2016 CITROEN DS3 CABRIO DAG display

189
DS3_en_Chap08_info-pratiques_ed01-2015
Range indicators
Once the AdBlue® tank is on reserve or after d
etection
 
of
 
a
 
fault   with   the   SCR   emissions  
c

ontrol
 
system,
 
when   the   ignition   is   switched  
o

n,
 
an
 
indicator
 
displays   an   estimate   of   the  
d

istance
 
that
 
can
 
be   covered,   the   range,   before  
e

ngine
 
starting
 
is
 
prevented.
In
 
the
 
event
 
of
 
simultaneous   system   fault   and  
l

ow AdBlue
® level, the shortest range figure is t
he
 
one
 
displayed. The
  engine   start   prevention   system  
r

equired   by   regulations   is   activated  
a

utomatically   once   the   AdBlue
® tank i
s
 
empty.
In the event of the risk of non-starting related to a lack of AdBlue®
Range greater than 1 500 miles (2 400 km)
When   the   ignition   is   switched   on,   no  
i

nformation   on   range   is   displayed   automatically  
i

n   the   instrument   panel.
Remaining range between 350 and 1500 miles (600 and 2 400 km)
When switching on the ignition, the UREA warning   lamp   comes   on,   accompanied  
b

y   an   audible   signal   and   the   display   of   a  
m

essage   (e.g.:   "Top   up   emissions   additive:  
S

tarting   prevented   in   900   miles")   indicating  
t

he   remaining   range   expressed   in   miles   or  
k

ilometres.
When
  driving,   the   message   is   displayed   every  
2

00   miles   (300   km)   until   the   additive   tank   has  
be

en
 t
opped-up.
Go
  to   a   CITROËN   dealer   or   a   qualified  
w

orkshop   to   have   the   AdBlue
® tank topped-up.
Y
ou
 
can
 
also
 
top-up
 
the
 
tank
 
yourself.
Refer
 
to
 
the
 
"Topping-up"
 
section.
Practical information

DS3_en_Chap08_info-pratiques_ed01-2015
When switching on the ignition, the SERVICE warning   lamp   comes   on   and   the   UREA   warning  
l

amp   flashes,   accompanied   by   an   audible  
s

ignal   and   the   display   of   a   message   (e.g.   "Top  
u

p   emissions   additive:   Starting   prevented   in  
3

50   miles")   indicating   the   remaining   range  
e

xpressed   in   miles   or   kilometres.
When
  driving,   the   message   is   displayed   every  
3

0   seconds   until   the   additive   tank   has   been  
t

opped-up.
Go
  to   a   CITROËN   dealer   or   a   qualified  
w

orkshop   to   have   the   AdBlue
® tank topped-up.
Y
ou
 
can
 
also
 
top-up
 
the
 
tank
 
yourself.
Refer
 
to
 
the
 
"Topping-up"
 
section.
Other wise you will not be able to restart your
engine.
Remaining range between 0 and 350 miles (0 and 600 km)
When switching on the ignition, the SERVICE w arning   lamp   comes   on   and   the   UREA   warning  
l

amp   flashes,   accompanied   by   an   audible  
s

ignal   and   the   display   of   the   message   "Top   up  
e

missions   additive:   Starting   prevented".
The AdBlue
® tank  is  empty:  t he  s ystem  r equired  b
y
 
regulations   prevents   engine   starting.
Breakdown related to a lack of AdBlue® additive
To be able to start the engine, w
e   recommend   that   you   call   on  
a

  CITROËN   dealer   or   a   qualified  
w

orkshop   for   the   top-up   required.   If  
y

ou carry out the top-up yourself, it is
essential
  to   add   at   least   3.8   litres   of  
Ad

Blue
® to the tank.
R
efer
 
to
  the   "Topping-up"   section.

191
DS3_en_Chap08_info-pratiques_ed01-2015
In the event of a fault with the the SCR emissions control system
If it is a temporary fault, the alert disappears   during   the   next   journey,  
a

fter   self-diagnosis   of   the   SCR   system.
A
  system   that   prevents   engine   starting   is   activated   automatically   from   650   miles   (1   100   km)   after   confirmation   of   a   fault   with   the   SCR   emissions  
c

ontrol   system.   Have   the   system   checked   by   a   CITROËN   dealer   or   a   qualified   workshop   as   soon   as   possible.
In the event of the detection of a fault
du
ring an authorised driving phase (between
650 miles and 0 miles) (1 100 km and 0 km)
The
 
UREA,   SERVICE   and   diagnostic   warning  
l

amps
  comes   on,   accompanied   by   an   audible  
s

ignal
  and   the   display   of   the   message  
"

Emissions
 f
ault".
The
 
alert   is   triggered   when   driving   when   the  
f

ault
 
is   detected   for   the   first   time,   then   when  
s

witching   on   the   ignition   for   subsequent  
j

ourneys,   while   the   fault   persists. If   a   fault   with   the   SCR   system   is   confirmed   (after
 3

0   miles   (50   km)   covered   with   the   permanent
 d

isplay   of   the   message   signalling   a   fault),   the
 S

ERVICE   and   engine   diagnostic   warning   lamps
 c

ome   on   and   the   UREA   warning   lamp   flashes,
 a

ccompanied   by   an   audible   signal   and   the
 d

isplay   of   a   message   (e.g.:   "Emissions   fault:
 S

tarting   prevented   in   150   miles")   indicating   the
 r

emaining   range   express   in   miles   or   kilometres.
While   driving,   the   message   is   displayed   every
 3

0   seconds   while   the   fault   with   the   SCR   system
 p
ersists.
The   alert   is   repeated   when   switching   on   the ig

nition.
You
  should   go   to   a   CITROËN   dealer   or   a
 q

ualified   workshop   as   soon   as   possible.
Other wise, you will not be able to restart your
engine. You
  have   exceeded   the   authorised  
d

riving   limit:   the   starting   prevention  
s

ystem   inhibits   engine   starting.
Every 
time  the  ignition  is  switched  on,  the  SERVICE a
nd   engine   diagnostic   warning   lamps   come   on   and t

he   UREA   warning   lamp   flashes,   accompanied   by
 a

n   audible   signal   and   the   display   of   the   message
 "

Emissions   fault:   Starting   prevented".
Starting prevented
To
  be   able   to   start   the   engine,   you   must   call   on  
a

  CITROËN   dealer   or   a   qualified   workshop.
Practical information

269
DS3_en_Chap11c_SMEGplus_ed01-2015
7-inch touch screen tablet
gPS satellite navigation - Multimedia audio - Bluetooth® telephone
Contents
First steps
2 70
Steering
 
mounted
 
controls
 
2
72
Menus
273
Navigation
 2

74
Navigation
 
-
 
Guidance
 
2
82
Tr a f fi c
 2

8 6
Radio Media

2
88
Radio
294
DAB
 
(Digital
 
Audio
 
Broadcasting)
 
radio  
2
96
Media
298
Settings
 3

02
Internet


310
Internet browser
3

11
MirrorLink
® 314
T
elephone
3
16
Frequently
  asked   questions  
3
24
The
 
system
 
is
 
protected
 
in
 
such
 
a
 
way
 
that
 
it
 
will
 
only
 
operate
 
in
 
y

our
 
vehicle. As
 
a
 
safety
 
measure,
 
the
 
driver   should   only   carry   out   operations  
w

hich
 
require
 
prolonged
 
attention   while   the   vehicle   is   stationary.
The
 
display
 
of
 
the
 
energy
 
economy   mode   message   signals  
t

hat
 
the
 
system
 
is
 
about
 
to
 
go
 
into   standby.   Refer   to   the   Energy  
ec

onomy
 (

mode)
 s

ection.
Audio and Telematics

DS3_en_Chap11c_SMEGplus_ed01-2015
First steps
Use the buttons arranged below the touch screen   tablet   for   access   to   the   menu   carousel,  
t

hen press the virtual buttons in the touch
screen
 t

ablet.
Each
  menu   is   displayed   in   one   or   two   pages  
(

primary   page   and   secondary   page).
Secondary
 p

age
Primary
 pag

eIn
  very   hot   conditions,   the   system   may  
g

o   into   stand-by   (screen   and   sound  
c

ompletely   off)   for   a   minimum   period   of  
5 m

inutes.

271
DS3_en_Chap11c_SMEGplus_ed01-2015
Selecting the audio source (depending on version):
-
 
"
FM"   /   "AM"   /   "DAB"*   stations.
-
 
"
USB"   memory   stick.
-
 
J
ukebox*,   after   first   copying   audio   files   to  
t

he   internal   memory   of   the   system.
-

T
elephone connected by Bluetooth* and
audio
  streaming   Bluetooth*   (streaming).
-
 
M
edia   player   connected   to   the   auxiliary  
s

ocket   ( jack,   cable   not   supplied). *
  Depending   on   equipment.
Short-cuts:
  using   the   touch   buttons   in   the   upper  
b

and of the touch screen tablet, it is possible
to   go   directly   to   the   selection   of   audio   source,  
t

he   list   of   stations   (or   titles,   depending   on   the  
s

o u r c e).
The screen is of the "resistive" type, it
is  
n
ecessary  
t
o  
p
ress  
f
irmly,  
p
articularly  
f

or   "flick"   gestures   (scrolling   through   a  
l

ist,   moving   the   map...).   A   simple   wipe  
w

ill   not   be   enough.   pressing   with   more  
t

han   one   finger   is   not   recognised.
The   screen   can   be   used   when   wearing  
g

loves.   This   technology   allows   use   at  
a

ll
 t
emperatures.
Following
 p
rolonged
 ope
ration
 i
n
 v
ery
 h

igh   temperatures,   the   volume   may   be
 l

imited   to   protect   the   system.   The   return   to
 n

ormal   takes   place   when   the   temperature
 i

n   the   passenger   compartment   drops.To clean the screen, use a soft
non-abrasive
  cloth   (spectacles   cloth)  
w

ithout   any   additional   product.
Do
  not   use   pointed   objects   on   the  
sc

reen.
Do not touch the screen with wet
hands.
Volume
  adjustment   (each   source   is  
i

ndependent,
 i
ncluding
 t
raffic
 a
nnouncements
 (

TA)   and   navigation   instructions).
Press Menu
 

to   display   the   menu  
c

arousel.
Increase   volume.
Reduce
  volume.
Audio and Telematics

275
DS3_en_Chap11c_SMEGplus_ed01-2015
Level 1Level 2 Level 3 Comments
na

vigation
Settings
na

vigation Enter destination
Display recent destinations
Calculatory criteria Fastest
Choose
  the   navigation   criteria.
The
  map   displays   the   route   chosen   according   to  
t

hese
 c
riteria.
Shortest
Time/distance
Ecological
To l l s
Ferries
Tr a f f i c
Strict-Close
Show
  route   on   map Display   the   map   and   start   navigation.
Confirm Save
  the   options.
Save current location Save
  the   current   address.
Stop navigation Delete
  the   navigation   information.
Voice synthesis Choose
  the   volume   for   voice   and   announcement  
o

f   street   names.
di

version Detour
  from   your   initial   route   by   a   determined  
di

stance.
na

vigation Display
  in   text   mode
Zoom
  in.
Zoom
  out.
Display
  in   full   screen   mode.
Use
  the   arrows   to   move   the   map.
Switch
  to   2D   map.
Audio and Telematics

1
7
8
12
9
13
10
14
11
15
2
3
4
5
6
277
DS3_en_Chap11c_SMEGplus_ed01-2015
Level 1Level 2 Level 3 Comments
na

vigation
Secondary page
Enter destination Address
Curr.
  location
Address
 se

ttings
Points of Interest
Town centre
Save Save
  the   current   address.
Add waypoint Add
  a   waypoint   to   the   route.
Navigate
  toPress
  to   calculate   the   route.
Contacts Addresses
Select
  a   contact   then   calculate   the   route.
View
Navigate
  to
Search for contact
Call
From map Display
  the   map   and   zoom   to   view   the   roads.
Itinerary Create, add or delete a waypoint or view the
itinerary.
Stop Delete
 n

avigation
 i
nformation.
n

avigate to Press
  to   calculate   the   route.
Audio and Telematics