2016 CITROEN DS3 CABRIO DAG audio

3
2
3
3
1
DS3_en_Chap11c_SMEGplus_ed01-2015
Press on Radio Media to display the
primary pag e.
Press Radio Media to display the
primary
 pag

e. Select "
Preset".
If   necessary,   select   change   of  
s

ource.Press on Radio Media
to display the
primary pag e.
Select
  change   source.
"
AM Radio ". By automatic frequency search
Select "FM Radio ".
" AM Radio ".
Press
  on   the   secondary   page. Select a preset radio station
in
  the   list.
Select " FM Radio ".
Select
  a   radio   station   from  
t

he   list   offered.
Select " Update list " to refresh the
list. Select " List"
  in   the   primary   page.
Or Press on Radio Media to display the
primary
 pag

e.
Radio
Changing a radio frequency
Selecting a station
OR THE
n
R

adio   reception   may   be   affected   by  
t

he   use   of   electrical   equipment   not  
a

pproved by CITROËN, such as a USB
charger   connected   to   the   12   V   socket.
The   exterior   environment   (hills,  
b

uildings,   tunnel,   car   park,   below  
g

round...)   may   prevent   reception,  
e

ven   in   RDS   station   tracking   mode.  T
his   phenomenon   is   normal   in   the  p
ropagation   of   radio   waves   and   is   in   no  
w

ay indicative of a fault with the audio
system.
Or
Select "
Radio list " in the secondary
page. Or
Press 3 or 4   to   move   the   cursor   for   an  
a

utomatic   search   down   or   up   for   a   radio  
f

requency.
Or

1
1
20
5
4
2
7
295
DS3_en_Chap11c_SMEGplus_ed01-2015
Select a radio station or frequency (refer to the corresponding s ection). Press on Radio Media
to display the
primary pag e.
Press
  on   the   secondary   page.
Select " Settings ".
Select " Radio".
Activate/deactivate
 " RdS
opt

ions".
Press on Radio Media
to display the
primary
 pag

e.
Press
 
on
 
the
 
secondary
 
page. Press on "
Preset".
Select
  a   number   in   the   list   to   preset   the  
p

reviously   chosen   radio   station.
A
  long   press   on   a   number   presets   (memorises)  
t

he   station.
Press on Frequency
.
Enter
 
the
 
frequency
 
in
 
full
 
(e.g.:
 
9

2.10 MHz)
 
using
 
the
 
keypad
 

then " Confirm ".
Changing radio station
Pressing
 
the
 
name
 
of
 
the
 
current
 
radio
 
station
 
b

rings
 
up
 
a
 
list.
To
 
change
 
radio
 
station
 
press
 
the
 
name
 
of
 
the
 
de

sired
 s

tation. Or
Press on Radio Media to display the
primary
 pag

e.
Select " Save".
Preset a station Activate/ de activate RdS
OR
THE
n
A p

ress on this button presets all of
the
  stations   one   after   the   other.
Recall pre-set stations
RDS, if activated, allows you to continue
listening  to   the   same   station   by   automatic r

etuning   to   alternative   frequencies.
 H

owever,   in   certain   conditions,   coverage
 o

f   an   RDS   station   may   not   be   assured
 t

hroughout   the   entire   country   as
 r

adio   stations   do   not   cover   100   %   of
 t

he   territory.   This   explains   the   loss   of
 r

eception   of   the   station   during   a   journey.
Audio and Telematics

DS3_en_Chap11c_SMEGplus_ed01-2015
Display of options:
i f   active   but   not   available,   the   display   will   be   greyed   out,
if
  active   and   available,   the   display   will   be   blank. Display
  of   "Radiotext"   for  
t

he   current   station.
Manage   the   Jukebox.
Display   current   action.
Select   the   audio   source.
Display   the   "DAB"   band.
Display
 
of
 
the   name   of   the  
c

urrent
 
station.
Short-cut:   access   to   the   choice   of   audio  
s

ource   and   the   list   of   stations   (or   titles,  
d

epending   on   the   source).
Select   the   radio   station.
Any
 
thumbnail
 
broadcast
 
by
 
t

he
 
station.
Preset stations, buttons 1
to 15
Short
 
press:
 
select
 
the
 
p

reset
 
radio
 
station.
Long
 
press:
 
preset
 
a
 
radio
 
s

tation. Next
 "
Multiplex".
Next   radio   station.
Secondary p
age.
Display
 
the
 
name
 
and
 
n

umber
 
of
 
the
 
multiplex
 
ser

vice
 b

eing
 u

sed.
Previous
 "

Multiplex".
Previous
 
radio
 
station.
DAB (Digital Audio Broadcasting) radio
If the "DAB" radio station being listened to is not a
vailable   on   "FM",   the   "DAB   FM"   option   is   greyed   out.
Journaline® is a text-based information service designed for digital radio systems.
I
t
 
provides
 
text-based   information   structured   around   topics   and   sub-topics.
This
 
service   is   available   from   the   "LIST   OF   DAB   STATIONS"   page.

31
20
297
DS3_en_Chap11c_SMEGplus_ed01-2015
Select change of source.
P ress on Radio Media
to display the
primary
 pag
e.
Select "
d
AB Radio ".
Select " List"
  in   the   primary   page.
Select
 
the   radio   station   from   the   list   offered.Press on Radio Media
to display the
primary
 pag
e.
Press   on   the   secondary   page.
Select " Settings ".
Select " RA
d

IO".
Select "
di

gital/FM auto
tracking " then "Confirm ".
dAB / FM auto trackingdi
gital radio
"DAB" does not cover 100% of the t
e r r i to r y.
When
  the   digital   radio   signal   is   poor,  
"

DAB / FM   auto   tracking"   allows   you   to  
c

ontinue   listening   to   the   same   station,  
b

y   automatically   switching   to   the  
c

orresponding   "FM"   analogue   station  
(

if   there   is   one). If
  "DAB / FM   auto   tracking"   is   activated,  t
here is a difference of a few seconds
when
  the   system   switches   to   "FM"  
a

nalogue   radio   with   sometimes   a  
v

ariation   in   volume.
When
  the   digital   signal   is   restored,  
the
  system   automatically   changes   back  
t

o   "DAB".
Digital
 
radio
 
provides
 
higher
 
quality
 r
eception 
and 
also 
the 
graphical 
display o

f
 
current
 
information
 
on
 
the
 
radio
 
s

tation
 
being
 
listened
 
to.
 
Select
 
"List"
 
in
 
t

he
 
primary
 
page.
The
 
range
 
of
 
multiplexes
 
available
 
is
 
d

isplayed
 
in
 
alphabetical
 
order. If
  the   "DAB"   station   being   listened   to  
i

s   not   available   on   "FM"   ("  d AB/FM"
option
  greyed   out),   or   "DAB   /   FM   auto  
t

racking"   is   not   activated,   the   sound  
w

ill   cut   out   while   the   digital   signal   is   too  
w

eak.
or
Select " Radio list " in the secondary
page.
Audio and Telematics

3
DS3_en_Chap11c_SMEGplus_ed01-2015
Media
USB playerSelection of source
The steering mounted SRC (source)  b
utton   can   be   used   to   go   to   the   next  
m

edia   source,   available   if   the   source  
i

s   active.
Select
  change   of   source.
Press on Media
to display the
primary
 pag
e.
The
 
system
 
builds
 
playlists
 
(in
 
temporary
 
m

emory),
 
an
 
operation
 
which
 
can
 
take
 
from
 
a

 
few
 
seconds
 
to
 
several
 
minutes
 
at
 
the
 
first
 
c

onnection.
Reduce
 
the
 
number
 
of
 
non-music
 
files
 
and
 
the
 n
umber
 
of
 
folders
 
to
 
reduce
 
the
 
waiting
 
time.
The
 
playlists
 
are
 
updated
 
every
 
time
 
the
 
i

gnition
 
is
 
switched
 
off
 
or
 
connection
 
of
 
a
 
USB
 
m

emory
 
stick.
 
The
 
lists
 
are
 
memorised:
 
if
 
they
 
a

re
 
not
 
modified,
 
the
 
subsequent
 
loading
 
time
 
w

ill
 
be
 
shorter.
Insert
 
the
 
USB
 
memory
 
stick
 
into
 
the
 
USB
 
port
 
o

r connect the USB device to the USB port
using
 
a
 
suitable
 
cable
 
(not
 
supplied).
Auxiliary socket (AUX)
Connect the portable device (MP3 player…) to t
he   auxiliary   Jack   socket   using   an   audio   cable  
(

not
 sup
plied).
First
  adjust   the   volume   of   your   portable   device  
(

to   a   high   level).   Then   adjust   the   volume   of   your  
a

udio   system.
Display
  and   management   of   the   controls   are  
v

ia   the   portable   device. Choose
  the   source.

299
DS3_en_Chap11c_SMEGplus_ed01-2015
The audio equipment will only play audio files with".wma,   .aac,   .flac,   .ogg   and.   mp3"   file  
e

xtensions   and   with   a   bit   rate   of   between  
32
  Kbps   and   320   Kbps.
It
  also   supports   VBR   (Variable   Bit   Rate)   mode.
No
  other   type   of   file   (.mp4,   ...)   can   be   played.
".wma"
  files   must   be   of   the   standard   wma   9   type.
The
  sampling   rates   supported   are   11,   22,   44  
a

nd   48   KHz.
It
  is   advisable   to   restrict   file   names   to  
20
  characters,   without   using   of   special  
c

haracters   (e.g.:   "   "   ?   ;   ù)   to   avoid   any   playing  
a

nd
 d
isplaying
 pro
blems.
Information and advice
Use only USB memory sticks formatted FAT32 (file   allocation   table).
The
 
system
 
supports
 
USB
 
mass
 
s

torage
 
portable
 
players,
 
BlackBerry
®
devices or Apple® players via USB
ports.
 
The
 
adaptor   cable   not   supplied.
Control of the peripheral device is with
the
 
audio
 
system
 
controls.
Other
 
peripherals,   not   recognised   on  
c

onnection,
 
must
  be   connected   to   the  
a

uxiliary
 
socket
 
using   a   Jack   cable   (not  
sup

plied). It
  is   recommended   that   the   USB   cable  
f

or   the   portable   device   is   used.
The system does not support the simultaneous connection of two identical devices
(two memory
  sticks   or   two   Apple
® players) but i
t
 
is
 
possible
 
to
 
connect
 
one
 
memory   stick   and o

ne Apple
® player at the same time.
Audio and Telematics

DS3_en_Chap11c_SMEGplus_ed01-2015
Bluetooth® audio streaming
Streaming allows audio files on your telephone to   be   played   through   the   vehicle's   speakers.
Connect
  the   telephone:   see   the   "Telephone "
section, then " Bluetooth".
Choose the " Audio" or "All"
 pro

file.
If
  play   does   not   start   automatically,   it   may   be  
n

ecessary   to   start   the   audio   playback   from   the  
t

elephone.
Control
  is   from   the   peripheral   device   or   by  
u

sing   the   audio   system   buttons.
Once
  connected   in   streaming   mode,  
t

he telephone is considered to be a
media
  source.
It
  is   recommended   that   you   activate  
"R

epeat"
  on   the   Bluetooth   peripheral.
Connecting Apple® players
Connect the Apple® player to the USB port
using
 
a
 
suitable
 
cable   (not   supplied).
Play
 
starts
 
automatically.
Control
 
is
 
via
 
the
 
audio   system. The classifications available are those
of the portable device connected
(artists
  /   albums   /   genres   /   playlists   /  
a

udiobooks   /   podcasts).
The default classification used is by
artist.   To   modify   the   classification   used,  
r

eturn   to   the   first   level   of   the   menu  
t

hen select the desired classification
(playlists   for   example)   and   confirm  t
o   go   down   through   the   menu   to   the  
de

sired
 t
rack.
The
  version   of   software   in   the   audio   system  
m

ay   not   be   compatible   with   the   generation   of  
y

our Apple
® player.

12
13
15
301
DS3_en_Chap11c_SMEGplus_ed01-2015
Managing the Jukebox
Connect the device (MP3 player...) to the USB port   or   auxiliary   Jack   socket   using   a   suitable  
a

udio   cable.
When no audio file is copied to the
system,
  which   has   a   capacity   of   8   GB,  
a

ll   of   the   Jukebox   function   symbols   are  
g

reyed   and   are   not   available.
Select " Media list ". Select
  the   magnifying   glass   to   enter  t
he   folder   or   album   and   select   audio  
f

ile   by   audio   file.
Select copy " Copy Jukebox ". Select "
Confirm " then "Copy".
Select " Sor t by folder ". Select "
ne

w folder" to create a
folder
  structure   in   the   Jukebox.
" Sor t by album ". Select "
Keep structure " to retain the structure
from
  the   device.
While
  copying   the   system   returns   to   the  
p

rimary   page;   you   can   go   back   to   the   copy   view  
a

t   any   time   by   selecting   this   button.
Or Or
Audio and Telematics