to   set   the   speed.
F
 
S
et   the   speed   value   by   pressing   button   2
or 3
  (e.g.:   55   mph   (90   km/h)).
Programming
You can then change the programmed speed using buttons 2 and 3:
-  b y   +   or   -   1   mph   (km/h)   =   short   press,
-
 
b
y   +   or   -   5   mph   (km/h)   =   long   press,
-
 
i
n   steps   of   +   or   -   5   mph   (km/h)   =   maintained   press.
F
 
S
witch   the   speed   limiter   on   by   pressing   button   4.
F
 
S
witch   the   speed   limiter   off   by   pressing   button   4:
  the   display  
c

onfirms   that   it   has   been   switched   off   (PAUSE).
F
 
S
witch   the   speed   limiter   back   on   by   pressing   button   4  
ag
ain.
Exceeding the programmed speed
Pressing the accelerator pedal to exceed the programmed speed will not have any   effect   unless   you   press   the   pedal   firmly past the point of resistance .
The
  speed   limiter   is   deactivated   temporarily   and   the   programmed   speed,
 w

hich   is   still   displayed,   flashes.
Returning
  to   the   programmed   speed,   by   means   of   intentional   or   unintentional
 d

eceleration   of   the   vehicle,   automatically   cancels   the   flashing   of   the
 pro

grammed
 s
peed. On
  a   steep   descent   or   in   the   event   of  s
harp   acceleration,   the   speed   limiter  w
ill not be able to prevent the vehicle
from
  exceeding   the   programmed  
s

peed.
To
  avoid   any   risk   of   jamming   of   the  
ped

als:
-
 
e
nsure   that   the   mat   is   secured  
c

o r r e c t l y,
-
 
d
o   not   fit   one   mat   on   top   of   another.
Leaving limiter mode
F Turn  thumb   wheel   1 to the "0"  position:  t
he   speed   limiter   mode   is   deselected.   The  
d

isplay   returns   to   the   distance   recorder.
Operating fault
In the event of a speed limiter fault, the speed is   cleared   resulting   in   flashing   of   the   dashes.
Have
  it   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
driving

Cruise control
System which automatically maintains the speed   of   the   vehicle   at   the   value   programmed  
b

y   the   driver,   without   any   action   on   the  
a

ccelerator
 ped
al.
The cruise control is switched on
 m

anually:
 it r

equires   a   minimum   vehicle   speed   of   25   mph  
(

40   km/h),   as   well   as   the   engagement   of:
-
 
f
ourth   gear   on   a   manual   gearbox,
-
 
s
econd   gear   on   a   or   automatic   or   electronic  
g

earbox,   in   sequential   mode,
-
 
p
osition   A   on   an   electronic   gearbox   or  
p

osition d  on   an   automatic   gearbox.
The cruise control is switched off
 m

anually
 o

r   by   pressing   the   brake   or   clutch   pedal   or   on  
t

riggering   of   the   trajectory   control   systems   for  
s

afety   reasons.
It
  is   possible   to   exceed   the   programmed   speed  
t

emporarily   by   pressing   the   accelerator   pedal.
To
  return   to   the   programmed   speed,   simply  
r

elease   the   accelerator   pedal.
Switching
  off   the   ignition   cancels   any  
p

rogrammed   speed   value. The
  controls   of   this   system   are   grouped  
t

ogether   on   stalk   A.
1.
 C

ruise   control   mode   selection   thumb   wheel.
2.
 V

alue   decrease   button.
3.
 V

alue   increase   button.
4.
 C

ruise   control   off/resume   button.Steering mounted controls
The cruise control cannot, in any
circumstances,  replace   the   need   to r

espect   speed   limits,   nor   can   it   replace   the
 n

eed   for   vigilance   on   the   part   of   the   driver.The
  programmed   information   is   grouped  
t

ogether   in   the   instrument   panel   screen.
5.
  C
ruise   control   off/resume   indication.
6.
  C
ruise   control   mode   selection   indication.
7.
  P
rogrammed   speed   value.
displays in the instrument panel

131
Programming
F Turn  thumb   wheel   1 to the "CRUISE"
position:   the   cruise   control   mode   is  
s

elected   but   is   not   switched   on   (PAUSE).
F
 
S
et   the   programmed   speed   by  
a

ccelerating   to   the   required   speed,   then  
p

ress button 2 or 3   (e.g.:   70   mph  
(110
  km/h)).
You
 
can
 
then
 
change
 
the
 
programmed   speed   using   buttons   2   and   3:
-
 
b

y
 
+
 
or
 
-
 
1
 
mph
 
(km/h)
  =   short   press,
-
 
b

y
 
+
 
or
 
-
 
5
 
mph
 
(km/h)
  =   long   press,
-
 
i

n
 
steps
 
of
 
+
 
or
 
-
 
5
 
mph   (km/h)   =   maintained   press.
F
 
S

witch
 
off
 
the
 
cruise
 
control   by   pressing   button   4:
  the   screen  
c

onfirms
 
that
 
it
 
has
 
been   switched   off   (PAUSE).
F
 
S

witch
 
the
 
cruise
 
control   back   on   by   pressing   button   4  
ag
ain.
Exceeding the programmed speed
Intentional or unintentional exceeding of the programmed speed results in flashing   of   this   speed   in   the   screen.
Return
  to   the   programmed   speed,   by   means   of   intentional   or   unintentional
 d

eceleration   of   the   vehicle,   automatically   cancels   the   flashing   of   the   speed.
Leaving cruise control mode
F Turn  thumb   wheel   1 to the "0"  position:   the   cruise   control   mode   is  d
eselected.   The   display   returns   to   the   distance   recorder.
Operating fault
In the event of a cruise control malfunction, the   speed   is   cleared   resulting   in   flashing   of   the  
d

ashes.   Have   it   checked   by   a   CITROËN   dealer  
o

r   a   qualified   workshop.
When
  the   cruise   control   is   switched   on,  
b

e   careful   if   you   maintain   the   pressure  
o

n   one   of   the   programmed   speed  
c

hanging   buttons:   this   may   result   in   a  
v

ery   rapid   change   in   the   speed   of   your  
v

ehicle.
Do
  not   use   the   cruise   control   on  
s

lippery   roads   or   in   heavy   traffic.
On
  a   steep   descent,   the   cruise   control  
w

ill not be able to prevent the vehicle
from
  exceeding   the   programmed  
s

peed.
To
  avoid   any   risk   of   jamming   of   the  
ped

als:
-
 
e
nsure   that   the   mat   is   secured  
c

o r r e c t l y,
-
 
n
ever   fit   one   mat   on   top   of   another.
driving

Parking sensors
This system indicates the proximity of an obstacle   (person,   vehicle,   tree,   gate,   etc.)  
w

hich   comes   within   the   field   of   detection   of  
s

ensors   located   in   the   bumper.
Certain
  types   of   obstacle   (stake,   roadworks  
c

one,   etc.)   detected   initially   will   no   longer   be  
d

etected   at   the   end   of   the   manoeuvre,   if   they  
a

re   located   in   blind   spots   in   the   sensors'   field  
o

f   detection.
This system cannot in any circumstances replace the   need   for   vigilance   on   the   part   of   the   driver.
Audible assistance
The proximity information is given by an intermittent   audible   signal,   the   frequency   of   which i

ncreases   as   the   vehicle   approaches   the   obstacle.
The
  sound   emitted   by   the   speaker   (right   or   left)
 i

ndicates   the   side   on   which   the   obstacle   is   located.
When
  the   distance   between   the   vehicle   and
 t

he   obstacle   becomes   less   than   approximately
 t

hirty   centimetres,   the   audible   signal   becomes
 c

ontinuous.
Rear parking sensors
Visual assistance*
This supplements the audible signal by d isplaying   bars   in   the   screen   which   move  
p

rogressively   nearer   to   the   vehicle.
When
  the   obstacle   is   very   close,   the   "Danger"  
s

ymbol   is   displayed   in   the   screen.
The
 
system
 
is
 
switched
 
on
 
by
 
engaging
 
reverse
 
g

e a r.
This
 
is
 
confirmed
 
by
 
an
 
audible
 
signal.
The
 
system
 
is
 
switched
 
off
 
when
 
you
 
come
 
out
 
o

f
 
reverse
 
gear.
*  Depending   on   version.

133
Front parking sensors*Operating fault
In the event of a malfunction of the s
ystem, w hen r everse g ear i s enga ged t

his
 
warning
  lamp   is   displayed   in   the   instrument
 p

anel
 
and/or
  a   message   appears   in   the   screen,
 a

ccompanied   by   an   audible   signal   (short   beep).
Contact
 
a
 
CITROËN   dealer   or   a   qualified
 w

orkshop.In addition to the rear parking sensors, the f ront   parking   sensors   are   triggered   when   an  
o

bstacle   is   detected   in   front   and   the   speed   of  
t

he   vehicle   is   still   below   6   mph   (10   km/h).
The
  front   parking   sensors   are   interrupted   if  
t

he   vehicle   stops   for   more   than   three   seconds  
i

n   for ward   gear,   if   no   further   obstacles   are  
d

etected   or   when   the   speed   of   the   vehicle  
e

xceeds   6   mph   (10   km/h).
The
  sound   emitted   by   the   speaker  
(

front   or   rear)   indicates   whether   the  
o

bstacle   is   in   front   or   behind. In
  bad   weather   or   in   winter,   ensure  
t

hat   the   sensors   are   not   covered   with  
m

ud,   ice   or   snow.   When   reverse   gear   is  
e

ngaged,   an   audible   signal   (long   beep)  
i

ndicates   that   the   sensors   may   be   dirty.
Certain
  sound   sources   (motorcycle,  
l

orry,   pneumatic   drill,   etc.)   may   trigger  
t

he   audible   signals   of   the   parking  
s

ensor   system.
The
  function   will   be   deactivated  
a

utomatically   if   a   trailer   is   being   towed  
o

r   a   bicycle   carrier   is   fitted   (vehicle  
f

itted   with   a   towbar   or   bicycle   carrier  
r

ecommended   by   CITROËN).
*
  Depending   on   version.
deactivation / Activation of
the front and rear parking
sensors
You can activate or deactivate the function using   the   vehicle's   configuration   or   settings  
m

enu.
The
  status   of   the   system   is   memorised   when  
s

witching   off   the   ignition.
driving

139
Model without AUTO lighting
Model with AUTO lighting
Manual controls
The lighting is controlled directly by the driver by   means   of   the   ring   A   and   the   stalk   B.
Automatic
  illumination   of   headlamps.
B.
 S

talk   for   switching   the   headlamp   beam:  
p

ull   the   stalk   to   switch   between   dipped   and  
m

ain   beam   headlamps.
In
  the   lamps   off   and   sidelamps   modes,  
t

he   driver   can   switch   on   the   main   beam  
h

eadlamps   temporarily   ("headlamp   flash")   by  
m

aintaining   a   pull   on   the   stalk.
A.
 M

ain   lighting   mode   selection   ring:   turn   it  
t

o   position   the   symbol   required   facing   the  
ma

rk.
Lighting off (ignition off) /
D aytime   running   lamps   (engine   running).
Sidelamps only.
Dipped   headlamps   or   main   beam  
h

eadlamps.
displays
Lighting of the corresponding indicator lamp on the   instrument   panel   confirms   the   switching   on  
o

f   the   lighting   selected.
The
  instrument   panel   has   permanent   back-
lighting.
  Illumination   of   the   instrument   panel   is  
t

herefore   not   linked   to   the   exterior   lighting.
Visibility