2016 Citroen DS3 RHD change time

11 3
The gear change requests are only carried out if   the   engine   speed   permits.
It is not necessary to release the accelerator
pedal
  during   gear   changes.
When
  braking   or   slowing   down,   the   gearbox  
c

hanges   down   automatically   so   that   the   vehicle  
p

icks   up   in   the   right   gear.
Under
  full   acceleration,   the   change   up   will   not  
t

ake   place   unless   the   driver   operates   the   gear  
s

elector   or   steering   mounted   control   paddle  
(

unless   the   engine   is   close   to   its   maximum  
s

peed).
Reverse
To engage reverse, the vehicle must be immobilised   with   your   foot   on   the   brake.
F

Sel
ect position R .
Stopping the vehicle
Before switching off the engine:
-  c hange   to   position  n to be in neutral,


or
-
 
l
eave   the   vehicle   in   gear;   in   this   case   the  
v

ehicle   cannot   be   moved.
Manual mode
F Select position M.
The   gears   engaged   appear   in  
s

uccession   in   the   instrument   panel.
You
  can   change   mode   at   any   time   by  
m

oving   the   gear   selector   from   A to M or
the
  other   way   round.
Never
  select   neutral   (position  n
)
  when  
m

oving. There
  is   an   audible   signal   on  
enga

gement
 o
f
 r
everse.For
  all   parking   situations,   you   must
apply the parking brake
 

to   immobilise  
t

he   vehicle.
When
  immobilising   the   vehicle   with   the  
e

ngine   running,   you   must   put   the   gear  
s

elector   into   the   neutral   (position  n
).
B

efore   doing   anything   under   the  
b

onnet,   ensure   that   the   gear   selector  
i

s   in   neutral   (position  n
)
  and   that   the  
p

arking   brake   is   applied.
At
  low   speed,   if   reverse   gear   is   requested,  
t

he n  warning   lamp   flashes   and   the   gearbox  
g

oes   into   neutral   automatically.
To
  engage   reverse,   put   the   gear   selector   into  
p

osition n
, t
hen to position R.
driving

11 7
Automatic operation
F Select position d for automatic c hanging o
f   the   four   gears.
The
  gearbox   then   operates   in   auto-adaptive  
m

ode,   without   any   intervention   on   the   part  
o

f   the   driver.   It   continuously   selects   the   most  
s

uitable   gear   according   to   the   style   of   driving,  
t

he   profile   of   the   road   and   the   load   in   the  
v

ehicle.
For
  maximum   acceleration   without   touching  
t

he   selector,   press   the   accelerator   pedal   down  
f

ully   (kick   down).   The   gearbox   changes   down  
a

utomatically   or   maintains   the   gear   selected  
u

ntil   the   maximum   engine   speed   is   reached.
On
  braking,   the   gearbox   changes   down  
a

utomatically   to   provide   efficient   engine  
b

raking.
If you release the accelerator sharply, the
gearbox
  will   not   change   to   a   higher   gear   for  
s

afety   reasons.
Never select position
n while the
vehicle
  is   moving.
Never select positions P or R unless
the
  vehicle   is   completely   stationary.
Sport and snow programmes
These two special programmes supplement the automatic   operation   in   very   specific   conditions  
o

f   use.
Sport programme "S"
F Press button "S" ,   after   starting   the   engine.
The   gearbox   automatically   favours   a   dynamic  
s

tyle   of   driving.
S
  appears   in   the   instrument   panel.
Snow programme "T"
F Press button " T",   after   starting   the   engine.
The   gearbox   adapts   to   driving   on   slippery  
r

oads.
This
  programme   improves   starting   and   drive  
w

hen   traction   is   poor.
T
  appears   in   the   instrument   panel.
Return to standard
automatic operation
F At  any   time,   press   the   button   selected  a
gain   to   quit   the   programme   engaged   and  
r

eturn   to   auto-adaptive   mode.
driving

There is a risk of damage to the gearbox:
-  i f   you   press   the   accelerator   and  
b

rake   pedals   at   the   same   time,
-
 
i
f   you   force   the   movement   of   the  
s

elector   from   the   P position to
another position when the battery
is
  flat.
To
  reduce   fuel   consumption   when   at  
a

  prolonged   standstill   with   the   engine  
r

unning   (traffic   jam...),   put   the   selector  
i

n the n  position   and   apply   the   parking  
b

rake.
If the selector is not in position P
,
when
 
the
 
driver's
 
door
 
is
 
opened
 
or
 
a

pproximately
 
45
 
seconds
 
after
 
the
 
i

gnition
 
is
 
switched
 
off,
 
a
 
warning
 
m

essage
 
appears
 
in
 
the
 
screen.
F

R

eturn the selector to position P ;
 
t

he
 
message
 
disappears.
When
 
driving
 
on
 
flooded
 
roads
 
or
 
when
 
c

rossing
 
a
 
ford,
 
proceed
 
at
 
walking
 
p

ace.
Operating fault
Manual operation
When the ignition is on, the lighting o
f   this   warning   lamp,   accompanied  
b

y
 
an
 
audible   signal   and   a   message   in   the  
m

ultifunction   screen,   indicates   a   gearbox   fault.
In
 
this
 
case,   the   gearbox   switches   to   back-up  
m

ode
 
and
 
is   locked   in   3rd   gear.   You   may   feel  
a

 
substantial   knock   when   changing   from   P
to R
 
and
 
from  n to R .
  This   will   not   cause   any  
d

amage
 
to
 
the   gearbox.
Do
 
not
 
exceed   60   mph   (100   km/h),   local   speed  
r

estrictions
 p
ermitting.
Contact
 
a
 
CITROËN   dealer   or   a   qualified  
w

orkshop
 
as   soon   as   possible.
F
Sel
ect position M for sequential c
hanging o
f
 
the
 
four
 
gears.
F
 
P

ush
 
the
 
selector
 
towards
 
the
 
+
 
sign
 
to
 
c

hange
 
up
 
a
 
gear.
F
 
P

ull
 
the
 
selector
 
towards
 
the
 
-
 
sign
 
to
 
c

hange
 
down
 
a
 
gear.
It
 
is
 
only
 
possible
 
to
 
change
 
from
 
one
 
gear
 
to
 
a

nother
 
if
 
the
 
vehicle
 
speed
 
and
 
engine
 
speed
 
p

ermit;
 
other wise,
 
the
 
gearbox
 
will
 
operate
 
t

emporarily
 
in
 
automatic
 
mode. This
 
symbol
 
is
 
displayed
 
if
 
a
 
gear
 
i

s
 
not
 
engaged
 
correctly
 
(selector
 
b

etween
 
two
 
positions).
d

 
disappears
 
and
 
the
 
gears
 
e

ngaged
 
appear
 
in
 
succession
 
in
 
the
 
in

strument
 pan

el.
Stopping the vehicle
Before switching off the engine, you can engage p osition P or
n 
to   place   the   gearbox   in   neutral.
In
  both   cases,   apply   the   parking   brake   to  
i

mmobilise   the   vehicle.
Invalid value during manual
operation
If the engine speed is too low or too high, the gear   selected   flashes   for   a   few   seconds,   then  
t

he   actual   gear   engaged   is   displayed.
It
  is   possible   to   change   from   position  d
(automatic)
  to   position   M   (manual)   at   any   time.
When
  the   vehicle   is   stationary   or   moving  
v

ery   slowly,   the   gearbox   selects   gear   M1
automatically.
The
  sport   and   snow   programmes   do   not  
o

perate   in   manual   mode.

To reduce fuel consumption when at a  prolonged   standstill   with   the   engine  
r

unning   (traffic   jam...),   put   the   selector  
i

n the n  position   and   apply   the   parking  
b

rake.
If the selector is not in position P
,
when
 
the
 
driver's
 
door
 
is
 
opened
 
or
 
a

pproximately
 
45
 
seconds
 
after
 
the
 
i

gnition
 
is
 
switched
 
off,
 
a
 
warning
 
m

essage
 
appears
 
in
 
the
 
screen.
F
R
eturn the selector to position P
;
 t
he
 
message
 
disappears.
When
 
driving
 
on
 
flooded
 
roads
 
or
 
when
 
c

rossing
 
a
 
ford,
 
proceed
 
at
 
walking
 
p

ace. There
  is   a   risk   of   damage   to   the   gearbox:
-  
i
f   you   press   the   accelerator   and  
b

rake   pedals   at   the   same   time,
-  
i
f   you   force   the   movement   of   the  
s

elector   from   the   P position to
another position when the battery
is   flat.
F

Sel

ect position M for sequential
 c

hanging
 o

f
 
the
 
six
 
gears.
F
 
M

ove
 
the
 
selector
 
towards
 
the
 
+
 
sign
 
to
 
c

hange
 
up
 
a
 
gear.
F
 
M

ove
 
the
 
selector
 
towards
 
the
 
-
 
sign
 
to
 
c

hange
 
down
 
a
 
gear.
It
 
is
 
only
 
possible
 
to
 
change
 
from
 
one
 
gear
 
to
 
a

nother
 
if
 
the
 
vehicle
 
speed
 
and
 
engine
 
speed
 
p

ermit;
 
other wise,
 
the
 
gearbox
 
will
 
operate
 
t

emporarily
 
in
 
automatic
 
mode.
Manual operation
d disappears and the gears e
ngaged   appear   in   succession   in   the  
in

strument
 pan
el.
If
 
the
 
engine   speed   is   too   low   or   too   high,   the  
g

ear
 
selected   flashes   for   a   few   seconds,   then  
t

he
 
actual
  gear   engaged   is   displayed.
It
 
is
 
possible   to   change   from   position  d
(automatic)
  to   position   M   (manual)   at   any   time.
When
 
the
  vehicle   is   stationary   or   moving  
v

ery
 
slowly,   the   gearbox   engages   first   gear  
au

tomatically.
Invalid value during manual
operation
This symbol is displayed if a gear i s   not   engaged   correctly   (selector  
b

etween   two   positions).
Stopping the vehicle
Before switching off the engine, you can engage   position   P or n  to   place   the   gearbox   in  
neu

tral.
In
  both   cases,   apply   the   parking   brake   to  
i

mmobilise   the   vehicle. When
  the   ignition   is   on,   the   lighting  
o

f   this   warning   lamp,   accompanied  
Operating fault
by an audible signal and a message in the m
ultifunction   screen,   indicates   a   gearbox   fault.
In
  this   case,   the   gearbox   switches   to   back-up  
m

ode   and   is   locked   in   3rd   gear.   You   may   feel  
a

  substantial   knock   when   changing   from   P
to R
  and   from  n to R.
  This   will   not   cause   any  
d

amage   to   the   gearbox.
Do
  not   exceed   60   mph   (100   km/h),   local   speed  
r

estrictions
 p
ermitting.
Contact
  a   CITROËN   dealer   or   a   qualified  
w

orkshop   as   soon   as   possible.

Stop & Start requires a 12 V battery with   a   special   specification   and  
t

echnology.
All
  work   on   this   type   of   battery   must  
o

nly   be   done   by   a   CITROËN   dealer   or  
a

  qualified   workshop.
For
  more   information   on   the   12   V  
b

attery,   please   see   the   corresponding  
s

ection.
Operating fault
In the event of a fault with the system, the "ECO OFF"   switch   warning   lamp   flashes   for   a  
f

ew   moments   then   comes   on   continuously.
Have
  it   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
In
  the   event   of   a   fault   in   STOP   mode,   the  
v

ehicle   may   stall.   All   of   the   instrument   panel  
w

arning   lamps   come   on.   It   is   then   necessary  
t

o   switch   off   the   ignition   and   start   the   engine  
a

gain   using   the   key.
Press
 
this
 
switch
 
to
 
deactivate
 
the
 
system.
The
 
deactivation
 
is
 
confirmed
 
by
 
the
 
switch
 
w

arning
 
lamp
 
coming
 
on
 
accompanied
 
by
 
a
 
m

essage.
Pressing
 
this
 
switch
 
again
 
reactivates
 
the
 
f

unction.
The
 
switch
 
warning
 
lamp
 
goes
 
off,
 
a

ccompanied
 
by
 
a
 
message.
In
 
certain
 
circumstances,
 
such
 
as
 
maintaining
 a
 
comfortable
 
temperature
 
in
 
the
 
passenger
 
c

ompartment,
 
it
 
may
 
be
 
useful
 
to
 
deactivate
 
S

top
 
&
 
Start.
You
 
can
 
request
 
deactivation
 
at
 
any
 
time,
 
once
 
t

he
 
ignition
 
is
 
switched
 
on.
If
 
the
 
engine
 
is
 
in
 
STOP
 
mode,
 
it
 
restarts
 
i

mmediately.
Stop
 
&
 
Start
 
reactivates
 
automatically
 
each
 
t

ime
 
the
 
ignition
 
is
 
switched
 
on.
deactivation / Manual
reactivation
Opening the bonnet
dr

iving on flooded roads
Before
  driving   through   a   flooded   road,  
i

t   is   strongly   recommended   that   you  
d

eactivate   the   Stop   &   Start   system.
For
  more   advice   on   driving,  
p

articularly   on   flooded   roads,   refer   to  
t

he   corresponding   section.
Before
  doing   anything   under   the   bonnet,
 d

eactivate   the   Stop   &   Start   system   to
 a

void   the   risk   of   injury   related   to   an
 a

utomatic   change   to   START   mode.

Under-inflation detection
System which automatically checks the pressures of the tyres while driving.
T he   under-inflation   detection   system  
d

oes   not   replace   the   need   for   vigilance  
o

n   the   part   of   the   driver.
This
  system   does   not   avoid   the   need   to  
c

heck   the   tyre   pressures   (including   the  
s

pare   wheel)   every   month   as   well   as  
b

efore   a   long   journey.
Driving
  with   under-inflated   tyres  
i

mpairs   road   holding,   extends   braking  
d

istances   and   causes   premature  
t

yre   wear,   particularly   under   arduous  
c

ondition   (high   loading,   high   speed,  
lon

g
 jo
urney).The
  inflation   pressures   defined   for  
y

our   vehicle   can   be   found   on   the   tyre  
p

ressure   label.
For
  more   information   on   the  
i

dentification   markings,   refer   to   the  
c

orresponding
 s
ection.
Tyre
  pressures   should   be   checked  
w

hen   the   tyres   are   "cold"   (vehicle  
s

topped   for   1   hour   or   after   a   journey   of  
l

ess   than   6   miles   (10   km)   at   moderate  
s

peeds).
Other wise
  (when   hot),   add   0.3   bar   to  
t

he   pressures   shown   on   the   label.
Driving
  with   under-inflated   tyres  
i

ncreases   fuel   consumption.
The
  system   monitors   the   pressures   in   the   four  
t

yres,   once   the   vehicle   is   moving.
It
  compares   the   information   given   by   the   four  
w

heel   speed   sensors   with   reference values,
which must be reinitialised ever y time the
tyre pressures are adjusted or a wheel
changed .
The
  system   triggers   an   alert   as   soon   as   it  
d

etects   a   drop   in   the   inflation   pressure   of   one  
o

r   more   tyres.

Changing main beam headlamp bulbsChanging sidelamp bulbs
F Remove  the   protective   cover   by   pulling  t
he tab.
F
 
D
isconnect   the   bulb   connector.
F
 
S
pread   the   springs   to   release   the   bulb.
F
 
R
emove   the   bulb   and   change   it.
To refit, carry out these operations in reverse
o r d e r. F
 R emove   the   protective   cover   by   pulling  t
he tab.
F
 
P
ull   the   bulb   holder   pressing   on   the   tabs   on  
bo

th
 s
ides.
F
 
P
ull   the   bulb   and   change   it.
To refit, carry out these operations in reverse
o r d e r.
LEd* / Xenon front lamps
* LED: light-emitting diode.
1.
 D
irection   indicators   (LEDs).
2.
 S
idelamps
 (
LEDs).
3.
 D
ipped   beam   headlamps   (Xenon).
4.
 M
ain   beam   headlamps   (LEDs   /   Xenon).
5.
 D
aytime   running   lamps   (LEDs).
6.
 F
ront   foglamps   (LEDs).
For   the   replacement   of   this   type   of   lamp  
(

LED /   Xenon),   contact   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.

Checks
12 V batteryAir filter and passenger compartment filter
Oil filterParticle filter (
di
esel)
Unless other wise indicated, check these components in accordance with the manufacturer's service schedule and according to your engine.
O ther wise,   have   them   checked   by   a   CITROËN   dealer   or   a   qualified   workshop.
The battery does not require any maintenance.However, check regularly that the terminals   are   correctly   tightened   and  
t

hat   the   connections   are   clean. Refer
  to   the   manufacturer's  s
ervice   schedule   for   details   of   the  r
eplacement   intervals   for   these  
c

omponents.
Replace
  the   oil   filter   each   time   the  
e

ngine   oil   is   changed.
Refer
  to   the   manufacturer's  
s

ervice   schedule   for   details   of  
t

he   replacement   interval   for   this  
c

omponent.
Versions
  equipped   with   Stop   &   Start
 a

re   fitted   with   a   12   V   lead-acid  
b

attery   of   specific   technology   and  
s

pecification.
Its
  replacement   should   be   carried  
o

ut   only   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop. The start of saturation of the
particle
  filter   is   indicated   by   the  
O

n a new vehicle, the first particle
filter
  regeneration   operations   may   be  
a

ccompanied   by   a   "burning"   smell,  
w

hich   is   per fectly   normal.
Following
  prolonged   operation   of   the  
v

ehicle   at   very   low   speed   or   at   idle,  
y

ou   may,   in   exceptional   circumstances,  
n

otice   the   emission   of   water   vapour   at  
t

he   exhaust   on   acceleration.   This   does  
n

ot affect the behaviour of the vehicle
or
  the   environment.
When
 
carrying   out   any   operation   on   the   12   V  
b

attery,
 
refer   to   the   corresponding   section   for  
d

etails
 
of
 
the   precautions   to   be   taken   before  
s

tarting
 
work. Depending
  on   the   environment   (e.g.   dusty  
a

tmosphere)   and   the   use   of   the   vehicle   (e.g.  
c

ity   driving),   replace them twice as often if
necessary .
A
  clogged   passenger   compartment   filter   may  
h

ave   an   adverse   effect   on   the   per formance  
o

f   the   air   conditioning   system   and   generate  
u

ndesirable
 o
dours.temporary
  illumination   of   this   warning   lamp  
a

ccompanied   by   a   message   in   the   multifunction  
sc

reen.
As
  soon   as   the   traffic   conditions   permit,  
r

egenerate   the   filter   by   driving   at   a   speed   of   at  
l

east   40   mph   (60   km/h)   until   the   warning   lamp  
g

oes   off.
If
  the   warning   lamp   stays   on,   this   indicates   a  
l

ow   additive   level.
For
  more   information   on   checking   levels,   refer  
t

o   the   corresponding   section.