2016 CITROEN DS3 CABRIO boot

71
System which provides full manual locking or unlocking   of   the   doors   from   the   inside.
Central locking
Manual central locking
Unlocking
F Press button A  again   to   unlock   the   vehicle.
The   red   indicator   lamp   on   the   button  
s

witches off.
If
 
one
 
of
 
the
 
doors
 
is
 
open,
 
central
 
l

ocking
 
from
 
the
 
inside
 
does
 
not
 
take
 
p

lace. If
  the   vehicle   is   locked   from   the   outside,  
t

he   red   indicator   lamp   flashes   and  
b

utton A   is   inactive.
F
 
I
n   this   case,   use   the   remote   control  
o

r   the   key   to   unlock   the   vehicle.
Automatic central locking
System which provides full automatic locking or   unlocking   of   the   doors   and   the   boot   while  
d

riving.
You
  can   activate   or   deactivate   this   function.
Locking
When the speed exceeds 6 mph (10 km/h), the doors   and   the   boot   lock   automatically.
Unlocking
F Above  6   mph   (10   km/h),   press   button   A to
unlock   the   doors   and   the   boot   temporarily.
If
  one   of   the   doors   is   open,   the  
a

utomatic   central   locking   does   not   take  
p

lace.
If   the   boot   is   open,   the   automatic  
c

entral   locking   of   the   doors   is   active.
Locking
F Press button A
  to   lock   the   vehicle.
The   red   indicator   lamp   on   the   button   comes   on.
Access

Activation
F Press button A  for   more   than   two   seconds.
A   confirmation   message   appears   in   the  
m

ultifunction   screen,   accompanied   by   an  
a

udible
 s
ignal.
deactivation
F Press button A   again   for   more   than  
two   seconds.
A
  confirmation   message   appears   in   the  
m

ultifunction   screen,   accompanied   by   an  
a

udible
 s
ignal. To
  lock   or   unlock   the   doors   mechanically   in   the  
e

vent   of   a   central   locking   system   failure   or   flat  
b

attery.
Emergency control
Locking the driver's door
F Insert
  the   key   in   the   lock,   then   turn   it   to   the  l
eft.
Unlocking the driver's door
F Insert   the   key   in   the   lock,   then   turn   it   to   the  r
ight.
Locking the passenger's door
F Remove   the   black   cap,   on   the   edge   of   the  d
oor,   using   the   key.
F
 
I
nsert   the   key   in   the   cavity,   then   turn   it   fully.
F
 
R
emove   the   key   and   refit   the   cap.
Unlocking the passenger's door
F Pull  the   interior   door   opening   control.
In the event of a fault with the central
locking
 
system,
 
you
 
must
 
disconnect
 
t

he
 
battery
 
to
 
lock
 
the
 
boot
 
and
 
so
 
e

nsure
 
the
 
complete
 
locking
 
of
 
the
 
v

ehicle.

73
Boot
Opening
F After  unlocking   the   vehicle,   press   the  o
pening   control   and   raise   the   tailgate.
Closing
F Lower  the   tailgate   using   the   interior   grab  han
dle.
If
  the   tailgate   is   not   closed   correctly:
-
 
w
hen the engine is running ,
this
  warning   lamp   comes   on,  
a

ccompanied   by   a   message   in  
t

he   multifunction   screen   for   a   few  
se

conds,
-
 
w
hen the vehicle is moving   (speed   above  
6

  mph   (10   km/h)),   this   warning   lamp   comes  
o

n,   accompanied   by   an   audible   signal   and  
a

  message   in   the   multifunction   screen   for   a  
f

ew   seconds. System
  for   mechanical   unlocking   of   the   boot  
i

n   the   event   of   a   battery   or   central   locking  
m

alfunction.
Tailgate release
Unlocking
F Fold  back   the   rear   benchseat   to   gain  a
ccess   to   the   lock   from   inside   the   boot.
F
 
I
nsert   a   small   screwdriver   into   hole   A of the
lock
  to   unlock   the   tailgate.
Access

81
Rear seatsBench seat with fixed one-piece cushion and 1/3 - 2/3 split folding backrest to vary the load space in the boot.
F  
M
ove   the   corresponding   front   seat   for ward  
i

f   necessary.
F
 
C
heck   that   the   seat   belt   is   positioned  
c

orrectly   on   the   side   of   the   seat   backrest.
F
 
P
lace   the   head   restraints   in   the   low  
p

osition.
Folding the backrest
F Pull control 1   for wards   to   release   the   seat  b
ackrest 2.
F
 
F
old   the   seat   backrest   2   on   to   the   cushion.F
 
S
traighten   the   seat   backrest   2
 
and   secure   it.
F  
C
heck  
t
hat  
t
he  
r
ed  
i
ndicator,  
l
ocated  
n
ext  
t
o  
t

he control 1
,   is   no   longer   visible.
Repositioning the seat backrest
When repositioning the seat backrest, t
ake   care   not   to   trap   the   seat   belts.
Comfort

Recommendations for ventilation and air conditioning
If after an extended stop in sunshine, the   interior   temperature   is   very  
h

igh,   first   ventilate   the   passenger  
c

ompartment   for   a   few   moments.
Put
  the   air   flow   control   at   a   setting   high  
e

nough   to   quickly   change   the   air   in   the  
p

assenger
 c
ompartment.
The
  air   conditioning   system   does   not  
c

ontain   chlorine   and   does   not   present  
a

ny   danger   to   the   ozone   layer.
In
 
order
 
for
 
these
 
systems
 
to
 
be
 
fully
 
effective,
 
follow
 
the
 
operation
 
and
 
maintenance
 g
uidelines belo
w:
F
 
T

o
 
obtain
 
an
 
even
 
air
 
distribution,
 
take
 
care
 
not
 
to
 
obstruct
 
the
 
exterior
 
air
 
intake
 
grilles
 
l

ocated
 
at
 
the
 
base
 
of
 
the
 
windscreen,
 
the
 
nozzles,
 
the
 
vents
 
and
 
the
 
air
 
outlets,
 
as
 
well
 
a

s
 
the
 
air
 
extractor
 
located
 
in
 
the
 
boot.
F
 
D

o
 
not
 
cover
 
the
 
sunshine
 
sensor,
 
located
 
on
 
the
 
dashboard;
 
this
 
is
 
used
 
for
 
regulation
 
o

f
 
the
 
air
 
conditioning
 
system.
F
 
O

perate
 
the
 
air
 
conditioning
 
system
 
for
 
at
 
least
 
5
 
to
 
10
 
minutes,
 
once
 
or
 
twice
 
a
 
month
 
t

o
 
keep
 
it
 
in
 
per fect
 
working
 
order.
F
 
E

nsure
 
that
 
the
 
passenger
 
compartment
 
filter
 
is
 
in
 
good
 
condition
 
and
 
have
 
the
 
filter
 
e

lements
 
replaced
 
regularly.
 W

e
 
recommend
 
the
 
use
 
of
 
a
 
combined
 
passenger
 
compartment
 
filter.
 
Thanks
 
to
 
its
 
s

pecial
 
active
 
additive,
 
it
 
contributes
 
to
 
the
 
purification
 
of
 
the
 
air
 
breathed
 
by
 
the
 
o

ccupants
 
and
 
the
 
cleanliness
 
of
 
the
 
passenger
 
compartment
 
(reduction
 
of
 
allergic
 
s

ymptoms,
 
bad
 
odours
 
and
 
greasy
 
deposits).
F
 
T

o
 
ensure
 
correct
 
operation
 
of
 
the
 
air
 
conditioning
 
system,
 
you
 
are
 
also
 
advised
 
to
 
have
 
i

t
 
checked
 
regularly
 
as
 
recommended
 
in
 
the
 
maintenance
 
and
 
warranty
 
guide.
F
 
I

f
 
the
 
system
 
does
 
not
 
produce
 
cold
 
air,
 
switch
 
it
 
off
 
and
 
contact
 
a
 
CITROËN
 
dealer
 
or
 
a

 
qualified
 
workshop.
When
 
towing
 
the
 
maximum
 
load
 
on
 
a
 
steep
 
gradient
 
in
 
high
 
temperatures,
 
switching
 
off
 
the
 
a

ir
 
conditioning
 
increases
 
the
 
available
 
engine
 
power
 
and
 
so
 
improves
 
the
 
towing
 
ability. The
  condensation   created   by   the   air  
c

onditioning   results   in   a   discharge  
o

f   water   under   the   vehicle   which   is  
p

er fectly   normal.

1. Rear parcel shelf  (
see   the   following   page   for   details)
2.
R

etaining strap
3.
L

ocation for Hi-Fi amplifier
4.
S

towing rings
5.
S

torage box (version equipped with a
temporary puncture repair kit)
 (

see   the   following   page   for   details)


or
T

ool box (version equipped with a spare
wheel)
 (

refer   to   the   "Changing   a   wheel"   section)
Boot fittings

101
To remove the shelf:
F  u nhook   the   two   cords,
F
 
r
aise   the   shelf   slightly,   then   unclip   it   on  
e

ach   side.
Rear parcel shelf
F Raise   the   boot   carpet   by   pulling   the   strap  u
pwards   to   gain   access   to   the   storage   box.
Storage box
F Refit  the   boot   floor   carpet   by   folding   it  s
lightly   in   the   middle.
This
 
has
 
areas
 
for
 
storing
 
a
 
temporary
 
puncture
 
r

epair
 
kit,
 
a
 
box
 
of
 
spare
 
bulbs,
 
a
 
first
 
aid
 
kit,
 
t

wo
 
warning
 
triangles,
 
...
Comfort

139
Travelling abroad
LEd / Xenon front lamps
For motoring in countries that drive on the other s
ide   of   the   road,   it   is   necessary   to   adjust   the  
d

ipped   beams   so   as   to   not   dazzle   the   drivers   of  
a

pproaching
 v
ehicles.
F
 
R
aise   the   bonnet   for   access   to   the   adjuster  
(

one   adjuster   per   headlamp).
F
 
I
nsert   a   suitable   allen   key   (not   supplied)  
i

nto   the   hexagonal   head   of   the   adjuster.
F
 
T
urn   the   allen   key   half   a   turn   clockwise.
Headlamp adjustment
To avoid causing a nuisance to other road u
sers,   the   height   of   the   headlamps   should   be  
a

djusted   in   relation   to   the   load   in   the   vehicle.
0.
 
D
river   only   or   driver   +   front   passenger.
-.
 I

ntermediate
 s
etting.
1.
 5

  people.
-.
 
5
  people   +   load   in   the   boot.
2.
 D

river   only   +   maximum   authorised   load   in  
t

he   boot.
This
  position   is   sufficient   to   avoid   causing  
d

azzle.
Higher
  settings   may   limit   the   spread   of   light  
f

rom   the   headlamps.
The
  initial   setting   is   position   "0". On
  your   return,   don't   forget   to  
a

djust   your   headlamps   back   to   their  
i

nitial   setting,   by   carrying   out   these  
o

perations   in   reverse   order.
Visibility