2016 CITROEN DS3 CABRIO display

Menus
navigation
Navigation  is   available   depending   on  
t

he   county   and/or   trim   level.
Refer
  to   the   "Audio   and   telematics"  
s

ection.
Radio Media
Refer
  tothe   "Audio   and   telematics"  
s

ection.
Settings
Allows
  configuration   of   the   display  
a

nd   the   system.
Refer
  to   the   corresponding   section.
Internet
These
  services   are   available   depending
 o

n   the   county   and/or   trim   level.
Refer
  to   the   "Audio   and   telematics"  
s

ection. Telephone
Refer
  to   the   "Audio   and   telematics"  
s

ection.
dr

iving
Allows
 

access
 
to
 
the
 
trip
 
computer
 
and,
 d

epending   on   version,   the   adjustment
 o

f   settings   for   certain   functions.
Refer
  to   the   corresponding   section.1.
 V

olume   /   mute.
Refer
  to   the   "Audio   and   telematics"   section.
Press this button, then select the
desired
 m

enu.

51
"driving" menu
ButtonCorresponding function Comments
di

agnostic Recap
  of   current   alerts.
Under-inflation initialisation Reinitialisation
  of   tyre   pressures.
Refer
  to   the   "Safety"   section.
Vehicle settings Access
  to   other   functions   with   settings   that   can   be   adjusted.   The   functions   are   grouped  
t

ogether   under   three   tabs:
-
 
"
[
dr
iving assistance]"
-
 
"
Automatic   rear   wiper   in   reverse"   (Activation   of   rear   wiper   coupled   to   reverse   gear:   see  
t

he   " Visibility"   section)
-
 
"
Parking   sensors"   (Activation   of   rear   parking   sensors   ;   refer   to   the   "Driving"   section).
-
 
"
Automatic   emergency   braking"   (Active   City   Brake   ;   refer   to   the   "Safety"   section).
-
 
"
[Lighting ]"
-
 
"
Mood   lighting"   (refer   to   the   " Visibility"   section).
-
 
"
[Guide-me-home   lighting]"   (Automatic   guide   me   home   lighting   ;   refer   to   the   " Visibility"  
s

ection).
Select
  or   deselect   the   tabs   at   the   bottom   of   the   screen   to   display   the   functions   required.
The
  functions   accessible   in   this   menu   are   given   in   the   table   below.
Monitoring

"Settings" menu
The functions accessible in this menu are given in the table below.
Bu tton Corresponding function Comments
Audio settings Adjustment
  of   volume,   balance...
Turn off screen Turns
  off   the   display   in   the   the   touch   screen   tablet   (black   screen).
Pressing
  the   black   screen   (or   the   ME
n
U
 
button)   restores   the   display.
System Settings Choice
  of   units:
-
 
t
emperature   (°Celsius   or   °Fahrenheit)
-
 
d
istance   and   fuel   consumption   (l/100   km,   mpg   or   km/l).
Time/
d
a
te Setting
  the   date   and   time.
Languages Choice
  of   language   used   from   a   defined   list.
Screen settings Adjustment
  of   the   display   settings   (scrolling   of   text,   animations...)   and   the   screen   brightness.
Calculator Display
  the   calculator.
Calendar Display
  the   calendar.

Trip computer
Monochrome screen A
Information displays
F Press  the   button,   located   at   the   end   of   the  w
iper stalk ,
  to   display   the   various   items   of  
t

rip   computer   information   in   succession.The
  trip   computer   provides   the   following  
i

nformation:
-
 ra
nge,
-  
c
urrent   fuel   consumption,
-  
S
top   &   Start   time   counter,
-  d istance   travelled,
-  
a
verage   fuel   consumption,-
 a

verage
 s
peed.
F  
T
he   next   press   then   returns   you   to   the  
n

ormal
 d
isplay.
System   that   gives   you   information   on   the   current   journey   (range,   fuel   consumption…).
Trip reset
F Press
  the   control   for   more   than   two  s
econds   to   reset   to   zero   the   distance  
t

ravelled,   the   average   fuel   consumption  
a

nd   the   average   speed.

55
Monochrome screen C
Information displays
F Press  the   button,   located   at   the   end   of  t
he wiper stalk ,
  to   display   the   various   trip  
c

omputer   tabs   in   succession: -
 
t
he   current   information   tab  
w

ith:
●  
t
he   range,
●  
t
he   current   fuel  
c

onsumption,
●  
t
he   distance   remaining  
to   be   travelled   or   the  
Stop   &   Start   time   counter.
-  
t
he   trip   "1"
 
tab   with:
●  
t
he   distance   travelled,
●  
t
he   average   fuel  
c

onsumption,
●  t he   average   speed, f
or   the   first   trip.
-
 
t
he   trip   "2"
 
tab   with:
●
 
t
he   distance   travelled,
●
 
t
he   average   fuel  
c

onsumption,
●
 
t
he   average   speed,
 f

or   the   second   trip.
F
 
P
ressing   the   button   again   returns   you   to  
t

he   normal   display.
Trip reset
F When  the   trip   required   is   displayed,   press  t
he   button   on   the   end   of   the   wiper   stalk   for  
m

ore   than   two   seconds.
Tr i p s "1"
 

and   "2"
 
are   independent   but   their   use  
i

s   identical.
For
  example,   trip   "1"
 
can   be   used   for   daily  
f

igures,   and   trip   "2"
 
for   monthly   figures.
Monitoring

Touch screen tablet
Information display
F Press the MEnU button, then select
"dr iving",
  to   display   the   various   tabs.
F
 
S
elect   the   desired   tab   using   your   finger.-
 
T
he   "
Instantaneous "   tab   with:
●  
t
he   range,
●  
t
he   current   fuel   consumption,
●  
t
he   Stop   &   Start   time   counter.
-  
T
he   "
Tr i p 1 "   tab   with:
●  
t
he   distance   travelled,
●  
t
he   average   fuel   consumption,
●  
t
he   average   speed,  
 
f
or   the   first   trip.
-  
T
he   "Tr i p 2 "
  tab   with:
●
 
t
he   distance   travelled.
●
 
t
he   average   fuel   consumption,
●
 
t
he   average   speed,  
 
f

or   the   second   trip.
Trip reset
F When  the   desired   trip   is   displayed,   press  t
he   reset   button.
Tr i p s "1"
 

and   "2"
 
are   independent   but   their   use  
i

s   identical.
For
  example,   trip   "1"
 
can   be   used   for   daily  
f

igures,   and   trip   "2"
 
for   monthly   figures.

57
Trip computer, a few definitions
Range
(miles or km)
Current fuel consumption
(mpg or l/100 km or km/l)
Stop & Start time
counter
(minutes / seconds or hours / minutes)
This
 
value
 
may
 
vary
 
following
 
a
 
change
 
i

n
 
the
 
style
 
of
 
driving
 
or
 
the
 
relief,
 
r

esulting
 
in
 
a
 
significant
 
change
 
in
 
the
 
c

urrent
 
fuel
 
consumption.
If
 
dashes
 
are
 
displayed
 
continuously
 
w

hile
 
driving
 
in
 
place
 
of
 
the
 
digits,
 
c

ontact
 
a
 
CITROËN
 
dealer
 
or
 
a
 
q

ualified
 w

orkshop.
When
 
the
 
range
 
falls
 
below
 
20
 
miles
 
(30
 
km),
 
d

ashes
 
are
 
displayed.
 
After
 
filling
 
with
 
at
 
least
 
5

 
litres
 
of
 
fuel,
 
the
 
range
 
is
 
recalculated
 
and
 
is
 
d

isplayed
 
when
 
it
 
exceeds
 
60
 
miles
 
(100
 
km).
distance remaining to
destination
(miles or km)
T
he
 
distance
 
which
 
can
 
still
 
be
 
travelled
 
with
 
t

he
 
fuel
 
remaining
 
in
 
the
 
tank
 
(related
 
to
 
the
 
a

verage
 
fuel
 
consumption
 
over
 
the
 
last
 
few
 
m

iles
 (

kilometres)
 t

ravelled). Calculated
 
over
 
the
 
last
 
few
 
seconds.
This
 
is
 
the   distance   remaining   to   be   travelled  
t

o
 
the
 
final   destination.   It   can   be   entered   by  
t

he user.
If
 
the
 
distance   is   not   entered,   dashes   are  
d

isplayed
  in   place   of   the   digits.
If
 
your
 
vehicle   is   fitted   with   Stop   &   Start,   a   time  
c

ounter
 
calculates   the   time   spent   in   STOP  
m

ode
 
during   a   journey.  
I

t
 
resets
 
to   zero   every   time   the   ignition   is  
s

witched
 
on   with   the   key.
distance travelled
(miles or km)
C
alculated
 
since   the   last   trip   computer   reset.
Average speed
(mph or km/h)
C
alculated   since   the   last   trip   computer   reset.
Average fuel
consumption
(mpg or l/100 km or km/l)
C
alculated
 
since   the   last   trip   computer   reset.
This
 
function   is   only   displayed   from  
2

0 mph
  (30   km/h).
Monitoring

Digital air conditioningThe air conditioning operates when the engine is running, as well as in STOP mode with Stop & Start.
Automatic operation
1. Automatic "comfort" programme
Press the "AUTO"  button.  T
he "AUTO"  symbol   is   displayed. For
  your   comfort,   when   the   engine   is  
s

witched   off,   the   settings   are   retained  
u

ntil   the   engine   is   switched   on   again.
To   prevent   too   great   a   distribution   of  
c

old   air   when   the   engine   is   cold,   the   air  
f

low   will   only   reach   its   optimum   level  
g

radually.
2. Temperature adjustment
The value indicated on the display corresponds t
o   a   level   of   comfort   and   not   to   a   temperature   in  
d

egrees   Celsius   or   Fahrenheit. On
  entering   the   vehicle,   if   the   interior  
i

s   very   cold   or   hot,   there   is   no   need   to  
c

hange   the   value   displayed   in   order  
t

o   reach   the   required   level   of   comfort.  
T

he   system   corrects   the   temperature  
d

ifference   automatically   and   as   quickly  
a

s   possible.
Press the " 5"
  and   "6 " buttons to
change
  this   value.   A   setting   around  
t

he value 21
 
enables   optimum  
c

omfort   to   be   obtained.   However,  
d

epending   on   your   requirements,   a  
s

etting   between   18   and   24   is   usual.
3. Automatic "visibility" programme
The automatic comfort programme may n
ot   be   sufficient   for   rapid   demisting   or d

efrosting   of   the   windscreen   and   side
 w

indows
 (
humidity,
 se
veral
 p
assengers,
 i

ce,   etc.).
With
  Stop   &   Start,   when   demisting   has  
b

een   activated,   the   STOP   mode   is   not  
a

vailable.
In
 
this
 
case,   select   the   automatic   visibility  
p

rogramme.   The   indicator   lamp   in   the   button   3
comes
 
on.
The
 
system   automatically   controls   the   air  
c

onditioning   and   the   flow   of   air   and   provides  
o

ptimum
 
air   distribution   to   the   windscreen   and  
s

ide
 
windows.   It   deactivates   air   recirculation   5.
To
 
exit
 
this   programme,   press   button   3   again   or  
"A

UTO" ,
 
the   indicator   lamp   in   the   button   goes  
o

ff
 
and
 
"AUTO"
 
is   displayed.
We
 
recommend
 
that
 
you
 
use
 
this
 
mode.
 
I

t
 
provides
 
optimised
 
automatic
 
control
 
of
 
a

ll
 
of
 
the
 
following
 
functions:
 
passenger
 
c

ompartment
 
temperature,
 
air
 
flow,
 
air
 
d

istribution
 
and
 
air
 
intake,
 
in
 
accordance
 
with
 
t

he
 
comfort
 
value
 
that
 
you
 
have
 
chosen.
This
 
system
 
is
 
designed
 
to
 
operate
 
effectively
 
i

n
 
all
 
seasons,
 
with
 
the
 
windows
 
closed.